Liquid transfer pump

[Saucymynx]

I’m not sure where this post fits best so I stuck it here. What do you all use for a liquid transfer pump? I need to transfer liquid hay preservative from the storage tank into the tank on my baler. The liquid is more viscous than water but less viscous than oil. It is not really corrosive. It’s a mild acid. I have a hand pump but that is tedious. What do you guys like for a 12 V transfer pump? Thanks.

 

[cmyoung2]

It's been a few years, but I think I used the same 12v pump I sprayed with. As in had a Tee on the inlet side with a hose to go into the bulk tank. I am assuming your applicator uses a 12v pump to spray the preservative. If not, any of the 12v pumps designed for small sprayers like for ATV's would work fine.

 

[TractorTech]

Agree on a spray pump like a Hypro Shurflo diaphragm pump or equivalent