Lakeside57
New member
Inherited a 1968 JD 1520 tractor. PTO lever is not between shifters. On left side there is a lever for either 540 or 1000. But cannot find the lever to engage the PTO. Help Please!
JD 1520 PTO lever
- Thread starter Lakeside57
- Start date
- Views: 490
-
- Tags
- jd jd 1520 pto pto
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,537
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Put up a photo of your controls, and figure the PTO lever will be obvious to one of our members and help solve the mystery.
2 stage clutch ??
2 stage clutch ??
Last edited:
Tx Jim
New Member
You can download a free 1520 operators manual @ https://techpubs.deere.com/en-US/Search/Equipment.
PTO control lever should be on LH side of trans case. In order to change speeds from 540-1000 one must change rear shafts. Dual stage clutch controls the traction & pto clutches.
PTO control lever should be on LH side of trans case. In order to change speeds from 540-1000 one must change rear shafts. Dual stage clutch controls the traction & pto clutches.
OP
Lakeside57
New member
Thanks guys for your help. I did figure it out. It’s a lever I thought was correct, but being a double clutch it was throwing me off.
I did go into the web site suggested but all information had a price.
Again, great site and thank you both.
I did go into the web site suggested but all information had a price.
Again, great site and thank you both.
Tx Jim
New Member
Go to website look up correct serial # range for your 1520 then click on ""down arrow"" shown in photo below in order to download a free OM.
