Search results

Results 401 to 527 of 527
  1. N

    Changing coolant yearly or lack thereof.

    I only trust a refractometer anymore,not those hydrometers. For the Kubota's I mix green coolant 50/50 with distilled water.
  2. N

    B2301 SB Attachment Q

    A guy I know has a B2301,and added a blower awhile back. If memory serves,a Bx5455? An all gear model,no chain? Good Luck & welcome!
  3. N

    Radiator plastic repair

    Also check out Rapid-Fix. A super glue with welding powder. Body shops fix all kinds of stuff with it. Their video shows repairing a plastic radiator tank. Good Luck!
  4. N

    Bolt Size Help

    I like my Thexton 432 Universal Thread Gauge pack. 4 pieces,measures pitch and diameter. Under $14 M14x1.50 is still my guess.
  5. N

    Snow Kubota B7800 I want a front snowblower and subframe but my local dealers are unsure of what I need.

    I think we posted last year about subframe and mid PTO kits for B Series tractors. B2710,B2910,B7800,B2630,and B3030. My blower install manual listed these models with the same subframe,only the mid PTO kits were different. And older B7800 models used a longer subframe. It may be possible...
  6. N

    Bolt Size Help

    I apologize,GM trucks are M14x1.50. Sorry for the error! Don't count 14 out.
  7. N

    Bolt Size Help

    14 MM isn't that uncommon. Our B3030 uses M14x2.0 for the grille guard attachment-think recent GM pickup wheel nuts. Good Luck!
  8. N

    Kubota insurance and rodents

    I'm getting my traps ready for mouse season. Last count was 67 mice trapped in 5 buildings last two years total. Way more than we've seen before!
  9. N

    Front axle oil GL-4??

    Kubota manuals are woefully out of date on fluid specs. Been that away as long as I can remember. Maybe someone that speaks/reads Japanese could get a position editing Kubota literature. Forget that-nobody works anymore!
  10. N

    Kubota Interim Tier IV Motor Oils

    Maybe not of interest here,but 2 cycle Detroit Diesel engines still require CF-2 straight weight oil. Had 6 of them back in the old days-fun times!
  11. N

    Kubota Interim Tier IV Motor Oils

    Exhaust Gas Recirculation (EGR) is often misunderstood. Exhaust is introduced into the combustion chamber,which dilutes the oxygen level in the chamber. This results in a lower combustion chamber temperature,thereby reducing NOx emissions.
  12. N

    B2650 - First tractor

    Welcome! Are any preventative maintenance services due soon? Good time to get them handled before winter. Best of Luck!
  13. N

    RTV1100 Heater not working

    Coolant temperature low on the gauge,if you have one? Upper radiator hose warm or hot after use? Are the heater hoses warm or hot? Thermostat stuck open-maybe. Good Luck & post back!
  14. N

    Galvanized bolts? Need 36 carriage bolts, washers and nuts

    I sure don't understand why the Line 5 tunnel is a bad thing! I'll leave it that so it's not political.
  15. N

    Kubota B7300 No start

    I'd start by jumping the starter to bypass everything,to prove the starting system is functional. Place tractor in neutral,set brake,apply battery power to the small terminal at the starter momentarily. If it cranks,or runs,you will have a new direction to pursue in troubleshooting. Post back...
  16. N

    Galvanized bolts? Need 36 carriage bolts, washers and nuts

    My wife has that decal on her camper-salt free and shark free-good stuff!
  17. N

    L6060 3rd Function Curl and Close Grapple Simultaneously

    Welcome! May I suggest posting on the Kubota Owning/Operating Forum for better results.
  18. N

    Kubota b2630 will not start

    More information please! Does it turn over or not? Good Luck & Welcome!
  19. N

    stopped up grease joint

    To the OP,a 1/4 x 28 is the very most common grease fitting on the planet. It is 1/4 x 28NF(National Fine)-28 threads per inch. They usually have a head size of 9/32 " or 5/16 ". Any auto parts store,farm store,etc.,will have them. Good suggestions here! Good Luck!
  20. N

    Kubota rtv900

    Have you measured the voltage with the engine running,with a voltmeter? If your charging system is not functioning,the voltage will be battery voltage-about 12.5 volts DC. A properly operating charging system will produce about 14 volts. If you are looking at your voltmeter on the dash(if you...
  21. N

    BX1500 HST Leak

    May I suggest posting in the Kubota Owning Operating Forum? Alaska members are here and may chime in. I believe member 5030 uses that Chevron fluid. Other tractor users in your area are using something that works. Even a local fuel/lubricant distributor will have a suitable product. Visited the...
  22. N

    BX1500 HST Leak

    What do the Alaska dealers sell? Surely there must be a dealer in Alaska? We would be happy to discuss alternative fluids. Alaska has so many different climate zones! Good Luck!
  23. N

    BX1500 HST Leak

    i'm sure any of the popular UV dyes for oil/transmission/hydraulic fluids will be fine. U-View comes to mind,as does Dye-Lite,and many others. Heck,almost every AC system that has been serviced,and some that haven't,have UV dye in it. No worries! The kits come with a blacklight and those yellow...
  24. N

    Kubota F warning lights

    I believe it would certainly do the trick. Best of Luck!
  25. N

    Glow Plug Voltage

    A fully charged 12 volt battery will read 12.6 volts. 6 cells @ 2.1 volts per cell. A 6 volt battery will read 6.3 volts(3 cells @ 2.1 volts each). Charging voltage will read 14 volts +/- a bit. Not sure if this helps the glow plug question. Good Luck!
  26. N

    Ooops... I did it again. B2650 T/L/B to L3560LE-HSTC T/L/B

    Could a local glass shop replace that side window? I wouldn't be surprised if they can. Nice tractor! Good Luck!
  27. N

    New owner L3901, Mods to make it mine

    I bought a set from the guy on the other site. Nice stuff. Yours look good as well. I added a cheap parts store mat over the hump and tucked under the floor mats. Cool mods!
  28. N

    Kubota L2250 Alternator/Regulator no charge

    Sure sounds like you need a new alternator-running voltage at B should be about 14V. Reman unit or repair at starter shop next step. Good Luck! Post back please!
  29. N

    5 Eleven DesignZ, LLC

    I assume you're referring to his Kubota grill guard supplement protection? Nice Stuff! Got one for wife's L2501. Oh,your attachment didn't show in your post.
  30. N

    Glow plug light stays on

    If the glow plugs are energized,is your alternator keeping up or is the battery going dead? That must be like a 40-50 amp load. Good Luck!
  31. N

    b7800 hsd spline shaft

    Welcome! Ouch! You may also try posting in the Kubota Owning Operating forum for more results from the Kubota experts. Good Luck!
  32. N

    Suck, Squeeze, Bang, Blow, Go diesel go!

    Are you the new school teacher here? Good Stuff!
  33. N

    How manual transmissions work

    Good blast from the past!
  34. N

    Greasing a B21 BH Pivot

    I apologize for my incorrect figuring! I'm so used to seeing British Standard Pipe on the vast majority of imports,that I kind of think of them as metric. The thread checker looks cool!
  35. N

    Greasing a B21 BH Pivot

    Since the most of the Kubota attachments are North American,I figure the zerks are fractional. The Canadian snowblowers seem to be fractional as well. The tractors are of Asian manufacture-I figure their fittings are metric. YMMV
  36. N

    Greasing a B21 BH Pivot

    If you still want to change the zerks,they are most likely 1/4 x 28NF. If a little larger,then 1/8 NPT would work. Good Luck!
  37. N

    Kubota L4330 HST Running Temp and RPMS

    Maybe post in Kubota Owning/Operating Forum for better advice from the experts. If the tractor warms up as usual,the thermostat is normally not the problem. Do you watch the temp display as you begin to use the tractor? Good Luck!
  38. N

    Mowing Bent 60” Mower deck

    OK,but your problem should be another thread-not his bent mower problem.
  39. N

    Formal Training?

    1971 grad from an underfunded Catholic high school. Only the girls got to take typing. No shop type classes either. But I surely learned right from wrong! And respect for others,especially elders! Anyone from then I know have turned into excellent citizens!
  40. N

    Oil Gearbox Kubota B2320 UDT, Superudt or SuperUdt 2

    All the above fluids are good stuff,and will serve you well. I still like the Kubote Super UDT2 or equivalent-the Mobil 428 in your case-a better synthetic. Just do your maintenance-you'll be fine!
  41. N

    Steering wheel acting funny

    FWIW,one of our Texas members has three steering wheel spinner knobs on his Kubota with hydrostatic steering. Great thread!
  42. N

    Kubota fuel requirements.

    I would expect your ULSD to be seasonally adjusted for expected temps. Forgetting about dye is spot on. I can only imagine that the massive snow amounts you receive means it's not really that cold(i.e.Ocean Effect Snow) I now have the fuel guy fill my drums every June with summer fuel(max...
  43. N

    Oil Gearbox Kubota B2320 UDT, Superudt or SuperUdt 2

    Your B2320 with the hydrostatic transmission(gearbox) will be happiest with an Super UDT fluid-quieter operation and better cold weather performance. In warmer climates,UDT is OK,but Super is best and worth the money. Good Luck!
  44. N

    L5740 Stalling when pressing the hst pedal

    Whenever I hear this issue,my mind goes to seat switch. Seat switch isn't satisfied that someone is in the seat,then activates the shutdown solenoid. Good Luck!
  45. N

    Starting after hydro lock?

    I believe with indirect injection,the injector and glow plug thread into a pre-combustion chamber,which is open to the combustion chamber. So,in advent of a rollover,either could be removed to allow turning over the engine and avoiding hydro lock. Or wait until tomorrow and carefully bar the...
  46. N

    Kubota L3901 Alternator

    Thank You!
  47. N

    Kubota L3901 Alternator

    Look in the phone book for starter repair shops in your area. They can fix you right up! Good Luck!
  48. N

    Chain lube

    A recently deceased biker friend swore Lucas Oil Stabilizer was the best chain lube he had ever used,as he had tried them all. He was the best all-around gear-head-bodyman I've ever met. Lucas has preformed on my snowblower chain for 15 years with very few adjustments.
  49. N

    Authorized Kubota Warranty Service Provider? Part 2 of 3

    I sure hope they won't include this discussion in the Hot Topics e-mail we get. Nobody will have the time to read all of the replies!
  50. N

    What if....?

    You like having a tractor and can afford it. Don't worry about it. Resale or residual value will reward you long-term! Good Luck!
  51. N

    motor oil for AGCO st41a

    Oh-Welcome! You might want to obtain an Operators manual for your tractor. It will answer many questions. Should not be overly expensive.
  52. N

    motor oil for AGCO st41a

    Looking at tractordata.com,your has a 1.5 litre 3-cylinder diesel Iseki engine. Any 15W40 oil should be diesel rated,and be more than adequate for your needs. Extreme temperatures or synthetic preferences will bring other suggestions. Good Luck!
  53. N

    G6200 Trans filter

    Welcome! Try WIX 51361 or equivalent. Good Luck!
  54. N

    Another B7500 that decided not to start

    Try posting on the Kubota Owning and Operating Forum to get the best results from the experts. Good Luck!
  55. N

    Where did Rotella Gas Truck Oil go?

    I just checked NAPA and,though our local store does not stock it,they can overnite it from Chicago or Grand Rapids,etc. Show 99+ in stock. Maybe try them? Good Luck!
  56. N

    Fuel prices around the world.

    You betcha they are!
  57. N

    Kubota TG1860G video/maintenance links?

    Try posting on the Kubota Lawn & Garden forum here on TBN. Good Luck!
  58. N

    Torque Multiplier

    I have on occasion had luck when using an impact wrench not quite big enough for the task on hand-by swatting the impact socket with a 4# mini-sledge hammer while hammering on the fastener. Actually on quite a few occasions-really!
  59. N

    My relationship with L5740 just hit a rough patch...

    Sure seems like quite a few Grand L40 tractors need to be split for one seal,or the other. Good Luck!
  60. N

    Your last generator Maintenance Run

    Thanks,it's a 120/240 V generator.
  61. N

    Your last generator Maintenance Run

    Power out yesterday from noon until 9:30PM. Generic Generac 5500W box store unit. Parked it maybe 4 years ago with a dry carb and a fresh 5W30 synthetic oil change. Drug it out about 7PM ,added 3 gallons non-E gas-started 2nd pull. Ran fine,even tortured it with several well pump start-ups...
  62. N

    School me on how an ammeter works

    I remember the ammeters in '60's and '70's Dodges would wiggle around a lot! Good Luck!
  63. N

    Jump starting tractors

    A little humor:I jump started My 1978 GMC Astro with my dad's 1971 VW Bus-sure looked funny in the parking lot,that little van hooked to that big truck! I also had to jump that truck again once with the reefer trailer I was pulling,glad my cables were long enough. Batteries are lots better now...
  64. N

    Lucas Fuel System Treatment in Tractors?

    LOL-Lucas,father of darkness. Thankfully,not the same!
  65. N

    Lucas Fuel System Treatment in Tractors?

    Seems to get good reviews. Used to use it on GM 3100/3400 V6 engines to avoid injector issues. I remember when diesel was $5/gallon,Lucas had ads in trucking mags that the increased fuel mileage would more than pay for it's use. Good Luck!
  66. N

    Kubota Operator Protection Circuit OBC bypass

    Thanks for the explanation-we are bypassing the OPC and sending the start trigger current to the starter solenoid. I would assume that the OPC will still shutdown the engine if a safety switch is activated?
  67. N

    Kubota Operator Protection Circuit OBC bypass

    Cool! I wonder if this would work on other models? I've often wondered what I'd do when it happens to me.
  68. N

    3901 HST RPM for engaging PTO vs RPM for operation

    OMG-Please don't! Please let out the clutch smoothly at idle after you engage the PTO. Then,and only then,increase the RPMs. Good Luck!
  69. N

    Grinding noise in mid gear only- Kubota B3200

    Please post in the Kubota Owning Operating forum for better results. Good Luck!
  70. N

    Diesel Running Backwards

    Amen to that! My 1978 GMC Astro 9500 with a Detroit Diesel 6V92TT would do that pulling out of an uphill loading dock with a full load once and awhile. Imagine my surprise to see the tachometer needle bouncing off the bottom peg and hearing that funny sound! No wonder so many of those engines...
  71. N

    Mowing Kubota diesel overheating.

    It sure interesting how the new Hot Topics e-mails have boosted replies on the forum! Good Luck to the OP. I'm thinking radiator first.
  72. N

    Tires

    I like the best ride also. Both my units have turfs. Those new R14 tires look like a great combination of loader capacity,traction,and ride. But they were like $600 or $800 more on my new L2501-even more over R-1 tires. I settled for turfs again-good in snow,although I don't have snow duties in...
  73. N

    Kubota L3940 All the Sudden Won't Move and Hydraulics Won't Work

    This seems to be a Grand L 40 series issue. I never see complaints about the Grand L 10,30 &60 series. Good Luck!
  74. N

    Put a Turbo on a B2630 good or bad

    Gee,the B2630 ,a premium "B" model. is a very nice tractor for it's era. 3 cylinder engine without the vibration issues of some 4 cylinder models. Strong hydraulics. What a shame to deface a sweet,iconic model!
  75. N

    Is this what water in diesel looks like?

    When I had diesel and gas road vehicles,I would fuel up at different stations so I would remember which product to buy.
  76. N

    Greasing my L4060

    Maybe consult your operators manual? You may have a front axle pivot to grease with a very tight 7MM pipe plug to remove. Again,check the instructions. Good Luck!
  77. N

    New kubota delivered with low Transmission oil

    That's been a "B" series quirk for some time. Quite normal.
  78. N

    Snow Equipment Owning/Operating Pictures of your snow weapons

    Looks nice! Nice job. 1-7/16 is like 36MM,much more common. Good Luck!
  79. N

    New kubota delivered with low Transmission oil

    I'm curious-why would low hyd oil cause a no-start condition?
  80. N

    Grapple for new L2501

    Nice unit! Thanks for posting. Hoping to see the Landpride soon.
  81. N

    Rebuilt diesel blue smoke and rattle only sometimes

    Agree with above. Since you installed rebuilt fuel injectors,one of them could very be not very well rebuilt. Good Luck!
  82. N

    Air ratchet repair.

    You are correct about shifting into neutral. Wiggle the knob a little while you try to remove the head kit. It will come out. No amount of lube will overcome the worn parts. Search CP828 head kits. Techs used to keep the head soaking overnight in ATF to help with service life. Body shop guys...
  83. N

    Hst light

    Might want to post at Kubota Owning Operating forum for the experts to reply. Good Luck!
  84. N

    Air ratchet repair.

    You simply need a head repair kit. The ratchet pawl and springs are worn out. I sold and rebuilt hundreds during my many years with Mac Tools. Probably can buy them online by now. Most are generic. Don't know your model,but the CP828 with the gold knob was different. Flip over,remove snap...
  85. N

    B26 repair of broken u-joint on front drive shaft at HST output

    Anymore,when I think about all those OEM Spicer u-joints in pickups and rear wheel drive cars,that seem to last a very long time,without grease fittings,I'm in the sealed crowd now.
  86. N

    Replacement mirror.

    I recall my friend who does snowmobile trail grooming said they broke quite a few mirrors,and the dealer had the mirror lens inserts in stock! Good Luck!
  87. N

    Pisten Bully 400 service and operations

    Cool-Thanks for the update. Hope Michigan doesn't have a drought year after the low snowfall this season.
  88. N

    Floor mat for L2501?

    That does look quite good,Varmint. I did order the floormats,but may use your idea for the center cover. Again,thanks for all the replies!
  89. N

    Floor mat for L2501?

    Thanks guys! I think I'm signed up there. Where should I make the first post?
  90. N

    Floor mat for L2501?

    Text Ken @ 864-633-9664 for the floormats.
  91. N

    Floor mat for L2501?

    Awesome! Anyone have his e-mail or contact info? I'm not on OTT. Should I be? Thank you again!
  92. N

    Floor mat for L2501?

    Has anyone added a floor mat of some kind on an L2501? I'd like to put something over the metal flooring,and I'm not sure how much I would like the bedliner treatment. Thanks in advance for your comments!
  93. N

    What Do You Do With Your Waste Oil?

    About 15 years ago,when oil was $150/barrel and diesel was $5/gallon,shops were paying a buck or more for waste oil for their furnaces. The way oil prices seem to be heading,it may become valuable again!
  94. N

    Snow B3030HSDC joystick freezing up in bitter cold

    How did your problem get resolved? I'm sure I will be in the same place down the road. Thanks for posting.
  95. N

    Grapple for new L2501

    Have checked out Horst(HLA)-a little heavy,but available. Virnig-real nice stuff,but 3+months. Kubota dealer getting Landpride SGC0660 in 5-6 weeks. They will put my name on one,but won't be obligated if I don't like. Looks decent on paper-250#,good steel. Will most likely go this way as decent...
  96. N

    Grapple for new L2501

    Once again,very good thoughts! Thank you. Still weighing the options.
  97. N

    Ethanol free gas?

    Your plan to mix 50/50 93 and 87 octane should yield 90 octane. Yes,the math works. Good Luck!
  98. N

    Grapple for new L2501

    Thanks for all the replies! Ordered the build today. Called MTL today-5-10 working days. Will see what the dealer can offer in Landpride and Paladin.
  99. N

    Grapple for new L2501

    The EA grapples look appealing. Gave them a call today. 13 week build time across the board-wow!
  100. N

    What oil are you using

    Perfectly fine for either tractor. Good Luck!
  101. N

    Fuel prices around the world.

    Wise men we have here! Berkshire Hathaway has provided us a hopefully well funded retirement. Doubled down last year on COP when the market crashed.
  102. N

    Grapple for new L2501

    Thank you for the feedback. Worthy of consideration.
  103. N

    Grapple for new L2501

    Indeed it is nice. I'll be paying the $800 cover charge for the third function anyway.
  104. N

    Grapple for new L2501

    Thanks for your input. I've seen several decent reviews on YouTube for the MTL.
  105. N

    Grapple for new L2501

    Actually,wife wants the "claw". So I thought we'd get another tractor that she will use. She won't go near my tractor-that's OK though. Go figure!
  106. N

    Bx1860 won't even click when I turn the key

    Could be a problem with the shut down solenoid,or the shut down timer.
  107. N

    Grapple for new L2501

    Getting a new L2501 before months end. Will be grapple ready. What does everybody like for smaller grapples? I see MTL grapples seem to be the price leader. Everything Attachments and Landpride also out there. Thank you in advance for your comments!
  108. N

    Kubota B2920 Rims/Tires

    Your most effective solution will be to go your Kubota dealer. See a salesman and price rims and and tires thru Whole Goods. The rims will be different. Welcome and Good Luck!
  109. N

    BX-25 starts after jiggling the HST lever

    Try greasing the HST pedal. I think it's under the floormat. Common problem.
  110. N

    Grease Gun Recommendations

    Sold many in my last career selling auto parts before retirement. New format-ugh!
  111. N

    Grease Gun Recommendations

    Yes,very decent.
  112. N

    TripleR

    I know TBN members come and go,but I've not seen any posts from super member TripleR for some time. I surely hope things are well for him.
  113. N

    Super Clean vs. soot

    Some time back I picked up a spray bottle of Super Clean after seeing an ad on TV. When I removed my front snowblower this spring,the left side was covered in soot as usual. Well,I sprayed some Super Clean on it and tried to rinse it off with the water hose. No dice! So I wiped it off with a...
  114. N

    Oil change with Form-a-Funnel

    I occasionally see B3030 owners wondering how to do a neater oil change. The loader mount is directly under the oil pan drain plugs. There are two access holes in the mount for socket clearance,but no way will the oil flow through them! Enter the Form-a-Funnel. It's a 6 1/2" x 14 1/2" flexible...
  115. N

    B3030 Front Axle pivot adjustment

    Howdy:About a month ago I decided it was time to make the 400 hour front axle pivot adjustment on our B3030 tractor. So,I followed the operators manual procedure which calls for loosening the pivot adjusting screw locknut(17mm wrench),tighten the adjusting screw to 15 lb/ft(14mm socket),back...
  116. N

    B2782 snowblower lubrication question

    Just installed the B2782 blower today in preparation for winter. I've always fought greasing the front universal joint on the front mid-PTO driveshaft.The very front one,at the input to the blower,surrounded by the metal guard and the driveshaft safety guard.I usually manage to get the grease...
  117. N

    L3540HST service question-short

    This weekend I'm doing the 50 hour service on my neighbors one year old L3540HST before we put on his front blower.I'm very familar with Kubota servicing,but have a question.We're going to do a quick filter change on the HST and hydraulic systems,not changing the fluid.I have fluid on hand,but...
  118. N

    L3010HST Service question

    A good friend and neighbor passed on last year.He was "roadtrash" here on TBN.Anyhow,his widow(nice people)needs his tractor serviced-another friend keeps her snow handled and I feel like I should handle the maintenance end.I've been going through the operators manual and all their receipts to...
  119. N

    Grading  B7610 Rear Blade Size

    My friends father was admiring my 6' rear blade,a Woods RB72.I like it and it works well for me on my B3030HSDC.Anyhow,he has a B7610 and we're wondering if the same blade would work on his tractor.I'm sure it would mount up,but it sure is nice to be able to turn it around while attached.We live...
  120. N

    FORD 4000 Not Charging

    A friends Ford 1966 4000(actually a 4101 model) has the charging system warning lamp on and a voltage check at the battery shows 12.5 volts at 1500 RPM-obviously not charging. I'm hoping someone could help me with troubleshooting suggestions. It's been just too long since I've worked with a...
  121. N

    FORD 4000 Valve Adjustment

    Greetings-A friends neighbor dropped off his !966 Ford 4000 diesel for a general service job,which I can do this winter in my spare(?) time. I owe my friend big time,so I'll make the time for it. The usual-oil change,coolant exchange,grease,fuel filters,new tie rod end,new lower radiator hose...
  122. N

    Turf Saver for B2782 Snowblower

    My friend finally dropped off my new Turf-Saver pipe for my new snowblower. I've been tearing up the driveway and blowing gravel,scratching up the new blower,skid shoes just don't cut it. I've finally got it on and will find out tomorrow how well it works. He made me one for my old B2660 blower...
  123. N

    B2782 Blower Chain Lubrication

    I've got 3 hours on my new B2782 snowblower. I see in the manual it calls for chain lubrication every 4 hours. I've been wondering what to use and how to apply it. On my previous B2660 blower,I was able to remove the chain cover by removing 2 screws,giving access to the top of the chain...
  124. N

    USE OLD POWER SERVICE W/ULSD FUEL?

    Been thinking about posing this question for some time-Is there anything wrong with using older fuel additives with ULSD fuel? I have several jugs of Power Service as well as some OTR and some other stuff as well. People give me the stuff because they know I'm a diesel nut. Well,I've...
  125. N

    LAWN KING COPYCAT

    Been meaning to join since getting the new B3030HSDC just before the Good Friday snowstorm. Just now got the prerequisite photos to post. Thought about the B3030HSDCC,but couldn't see almost $400 for the rear wiper,defogger,and 60 amp alternator. Traded off a 1992 B17540HST with FEL,MMM,and 60"...
Top