Search results

I would like to sell the 72"mm from my B2650 but not sure what I should ask for it. It was only used one season, always stored inside, blades were sharpened and gear box oil changed before being put away for the winter.I have all the mounting hardware and manual for it. I decided to switch to a...

After spending 4 hrs today replacing the hydro fan on my bx1850, I think its time for a skid plate. Most of the time I have the mmm attached. Are any of the plates, bro tek, bxpanded, compatible with the mmm? Any pros or cons to one or the other? Thanks

Here is a couple pics of my homemade bed debris blocker. I've seen some aftermarket kits that go for about $150.00! I have about $20 in this. I used a 4 inch x 5ft piece of baler belting from TSC and a strip of aluminum and a couple pop rivets and works very well.

Here's a couple photos of my new U17 that was delivered last week! I know how everyone likes to see pictures!

I'm thinking of adding some rear tire chains to my B2650 with R4 tires for the winter. I'm wondering how much sidewall clearance I will need for the chains. I have a little over two inches between the tire and the closest part of the inner fender. I know Kubota offers wheel spacers to give me...

Just Got my new grapple installed today!! Can't wait to use it!!!

Does anyone have any experience with the Landpride QH15 quick hitch? Will it fit with the telescoping lower lift arms? I have a Pat's easy change I removed from my L3400 but it will not fit on my new B2650 because of the telescoping arms. I asked my dealer and he said he has never even sold one...

Here's the pics of my new B2650, got the quick attach plow, Landpride pallet forks, two remote valves, 72mmm and 5ft box blade. I also ordered the new Landpride grapple but they are not going to start building them until April. Can't wait to use it!!!

Yesterday I got a quote from my dealer on a new B2650 with a loader, mmm, box blade, grapple and third function and 2 rear remotes. He is willing to take my B2710 and L3400 on trade and I feel he is giving me a good number on them. My issue is he wants me to pay msrp on all the new stuff plus...

Does anyone have the new snow blade that mounts to the loader quick attach? I'm assuming its manual angle? If it is I wonder if it could be easily converted to hydraulic? Does anybody have any feedback on them? Thanks

Does anyone have pics of the quick attach plate on the back of the bucket from an LA463 loader? I am thinking of converting mine and would like to see what they look like. Thanks

I have three hooks welded to the top of my FEL bucket that I need to remove. I'm trying to figure out the best way to remove them without destroying the bucket lip underneath. Would a torch or a plasma cutter be my best bet. Thanks

I am thinking about ordering the bucket Thumb from Greens-Machine for my L3400 with the 463 loader and I am trying to decide what size I need. I was thinking the 20' or the 24'. Any input would be appreciated, thanks.

I finally got a chance to take some of pics of my new RTV900. I purchased it from Phil's Sales and Service in Columbiana, OH. They were recomended to me in a previous post, and I have to say they are top notch to deal with! They really know their products and have a large inventory. They are...

I am thinking of buying a new RTV900XT and I went on the Kubota site and built the one I want with options. How much should I be able to get off the MSRP? I would like to have an idea before I go to my local dealer. Thanks

I have a pasture that is approximately 4 acres that I like to keep mowed. It has decent grass growing now and looks good when its mowed. My problem is how rough the ground is. It takes me a long time to mow it because I have to go so slow. I would like to smooth it out but I really do not want...

Yesterday I drove by my dealers lot and saw a used B2710 with a Curtis sunshade and a 72' mmm on the lot. I stopped and looked it over, it has 834hrs but you could never tell by looking at it. Whoever owned it took excellent care of it. The three point arms did not look like they had even been...

I have ag tires on my L3400 and was thinking it would be nice to also have a set of turfs for mowing. Has anyone priced new wheels and turf tires from a dealer? Thanks

I have a 2004 L3400DT with the 463 loader and BH75 backhoe with 12 and 24 inch buckets. It has only 260hrs on it and is in very good condition. Can anyone give me an idea on what a dealer would give me on trade for it or what I could sell it outright for? I'm thinking about going to something...

I was just plowing snow with my BX1850 with the 2763A blade and while I was going up my drive I hit a chunk of ice with the blade which tripped the blade and stopped the tractor. When this happened I heard a cracking sound and when i looked down I saw little pieces of my engine fan shroud on the...

I was wondering if anyone makes a dolly for the BH75? It seems like where ever I remove it, its in my way. It can be a real pain to reinstall it just to move it. Thanks

I just got a pto generator that will fit on both my tractors, L3400 and a BX1850. Both have enough hp to power my home during an outage. My question is which tractor do you think will use less fuel. At first I was thinking definately the BX, but then I thought about the engine speed. The L3400...

I received a quote on a new bx1850 with bar tires, 48 inch mmm, and a 60 inch hydraulic front blade for 10,900 total delieved to my house. How does this sound? Also I just noticed Kubota offers a canopy for this tractor. Does anyone know what the difference between the regular canopy and the...

In the near future I am going to be looking into purchasing a new BX2350 with 54'MMM, front mounted snow blower and a tiller. Can anyone give me a rough idea what this will cost? Tommorow I am going to call a couple dealers in my area and see what they say. Any help would be appreciated! Thanks Bob

I just purchased a BH75 for my L3400DT and I am in the process of installing it. I am having trouble routing the hydraulic hoses and was wondering if someone could post some pics of how they run. Also the assembly manual talks about a hydraulic connecting plate that mounts above the rear axle...

In the spring I am planning to build a 60x40 pole barn. The future site is about half covered in trees, that I am going to start cutting this weekend. My question is what is the best way to get rid of about 30 stumps? I am thinking of either renting an industrial stump grinder or a large...

I am thinking of putting a snow blower on my L3400DT before winter. Do I have to get a rear mounted one or can I get front mounted? Does anyone have expierence with a blower on a L3400? I assume it has to be easier and faster than the FEL. Thanks Bob

In the near future I am going to be building a 30x40 pole building. The spot where I am going to be putting it is wooded now I am in the process of clearing it out. I plan on putting a gravel floor in, my question is how deep do I need to dig before I put the base down? Also how deep should the...

I recently installed a block heater in my L3400 and today was the first time I got to use it. I left it plugged in for about two hours and when I came back to start it there had been coolant dripping out of the overflow. What would cause this? Could I have possibly put two much coolant back in...

Well almost two weeks ago I pulled the trigger and ordered a L3400 with fel from my local dealer. I thought I was getting a fair deal and they got the tractor shipped to them the next day. My question is, how long should it take to prep a new tractor that is still in the crate? Does anyone else...

Today I recieved a quote on a DK40 with a KL1470 FEL on it with R4 tires. The price he gave me was $20,000. Does this sound like a descent deal? I also got a quote on a CK30 HST with a FEL and R4 tires for $16,800. How does this price sound? Thanks Bob

I am considering purchasing a L3400 4wd with a 463FEL with ag tires. My local dealing quoted me a price of $14,900 for the package. Does this sound like a decent deal? I am also going to quote out a toothbar and box blade. Does anyone know what would be a good price on these? Has everyone had...

I am in the market for a new tractor for doing general work around my place such as brush hogging, hauling fire wood, plowing a small garden, etc. I am either thinking about a B7800 with a FEL or a L3400 with a FEL. What are the major differences between the two? Also what is the going price for...