Search results

I ordered several years worth of all filters, oil, etc and picked it up when i was in town.

Cold snd snowy here in idaho. You have a beautiful place there.

What can i say. Its 5° outside and im bored. Can get my butt in gear to go out and do chores

158°……thats some tough ice

They are used all over texas when i lived there. Lubbock got snow, and they didnt cause a problem. But they are dangerous. Most cattle and horses see the darkness against the light and wont get near them. But i have heard of animals getting caught in them. Ive also been around alot of painted...

Ill order parts from dealer , even if they have to be shipped, over amazon or ebay, because at least i can be reasonably assured their not some Chinese rip off part. i used to get so many fake parts from amazon and flea bay, i lost track. Everything from knock off sun glasses to knock off...

Do what they do all over texas…install cattle grates on the road with side fences to prevent walk arrounds. i worked at a ranch that painted cattle grates on the road, and neither the horses or cattle would walk over them.

If its a private road, put up an automatic gate, and be done with it. if i had a private road i wouldnt want other people using it. In that respect its your right to keep it clean.

Could be a bad oil pressure sensor unit. On any other vehicle i usually pull the sensor and install an oil pressure gauge and compare reading to specs. I have no idea if tym sensors are normally open or normally closed units.

OMG. People have too much time on their hands.i think there are so many important problems in the world…..this isnt one of them.

Yup, they simply steel pictures of motors from other sites, place lowball prices on the items, and ship air. Heck, the shipping is free, yet trucking the engine will cost more than the engine. my wife reciently was looking for an item and found a site that actually used the Walmart logo on...

My tack room is poured concrete 10x20’ floor, plywood lid and walls. All fully insulated with 2 man doors and 1 window. I installed 2 baseboard heaters and keep it about 65° thru winter. I have never had any issues with leather saddles and harness after many years use. I also store pressure...

I only use factory parts, and there always cheaper at the dealer than online. Even a hydraulic top link was cheaper at dealer than online.

I could use a smart outlet…by why bother. I just plug my trucks and tractor into a standard plug in timer. I set the timer for daily start at 6am and it runs for 3 hours. If i use vehicles thats great. If i dont, its a waste but during winter i generally use the units daily.

Have a dji Air2S myself. Love it.

Yup. Steel ash bucket for me, then place bucket outside away from anything flammable. Later dispose of it in compost pile.

Then again, i make my horses dispose of their own waste… 687678,687679

My horses are not house broken…..never will be. They poo wherever they want. This is absolutely the least important thing that concerns me.

i just spent an hour yesterday blowing the mounds the neighbor left cause he didnt open a wide enough area with plow. but you can only push so much. my plow leaves huge round balls all over the place. the blower makes nice path. weve received 24" so far thats sticking, more if you count what had...

my place today. i plowed a figure 8 in arena to run sleighs...when it warms up a bit. 9F sucks right now. its hard to see, but theres nearly 24" of snow accumulated. cleaning up the trails for sleigh and to run dog

i got out and plowed my trails and a figure 8 for sleigh in arena today.

Yup. About a week of single digits

Its 7° here this morning. The neighbor called me last night and asked if i could plow out their place. Apparently he didnt make the paths wide enough plowing his place over past few weeks, and has no wheres else to push snow. Im going over today and blow out berms. So glad i have heated cab.

Ya….no way id go back to open cab. I moved snow today at 16° with a wind.

4 more inches last night….22° today dropping to 9° by 6 pm.

You know, as many of the leds ive installed thru the years of being an electrician, i never actually placed my amprobe on the circuit to verify power usage. Truly i have no idea how much of a drop in power it has. i guess when im bored im going to have to test this.

It was wayyyyyyy tooooo yummy… cant forget dessert….thanks costco tuxedo chocolate mousse

One of my friends that came over on xmas fir dinner gave us 2 fat ribeyes. Cooking 1 up tonight on my pellet smoker. Cant wait. It may be weird but ill also have some leftover mashed taters, carrots and stuffing from xmas dinner.

Holy cow….. in the dead of winter our elect bill could hit $250. Thats due in part to 6 heated water troughs, heated storage/garden shed, heated tack rooms, among other junk. For maybe 8 months out of the year it barely reaches $90. And ill admit we waste electricity. Im slowly swapping over to...

Ive run numbers on solar and wind, cause i hate paying utility companies. Problem is i live in an area served by hydroelectric, and we only pay about $0.065/kwh. So the rates are cheap. But then they add line maint and meter charges. So unless i totally ditch the utility power, i would never...

Too bad. Would have liked to see pics

Nice day to go sleiging

That tractor looks sharp. Good job

went sleighing today. Roads and temps just right.

Measured 24” on ground. received 2” more overnight. Were heading out to hook up the sleigh and go for a ride.

That would be freaky

Upside your head

I had between 12-14” of standing snow out in the arena, where i dont plow or blow snow. Its been snowing constantly for the past 4 hours, and my cleared driveway has 4” of new snow…..they say we should see close to 20” with this storm. Time will tell.

Santas been naughty

.?.?

I have 12-14” standing snow on ground in area i dont plow. Been snowing steadily since last night. Now there predicting 10-20” new snow thru monday. looks like it may be sleigh time soon….. 722261

We now have about 12” of standing snow on ground, plus whats melted off this season. There predicting another 10-20” thru monday here. Well have to see about that, as its been snowing steadily for hours, very fine flakes, and has only added 2” since last night.

Doing full turkey, stuffing, mashed potatoes, orange glazed carrots, salad, garlic parmigiana twist bread. Only having a few friends over.

I just got a fema alert predicting up to 20 inches of snow over next 24 hours, and temps dropping over next 5 to 7 days. Supposed to get down to -10°F, with possible wind chills -25°. well see….these things are hit and miss.

And some of it might even be correct…..:devilish: welcome from Idaho

Isnt an IED an improvised explosive device? 🤣😂😅

I bought this one used about 10 years ago. I have no idea of ago or manufacturer.

Id much rather have our snow than ice. Been there done that.

Got 5 inches more overnight, but now its due to get between 36-39° today. Its already 32. Better go move it now

Its 24° here… due for 6-9” thru evening.

i doubt it does. cant say for sure on yours, but when i checked around to about 6 different companies, none covered ANYTHING once it left the property.

i have commercial coverage offered thru start farm, on mine. its handled thru inland marine as i recall. it has low deductible. i did this because i haul my tractor off of my property occasionally. i couldnt tell you how much it costs, because it is lumped into my total commercial policy. i can...

nope, never heard of them either.

i have NEVER been able to repair a yard hydrant. i have tried everythinjg to unscrew one and replace parts....never had any luck. i usually end up digging it up and replacing entire thing.

have about 9-10 in here standing on ground. have moved snow 3 times so far. still coming down. love it.

received a few more inches of snow today. looks like a white christmas here also.

Today was last of 3 storms passing in last 6 days. But only about 9” total snowfall. Today its 35° and starting to get sloppy. Good news is there predicting snow for next 5 days. Well see.

mine came from china...via costco

Ill never see fiber here…..

Ive been jumping car batteries for 40 years. I guess im glad i didt know its dangerous to do. Not knowing this has saved my vehicles.

Ya, i remember my old radio shack phone and the huge battery. 5 watts…could cook a turkey. unbelievable range. Analog.

How much clearance do you have from the blade to the shop doors…..

I would not get anywheres near this guy…..especially in a lightning storm. that cat is running out of lives.

They had a fema warning posted for our area to expect 10-20” of snow. We got 4” then 40°. Now lots of slop. 724715

Do i regret a cab…….no

I hook up dosing pump systems all the time here only thing allowed for new systems near lake or high water table areas. but i also wire in lots of sewage pumps that send waste to septic tanks. Companies here have done that for many trouble free years. worst thing that happens is pump fails……a...

Heres the link. I really like those couplers. Never seen that kind before.

I placed a roll up door with enclosed opener on my shop 10 years ago. I liked the roll up because i didnt want the tracks to interfere with my ceiling clearance. the opener is built into the door cylinder itself. Unit is called Gliderol

I sent you a private message

well i tried. only way i know to post a video here

just post the video to youtube and add the link here.

None

Its not just them. If you spray any herbicide and it drifts and damages neighbors crops you can be liable. Heck, you can be sued for having red hair nowdays.

All steel prices have risen drastically. Sheet steel is almost 2x what it cost a year ago.

great minds think alike

come on guys...use your eyes.

we received 4" of snow, but just going to let it melt off. there predicting 39-43F later this week.

ive never opened the can of it i bought about 10 years ago. but seeing as im welding up 20 pieces of 8' x 5' wraught iron handrails right now, i think ill try some when i head back to my shop on Wednesday. the guy i making these for handed me some crappy rusted pipe he bought 2 years ago and...

and moving snow wearing my bunny slippers. it was brutal cold today. i spent most of the day in my shop making wrought iron handrails for a friend. sick of welding the junk.

well, to each their own. was 22F high today with wind. no thanks. but i had a life working outdoors all year long. i enjoy indoor time now.

had 4" of snow today....no plans on doing anything with it. will get warmer later this week. high yesterday 22, today 28, wed its supposed to me 39/

its programmable from the dealers menu. comes factory set at 6 seconds.

i just put the chains on the tractor today/... always a fun chore

Ya, but if you have 4 of the exact right tools for the job…..thats hording

I had to use an impact driver on mine

Wet deep clay can be a dozer burial ground

Job security

safer to add pressure regulators to houses. also, less possibility for old plumbing to burst.

no way in the world can you run an electric heater off of an accessory outlet. most that ive seen have max 100 watt output. thats a lightbulb.

i didnt even think that gas water heaters had anodes. i always thought that those were reserved for electric units. after a plumber told me otherwise i went and looked at my 10YO dual gas water heaters. i had to remove an inspection cap but i found the anode rods. i ordered 2 new ones from WH...

i have a dk45 cab with loaded rear tires. my ballast box holds 1,000# of concrete. no issues what so ever.

thats a pretty cool little switch, never seen that one before

if you want you can store that dozer at my place. i can park it in shop even. hate to see it go unused so long:cool:

in calif, even if your convicted of stealing a $75,000 Mercedes, i doubt they get time. they cought a big batch of the kids doing the flash mob thefts of over $400,000 in stuff, they let most of them off with $0 bonds...

I do this for a living…and im still alive. Would not be if i fed a house the way you want to. go here. Generator Interlock Kits | Electrician Interlock Kits | GenInterlock chose an interlock that works with your panel. Run a dedicated generator interlock outlet OUTDOORS and feed it with 4...

Good question. I used to lease one years ago for my business. When work slowed down to a crawl, i stopped doing that. Never had one sit around long enough not being used to know an answer. Everyone i know that has one are always using, and greasing them.

Ive never seen $5 overnight shipping on anything…..usually its like $50 more. But maybe cause i live so far out of town. but yes, only appliance parts houses have those.

The lakes fine, as long as the Californian newcomers dont dredge the bottom to get their huge boats further inshore. they keep suing trying to allow dredging, but keep losing. Thank goodness if they ever succeed and allow dredging, they will bring up all the toxins from the silver mining from...

Tell that to the boys….when its -60f

ive never seen one with opening front glass. mine you have to remove quite a few screws to access burner. im sure its a safety issue. burning means CO production. what if door wasnt fully closed.

doesnt take all day to fill. even Les Schaub tires can remove existing rim guard and refill the new tire during rear tire swaps. they probably meant leave it all day cause they have to find time to get around to it. its put in with a pump

I dropped on into my tank 8 years ago. Its still there. Cant find it. Doesnt hurt anything.

Thanks, i did have shocks replaced. Few years back.

ive gotten to -20 here in the past, no issues. thats cold enough. at -35 im staying indoors. i used to work in northern montana back in the 1980's, where wind chills regularly reached -60F. NEVER again.

funny...i have a broken rear shock that i just found on my 1994 dodge ram diesel. never felt anything. only reason i noticed it is because it finally crimped the wire feeding the shell light and the fuse kept blowing. the bracket on the frame broke. just how important is a rear shock on a truck...

i chip into my kawasaki mule and move it around property. and i also spread it on the trails.

i also dont worry too much about people coming on my property, because ive been here since 1996 and have never had much issues. were pretty secluded. and theres alot of other properties before they ever get to mine. and lots of barking doge.

for me it ios not quicker to burn, as i have to haul all the stuff out to a clearing to burn. then i have to stand by the entire time its burning with a hose. i can chip right in the woods. actually is faster. also here, they close open burning way earlier than they close logging due to fires.

My old concrete 2 piece tank leaked at the joint from day one. System sucked. Years later i had it ripped out and had a plastic tank installed. The plastic tank had 100’s of clamps. Will never leak.

I really likes the woodmaxx unit, and have heard nothing but great reviews about it. But ill see if price drops some next year. This year our fire hazard was so high that the banned working in woods most of the summer anyways. So would not have had much use with it this year anyways. I only used...

No, because i still havnt got the woodmaxx. When i ordered it, they expected 6-8 months delivery and wouldnt take payment until ready to ship. When they were ready price had increased $1,000. So i cancelled order. Ill wait to see if price comes back down as steel prices drop next year…as they...

The woodmaxx web site states the 8800 and 9900 are made entirely in usa, but i bet its globally supplied parts.

I didnt think cabbed tractors even had seat switches. I know my dk45 cab doesnt

I always wanted to place a trash can next to the atm with a placard. Place all deposits here.

i second the check battery cables and battery connections at all points. also check voltages at end of cables while cranking engine. you can also ohm out cables.

i have a NOCO genius charger. they make excellent products. i service generators also, and the only time i have had batteries explode are on the older (pre 2010) era generac units that used a crappy old style brick battery charger. always on at 2.5 amps. these would overcharge the battery and...

boy..sure glad i live in an area where there are no porch pirates. never lost a single package in 25 years. and have a simple plastic box at foot of stairs. living on a 1 way street, 1.5 miles from main road helps.

Yes, but then you cant tilt the plow. Do you have any rear remotes?

I replaced the relay on mine 2 years ago. Its a standard double relay that kioti uses. Its behing the shroud on the sreering column like was said above. Easy to replace.

nice step. i made a similar one out of steel for a friend for his F450 work truck. it slips into the receiver. he doesnt leave it on, as its a shin biter. its hard to see from this pic, i thought i took a pic of it installed...silly me.

Personally i would fill it and lube everything up.

Haha… that reminds me when i was doing a service call at the local mental hospital. My apprentice was in the suspended tile ceiling replacing a lighting transformer. He opened the wrong transformer box and shorted the transformer that ran the magnetic door lock system. All the door locks...

Its nothing new. 10 years ago i went to the JD dealership that i had frequently went to since i had purchased my old jd870. I told them i wanted a cabbed thactor in the 40-50 hp size. The salesman told me its too expensive for me and i should look at open station. I got up and left. Never went...

It takes me about 2-3 minutes to access a gate controller and open a gate…..then again i used to install them. i have a gate on my property, and property is fenced… all 30 acres. But the gate is to keep dog in. You can still access the house without passing said gate. We have nice folk up here...

Every real piece of farm equipment is cabbed with heat, ac,and radio. Some gave a small frige.

?

I was told years ago that running an extension off of the exhaust in the smaller units could effect backpressure into the heads. Not sure if this was a real thjing or not, but it made sense. So i never tried it. these small generators are just plane noisy. But when im out repairing a fence in...

Just the thought of seeing, much less eating, 350 qts of cabbage would make me till up the garden and install concrete…….

If i saw someone put mayo on corn…..id be on the lookout for the men with the white coats with straps 🐸

Gardening is my wifes hobby. I figure that each ear of corn costs me about $15. next year she wants all cedar raised beds. The corn cost just went up to about $32. Each ear.

Sorry, but the thought makes me cringe. Im a butter and salt guy.

Ya, daylight robbery in California is legal. If you try and stop it you could go to jail. not so i. Florida….ha. This low life is going to get so trashed in jail https://nypost.com/2021/11/20/hero-florida-girl-slugs-moms-mugger/

Our county offices, and even the soc sec offices, here in idaho are still open. Ive never had anyone refuse to take cash….except once at sears about 8-10 years ago. They refused to accept anything over &50 due to huge problem with fake $100 going around. Myself…im always glad to take cash. The...

My 94 dodge turbo has been running 10w30 for 27 years and 345,000 miles. I never knew i needed thinner oil.

Oh, i never roll it 100% over than go backwards. That would be foolish. My idea of backdragging is to lay bucket flat, put down pressure on it and drive backwards to flatten ground.

I have a 10 acre undeveloped piece of property where i grow grass for the horses to graze. Its ag property worth maybe 300k . Taxed about $80 per year.

The guarantee is probably that it will arrive some time in the next 7 years.😚😚🤣👺

im still waiting on a 24kw generac generator i ordered March 17th. they have no idea when it will arrive......

ive been back dragging for 28 years o several different machines. never bent anything. but my tractors have never had wimpy cyllinders.

supply line issues make it harder for dealer too. i usually have a stack of oil filters, plugs,air filters for the generators i service. im down to 6 oil filters. ive had 90 new ones on order for 3 months. still have not come in. i ordered 20 group26 batteries 2 months ago. got 5. i did get 150...

Ya, we got about 5 inches over night and thru morning, but its due to warm up to 43 by sunday.

Got 3 inches of wet snow

Is there a fuse out? I have a 2012 4010 and there are a few fuse assemblies on mine

I just looked it up. Your correct. On the larger dk series they used the Perkins engine. Did not know that. Im more familiar withn the smaller dk series.

TYM tractors use the Perkins brand engines, KIOTI uses Daedong engine line. They have been making diesels for some 65 - 70 years as i recall. I have 1400 trouble free hours on my DK45. And thankfully not tier 4. I think a new fuel injector for any line of tractor is a shocker of a price. Heck, i...

I got mine from my kioti dealer. Its the same as they use for backhoes. 719977,719978

They make self sticking silicon heat pads that plug into 120v with thermostats, problem is im not sure where in the tractor this hydraulic oil resides. I use one on my 3point hitch mounted hydraulic reservoir tank for my front mounted snow blower, but it doesnt heat tractors hydraulic oil.

The state of idaho attaches a 3% fee if you register vehicles or pay for permits online. If they can do it so can i

They sell these cub cadet models At home depot. Go to their website and read reviews. There not very good.

No air cooled unit…no matter who makes it, can compair to an industrial unit. I just serviced an older air cooled unit that had 2007 hours on it. Still runs strong. But it took many years to get those hours. Ive seen industrial units that run 24/7. Would take no time to amass those hours on the...

never seen a porch pirate hit out here. too rural, too many nozy neighbors. one time someone texted me to be on the look out for a red car seen pulling into peoples driveways..was the census taker.

i used self regulating heat tape on my patio cover and associated gutters and downspout due to icing issues and leaking a few years ago. stuff is amazing. i can clamp an ampmeter on the circuit and verify that after ice is melted the power use drops to next to nothing.

my brother lives in Fresno, and tells me if he burns wood in his fireplace the neighbors report him..... my brother in law was screamed at by his neighbor because he was smoking a brisket. they threatened to call the cops on him...he lives in calif too. i feel so sorry for the entire state...

agree, except for the part of batteries in colder climate not lasting as long as in hot climates. heat kills a battery . super severe cold probibly doesnt help much either, but the chemical reactions within a battery speed up in hot weather and slow down in sever cold. thats why a battery will...

So sad they let it get in that shape.

Just because it powers up doesnt mean its working. It might have dead amp or ? That prevents output. I doubt both speakers would go bad, and if all wiring has been checked, what else could it be.

No, you can but 1 or 1000

Heat tape works great. I have lots of houses in north idaho using this method. Also, just because you dont get 100% of water out of lines by blowing out water, doesnt mean it will break. Even blowing 50% out would allow room for expansion when water freezes, thus preventing line breakage. Been...

I ordered a replacement cutter head for my norelco razor from amazon. Got a chinese knockoff that pulled the whiskers out of my face. Sent back for refund. Ordered a set from norelco, smooth as butter. If you want a knockoff shop amazon. i priced out a surge suppressor outlet from Amazon...

I always pull old hard drives and destroy them myself. Dont trust anyone with access to that

Hmm. Than it is either a dead radio or bad wire. But you said you looked under roof and all wires were ok. im not sure how to test either, except to try and hook another speaker up to the existing wires. Not sure what tester you need to verify a speaker signal.

You sure there isnt a mute button on radio? My kioti radio has one.

I have 2 caps. One has 1/4” mesh i use during spring thru fall, the winter cap has no screen in it. I got tired of going up and cleaning it with 4 feet of snow on roof. This has worked out great for years. I swap out caps in spring when i go up to clean out chimney. The mesh keeps birds and bats...

Did you have the battery bench tested under 50% load?. I hardly run my tractor at 2000 rpm….usually at 1800 unless im moving dirt. Mine always charges. when it refuses to start, is it completely dead or does it try to rurn over slowly. You could have bad battery cables or bad grounding issues...

Ive lived in n idaho 25+ years. Ive never use any additive in my diesel fuel. Have 2 trucks and 2 tractors over the years. Up here they use winter blend fuels when it gets colder….maybe thats why ive never had any issues. I let my bulk 55 gal diesel tank run down before i stock up for winter...

I had 2 office ups’s go out last month. Well, when power failed they would power computer for about 5 seconds. I priced out new batteries, good ones not amazon chinese wonders, and purchased 2 new sine wave units instead. The old units were over 5 years old, and i just dont want to risk it. Ill...

I put in a UPS at a govt facility last week. It was the exact replacement for a 10 year old system that was smoking batteries. APC Symmetra 16kw x 100 amp system with 3 supplemental battery arrays. Each supplimental unit holds 12 50 pound battries. The main unit holds 4 power supplies and 4...

in 25 years of living in cold north idaho, never oncehave i had diesel gell, never once have i had anything grow in my diesel tank, never once have i had my tractor, or 2 diesel trucks, not start due to cold, never once have i not been able to start my chainsaw,pressure washer or walk behind...

not much of a snow, but i was kinda looking forward to a month of nice weather in the 70's

the ultimate

its snowing today.....that was a quick fall

It doesn't take too many days of hand loading 3 wire alfalfa hay bales on a trailer to see that heading off to college isnt a bad idea.

but i hate to say this...but they make timer switches that dont need a neutral. they run on batteries. they have a 5 year replaceable battery. for those jobs that dont have a neutral. think of all the TV time you missed.

Thats why code was changed a few years ago requiring a neutral to be run to all switches. Neutrals are also required for occupancy sensors.

I lived in lubbock from 1980 to 1982. Back than, all the fields were cotton. Not sure if its still like that, but judging from this video they are. Hope so, here in north idaho, all the grass farmers in the prairie have sold out to developers, and the only thing growing out here are houses. It...

I usually ohm out suspect battery cables, but you could also place a voltage at the end of the run and verify voltage and amperage during a start. I have found lots of issues over the years with rotted battery cabling and bad ground connections…where the ground wire from battery attaches to...

The 5 aps is before the starter relay on some units. Not on the 12 v starter power itself. Ive just seen it lots of times when starters on whole house units start to fail, the draw over this fuse increases and blows the fuse.

battery drill is way different that car. and no one tried to pass regulation that you HAD to have a battery drill.

glad to hear

I had an 870 of the same era. Adding rear remotes involved adding a kit to the tractor, was fairly straight forwards. It did not interfere with the 3 point hitch. problem is, I believe that add on kit was near impossible to find anymore. I remember a few years back someone was trying to find the...

They just placed 2 electric buses into service in Spokane last week

on my tractor, after glow plug timer times out, i can hold the key over to just before start and this will manually cycle glow plugs until i hit the start position. for the times when i need a little more for supper cold days. maybe your does also.

im signing up for it next year,...and so lost. only the govt can screw up something so bad. They make it so hard no one can figure it out.

you can ohm out the cables to see if there damaged within the cable. Have you tried manually jumping starter with a screwdriver to make sure starter turns at all.

no problem. the adapter simply screws in. i have to remove it to do fluid change though.

if the starter is beginning to go bad, that will also blow the fuse.

Did you leave tester on battery while trying to start it to see what voltage does. I know on older generac units the 5 amp glass would blow if either the starter had issues or the battery voltage UNDER LOAD dropped excessively. Also remove battery cables and ohm them out. Also at same time...

maybe i should make some with peanut butter and jelly already:D:D in bread.....

this is the piece i had to add to use hydraulic downforce kit. i got it thru my dealer. its the same kit they add if you add a backhoe...i was told. it just allows hydraulic fluid to dump back into tractor tank. it installs in place of the fluid level dip stick/fill port.

I have a rear hydraulic power pack that’s used on snowblower, so could easily gone with front hydraulic post hole digger, bu t I rarely use unit any more seeing as all my fencing is now done. I went with cheapest option.

Generac generators don’t self correct for daylight savings time, unless their tied to mobile link …. Or genmon system like mine. These do self correct. My genmon does it instantly, but the mobile link may take some time to update. Im Not sure if the free version of mobile link does or not. but...

I’ll get a picture of it tomorrow.

Holy cow….we pay $35 per month for first 25,000 gal, then $0.8for each additional 1,000 gal. worst month could reach $80 if wife goes nuts with watering. But for 8 months out of the year it’s just $35. Per month

Hate to break the news to you….but the turn of the century was 2000. my house that I built in 1996 is a turn of the century house.

Don’t agree at all. You have to keep moisture in oil under control for one thing. You need to keep lube thru machine. Running it once a year is foolish in my opinion…for what thats worth. But I only maintain engines for a living now, and I’ve seen units that haven't run in a year, and there...

honestly, i gotta say, i have never heard of sausage bread.

depends on how much hammering is needed to break up rock. out here alot of people use hammers on their excavators, but not on minis. there usually alot larger machines. were all granite here. hard to fracture. and those hammers pound the **** out of the machine. i know several contractors that...

me like rain....had not seen it for 4 months this summer