Search results

Yeah No Till Drill, sorry.

Thanks guys!!! I knew I could count on you guys!

The tractors I am considering is a Kioti CK3610, DK4510. CK3610 weighs 2646#, FEL with 66"bucket weighs 981#s, 3 ph lift capacity 1631# 24" from pin. DK is not in stock currently. The DK brochure says the Tractor weighs 3373# w/ AG tires, FEL w/ 72" bucket weighs 1,085# totaling 4458#s. The...

The implement is a NTD. Empty it weighs 1000#s. I can put another 3-350# in it of seed.

No, not my 3930, I am looking for a new, smaller lighter tractor that I can still use with my NTD. My NTD weighs 1000# empty.

Thanks, I have a NTD that is 1000# (empty) manufacturer recommends 1500# lift capacity, and I have to use it on some rolling hills and drive up a steep trail to get to one of my fields. I was a little concerned about stability and doing damage to my lift arms due to bouncing.

If you had an implement that manufacturer recommends a lift capacity of 1500# would you buy, and use a tractor that has a maximum lift 24" from pins 1676# or go for a tractor with higher lift capacity?

If you are going to have a gravel driveway, a land leveler is the bomb! I love my 7' land leveler. Makes my rock seem like new and smooth as a regular concrete driveway.

Yes, I know that is my point. It is a lot of tractor. It can do plenty of what I need and then some. I guess my point is would a smaller tractor that can lift 1676#s be ok if I am lifting 1500#s and bouncing up and down trails and hills? My feeling and I am no expert is that doing this is too...

I recently purchased a 50Gal sprayer from RK that fits in the back of my ranger and it worked great a couple of days ago when I sprayed my yard. I will definitely be using it on my food plots this year. My wife can spray glyphosate and I will be behind her planting with my NTD. Easy to clean up...

Well, I am coming to you guys once again for more wisdom!! I have an opportunity to purchase a Kioti NX4510 open cab shuttle shift, with I think 314 or 214 hours. Two months left on the bumper to bumper warranty and 4 years left on the power train for $24,500. They are offering me $14,000 for...

Yes, ballast is a must. I figured as much and the different inch measurements from different points boggles my mind. Thank you for the very important information.

Thank you! I just started looking at the DK models today I was looking at the DK4510. Its just the site I was on didn't list any specs and I didn't have time to check out the KIOTI web page. Yes everything is going up accept for my bank account!! I do plan on listing my tractor maybe on Facebbok...

Ok, here I am again. Still looking at tractors. Now I am thinking about trading in my '99 New Holland 3930 4x4 w FEL, 2 remotes, rear tires 40% front tires new, 1560hrs, no leaks, bad bearing in right front axle. I am wanting to buy another tractor but I need the 3pt to be able to lift 1500#'s...

No I havent. No dealers located anywhere close to me at present.

Have you considered Branson or TYM? A Brasnon 2515 states it can lift 2200# on FEL up to 104" I believe.

Yeah, thanks. I probably should have. I don’t know anything really about the smaller tractors. I use the 80hp on our farm in Kentucky where I NTD fields, Bush hog, spray etc. That might still be my best option for a pile the timber company left here several years ago. I just think it would not...

Thats my point exactly> I have a larger 80hp tractor but it is too big to maneuver through the trees. I dont want roads just a few trails. Thank you.

Thank you.

Thank you!

Thank you! Very good hearing from you. That is pretty much what I am looking to do here.

Thank you. Yeah, the position of the FEL hydraulic lever is bad in the Branson. I would prefer one next to my seat. one thing the Branson offers is weight and heavy lifting. They are not as close as other dealerships either! The other thing Branson has is shuttle shift without moving up into...

I am looking at compacts. Not subs with a belly mower attached. The Branson is a 30hp tractor where they have done something to make it a 25hp. After the warranty expires you can remove the factory crap and get the 30hp if needed. It can lift 2200 pounds on the FEL and 2600+ with the 3pt hitch...

Thank you!

Yeah when I thought of it today, I didn't think it was a very good setup. I would rather just get a 3rd function. Branson only charges $900. I think even forks would work, people really like the grapples though.

Yep, thats what I am looking at. Went to a Branson dealer today in Cookeville.

Thanks for sharing. Impressive resume. Yeah, if I wanted I could just drive up and get my bigger tractor. Would save me $25K. Plus, my wife wants a smaller tractor to help me out. I have watched lots of videos and have read this and other forums and I am convinced a 25hp tractor could get the...

From the responses I have been getting, I figured I would go and snap some pics with my cell today. Plus, its not pouring rain today!

Was looking at this for stumps if I need it. Extreme HD Stump Bucket Tree Scoop | V2

I spoke to a dealer yesterday, and they run hoses from existing remote under chassis to FEL and place a connection there for a fully functional grapple (hydraulic) that you can operate with lever for just $375, grapple is $1200. Thank you.

Thank you!

No, I wont be cutting fields. If anything just small gardens. I am leaning to building boxes and putting up chicken wire to keep the deer out. I dont think I will be hauling whole trees. More likely just picking them up cutting them with a chainsaw and loading them into my ranger to be taken...

I am leaning more towards the Branson or Kioti. Branson because of weight and lifting capability. Just not familiar with them. Seems all tractor motors are from Korea and tractors are assembled in the U.S. Everybody mainly says they are all good just depends on the dealers customer service...

Im afraid a bigger tractor wouldn't be maneuverable enough. Most of the stuff I want to take down is small seedlings. The place has been logged before. I just want to open up the existing logging trails. There are also some downed trees from a tornado last year and lots of debris in an old...

https://www.loaders.com/Brush-Crusher/Brush-Crusher/Universal-Skid-Steer-Brush-Crusher

I like the trespasser idea.

I don't think its 1/2 mile by 1/2 mile.

https://www.loaders.com/Brush-Crusher/Brush-Crusher/Universal-Skid-Steer-Brush-Crusher

Thanks, I don't have a need for hay so spikes would not be used. I mostly have woods and house sits on two acres. No real marketable timber yet because it was harvested a few years back. Just wanting to have access to more of the property.

If the tree was too big I would lift it, saw it and retrieve either with the grapple or load them into the ranger for removal. Thanks.

Thanks, I was looking at the grapple with third function. Recommendations on a backhoe? I don't think I will use it much after removing three stumps in my yard. I could rent an excavator for the $8k price tag. I would hate to have it sitting in my garage. They make a grapple with a quick attach...

Hello, new to the forum. I am looking for a small 25hp tractor. I live on 45 acres mostly wooded. I would like to make small trails to ride my Ranger on, make a food plot or two for wildlife, I have lots of down trees to pick up and cut up, dig out a stump or two and work on creek maybe dig a...