Search results

I'm looking to add snow guards to my metal roof barn. The metal roofing has a Kynar 500 paint and my contractor wants to use the SnoGem polycarbonate ones that adhere to the roofing. He says this protects against rust from metal to metal contact. Thoughts on this?

A friend of mine has a 2006 or so John Deere 990 and has never serviced anything other than the oil and filter. I know its way overdue so trying to help him out. Anyway, i've changed coolant, air filters etc but am now on the fuel items. So after looking at the manual it only mentions a rear...

Sorry for one pic per post but my app will only allow 1 or it locks up

My weight bracket broke off front of my tractor. Now what? Is it repairable?

Well haven't been able to enjoy the new barn much before first major issue. Last month a fitting burst and dumped 358,000 gallons of water into the building. This is because I was traveling away for close to 30 days before noticing the issue. Will have to repair a few things but thankfully...

Hello, For several weeks now I can no longer start new Threads from my TractorByNet app. I can respond to threads but not start new ones. Basically I get a response of "choose a thread prefix" and app locks up so I must close it out. Any ideas how to correct this? Thanks

Wasn't sure where to post this but for several weeks now I'm not able to start a new thread from my IOS app. When I do the app just locks up. Anyone know why this is? Thanks

This is my 1988 Ford 2810 with 452 hours now. Just took it to do food plots in Virginia and I think blew my best friend mind. He has a fairly new 40hp John Deere that runs his MX6 bush hog. Well my tractor only has 32hp but 100 torque and performed better than the higher horse Deere while...

This is my 1988 Ford 2810 with 452 hours now. Just took it to do food plots in Virginia and I think blew my best friend mind. He has a fairly new 40hp John Deere that runs his MX6 bush hog. Well my tractor only has 32hp but 100 torque and performed better than the higher horse Deere while...

So I've posted on here regarding a 20' 14k equipment trailer that I bought new in 2011 that's never been right. From tires that blew out with less than 2000 miles, suspension issues and a strange vibration issue that know one could seem to resolve. Based on this I decided to buy a new 22' PJ...

Looking for ideas on this. Engine cranks very fast but has a slight miss sensation that translates to vibration around 1600 rpms. I replaced injectors but didn't change anything. Does this sound like a pump or timing issue?

Here's where we are now. Finally finishing it up.

This is with Cabots semi transparent stain. Rear side of barn. I'm very happy with it so far. Color is barn red.

I'm getting ready to buy a new bumper pull PJ equipment trailer. I've used 16-18' trailers in the past that handle my 8000lb load very well. Truck pulls good without issues. Then I bought a new 20' Kaufman that has been a nightmare and pulls bad. Jerks truck and way more vibration than the...

Which is best overall? Thanks Sent from my iPhone using TractorByNet

I called him last night as it's been 4 days and he didn't cut it yet. From what I've read needs to occur about 4 hours or just after its setup some. Now he's talking about doing it several days later. What should I do? Is it ok to still do it? Thanks Sent from my iPhone using TractorByNet

Ok was back on Cabots website and finally found colors for their oil based solid stain. Their website is somewhat confusing so still not sure I have correct color list but headed to Lowes now to verify. Anyway if I'm right they have a barn red and couple other reds I like. If the colors are...

Thanks guys for the input. I need to look at these further this weekend. The one thing I've noticed is that alot of these exterior stains don't offer much protection. Even their descriptions don't mentioned it much. I noticed on the Benjamin product needs a clear applied over top of it too...

Just as the title says. I liked the color of the Benjamin Moore "barn red" stain but just realized its only a stain and offers no weather protection. The Behr stain plus weather protection would be great but their red colors are limited. This is going on a 50x70 barn with new rough cut...

My 1988 2810 Sent from my iPhone using TractorByNet

My new baby. 1987 Ford 3910. A 1 owner out of Florida. Original owner recently passed and I was lucky enough to find her. Just changed all fluids and getting ready to stick her in the dirt next week. 😜 Sent from my iPhone using TractorByNet

For some reason I can't start a new thread from my app. Also can't upload but one picture or app locks up. Anyone else having this issue? I deleted my app and reloaded it but no luck????

Update. Now have heat and water.

Well the guy that had this set finally called me back on these. Figured he had already sold them as I hadn't heard from him. Anyway I'm all set now and anxious to get them mounted. Yes I had other options but really had my heart set on the OEM set. Thanks again.

I'll pay a premium price for these if anyone has a set. Need full set of 5 and want the OEM style set. Thanks It's like this set.

So this brown crusty stuff is all over the inside of the cap and lip of the tank. It's my only tractor doing this. Thoughts?

Ok after more thinking and reading I may have a idea. The original plan was to put on the battens this summer after the siding completely dries. So if we do this then put the extra layer of siding on the top portion as I mentioned earlier then the movement of the first layer of boards should...

He said because he couldn't get long enough boards. Front of barn needs a few 14' sections and rear even taller. See rear of barn per attached picture. Garage doors are 10' tall by the way.

This is what I had in mind.

This is where we are now.

Hello all, I'm having a friend of mine rebuild the engine in my 4000SU. As best we can tell she has around 10,000-12000 hours on her and the engine still runs but little hard to start when cold. I've decided to go with dry sleeves vs over boring just to protect from pinholes etc. I plan to...

It's a 40x70 with 12' shed and 12' ceilings. Poured foundation with popular siding. Will have upstairs guest quarters and extra storage. Barn will be heated with gas heat and fully insulated. This forum was a big help in putting all this together. Thank you.

Looking at pine or popular for barn siding. The house was built in 1800's and still has original popular siding so thinking of using it again. Thoughts for good and bad please!

Doesn't have to be wood but I like the look of these. What I'm hoping to do is paint it similar to the red door. Barn is wood but I was planning on metal doors. I could go wood too though. Building is 70x40x12. Garage doors will be (2) 14x10's in front and (1) 10x10 in rear of building...

I have a issue. My contractor screwed up and poured the walls so that two garage doors are on same side of barn when they should be on each end. I guess he can cut out those sections but when he re-pours will it bond correctly to what has already cured?

I'm in process of building a new barn. I'm looking at white pine vs cedar siding. I know cedar is better but limited supply in Ohio I think. Anyone know the cost to have siding shipped in and is it worth it over white pine? Thinking of doing board and batten or just using a vertical 6 or 8"...

I'm staying in Greensboro NC for work this weekend and just did a search on pure gas. Just look at all the stations carrying 100% gas. This is a wave picking up steam fast as people are just tired of dealing with Ethanol problems. Maybe it's related to how it's produced but some of it is...

Thanks Rick. We went by the drawing though so are you saying the part number and drawing are incorrect? The drawing also shows the seal going in after the sending unit. Thanks again for your help.

So I replaced my fuel sending unit and noticed it's now leaking. I take it back out and find a possible issue. The sending unit goes into the tank first then you place a rubber seal over top followed with a metal ring that rotates in to lock all into place. The problem is there are exposed...

Have a friend that inherited his family's 230. I think I'm correct on the year. What would this tractor be worth? It has a little over 400 hours and original paint. Thank you as I'm trying to help him sell it.

What companies are best known for quality? I bought a Kaufman and it's junk so moving on to a quality product but need advice. Looking for a 14K 20' equipment hauler tag along. Thank you

I'm in need to rebuilding injectors for my 4600. If I go new is there any difference from OEM vs aftermarket ones other than being much cheaper in price?

My 1989 Ford 3910 with only little over 700 hours.

Ok I think I have a issue. Let's start from the top. I bought this tractor and seems to run and crank very well. But I first did a coolant flush and got rust colored coolant out. Filled with clean water plus radiator flush ran per directions and got more rust coolant out. Did again and more...

So my 4600 runs smooth except from 1600-1800 rpms. Anything above 1800 is fine also. Any idea what could cause a vibration in this 200 rpm range? Do these engines normally run this way. I know it's a 3 cylinder but the vibration is a little uncomfortable so I end up running below 1600 or...

I'm looking at a used ford 3910. One thing I noticed is that the clutch pedal engages in a pretty high position right before full up. Is this a sign of a lot of clutch wear or is that when it engages quickly coming from bottom up?

Here are a couple pics. In the first one I thought it was the tiny black colored star head just to right of sensor. The sensor is one above white Label with the silver nut around it. But i unscrewed star head what came out looked to be a ticker oily substance vs coolant. Also what is that...

I'm trying to change the coolant in my tractor. I have located the radiator drain but not engine block. Can any one help me locate it please?

I Have a Ford 4600 that to lift a implement you have to go way up with the control before it starts to lift. Maybe 3/4 way or little more. Lifts fine other wise and no hiccups etc. is there a way to adjust it so it starts to move sooner. I have been on several of these old fords and this is...

What is the price difference of say a proven heavy built tractor like a Massey Ferguson 2615 vs a Kubota or Kioti? Would be hard for me to pass on a stout MF with large bore Diesel engine, huge rear end, and very low torque curve. Look at the PTO speed. Full torque and hp comes on very early too.

I Have a 1980 Ford 4600SU and the engine lopes a bit first few minutes after starting when cold. It's a diesel. Engine runs great afterwards and always cranks fast in cold weather. Just replaced fuel filter and both air filters. Thanks

I just purchased a used but very nice BH286 bush hog. I was trying to loosen clutch to reset it and realized its froze up. Anyone ever take one of these apart thats froze up? Just curious as to what to expect. Thanks Sent from my iPhone using TractorByNet

Just picked this up last week. Met the owner at his house. He bought it new about 9 years ago only mowing a 2 acre field behind his house using it like a grass cutter. He owns 5 acres but only little over 2 are grass plus house rest is woods. Had bought a new 50 hp deere to run it too...

Heres a couple others so you know what they look like. All of these are basically general coolants plus have SCA's which is a additive package. These additives do wear out after a year or two. I normally buy the test strips to check the coolant annually. If and when it needs...

As mentioned Fleetguard is a great product. Of their line I would use fleet cool line as its a standard coolant with a additive package. Hard to find where I live so I use Napa Heavy Duty per attached picture. Same basic Ethylene Glycol base with a additive package. If you have a diesel then...

I need a new pump and my 4610 has always had faster and easier steering. Did they use the same pump for both or did they increase flow on the 4610s. Would like to use a better pump if possible. Thoughts? Thanks Sent from my iPhone using TractorByNet

The only picture I had was the one shown here as I have since sold the tractor. What year is yours? Sent from my iPhone using TractorByNet

Im getting ready to buy a new cutter. Im looking at woods brush bull, bush hog squealer or now BH16, and Land Pride RCR or RCF "cant remember" 2072. I know all are good but which offers best parts and service support? Im a little worried about BH as i don't like the new weak tail wheel...

Anyone have one of these tractors? If so please give your review both positive and negatives.

Man i cant wait till spring. I want to work my 461 so bad cant stand it. Lol As soon as the grass grows gonna bush hog like crazy and will work the diff lock to break it in. This is one of my favorite tractors ever and love to hear that Perkins sing. :) This is her when on dealer lot.

Congrats on your new purchase. I'm not surprised at all by your review as you have just purchased one of the best tractors of all time. Yes its a little short on technology as compared to some of the new 4x4's with hydro trannys etc. However, this tractor will do more work faster and easier...

I have a infrared thermometer and want to check my Ford 4600 engine temp. What area or areas do I check to get the best reading. Right now the manifold and just above the manifold on the engines reads about 220-240F.

Ok so our new home is almost finished so its about time to pour the driveway. This in VA so seeing some freezing temps. The contractor says no worries as they use additives to keep things from freezing. So my question is does these additives hurt, make weak, or damage the concrete long term...

This is the back of a ford 4600 operations manual. Can anyone tell by these numbers of the year it was produced?

Guys, I put a new thermostat in my tractor and the temp gauge needle is barely in the green when bush hogging. What do you guys see for your tractors? Does this sound normal?

guys there are 3 thermostat options for my tractor. which one is the standard?

Well I'm a little concerned and need some advice. I have a farm in Ohio and am in process of building a barn on slab foundation. Problem is that it was supposed to be poured in October but never happened. Now its getting very cold and Ive been told cold weather is bad for pouring concrete...

I have 10 or so very old timbers 20 footers or so from around 1890. What is the best way to clean and prep them for using in my new homes man cave? They are hand hewed too. I just had them heat treated to kill bugs inside. Thank you

I plan too for sure. I was fortunate to have dinner with the previous owner and his wife. Got the low down on the tractor and realized it had been within 15 minutes of the original dealership it was sold from back in 1980. The owner was somewhat sad to see her go but had no use for it so...

Another pic. This is a Ford 4600 SU

Sorry second thread but screwed up title in first one. I have a diesel 4600. It idles at 850 -900 rpm's but should be at 600-700. How do I correct this?

I have a 4600 that runs at 850 rpms at idle. In reviewing my manual it should idle at 6-700 rpms. How do I adjust this? Well title was suppose to say 4600 not 4609. LoL!

My family and i have two fairly new equipment trailers from Kaufman. They are ok for price I guess but both jerk and bump the truck alot compared to others I used. Both are rated about 14k gross weight. One is a 16ft and the other is 18ft. So I let a friend use the 16ft and my dad had 18ft...

Rick you are correct but its still a rough guideline or starting point. Pink appears to designate conventional coolant thats pre-charged with the SCA's. There are many charts on the net like the below. Basically we want a conventional coolant with the additives. Once they start depleting...

Anyone know what causes the clutch to be overly easy to push the pedal down? Seems to work ok but very different than my 2810,3910 and 4000 SU.

Guys Im building a board and batten 40/70 building with 9 or 10' garage doors. Problem is i want something that complements the building. Does anyone know a supplier that makes nice doors to go with my building? Thinking 9' x 14 or something close to that. Thanks

Thanks guys. Awesome info. The barn will be located in SE Ohio. I will use these doors too. I think i will go 12ft high to use a 16x10 door on each end of building.

Guys, I have just given my builder a green light to build a 40x70x11 equipment barn. It will have a poured foundation, metal roof, and board and batten siding. I'm sure I will have more questions but for now I wondering how to keep moisture out of the building. This includes keeping the...

Regarding Ford Tractor Coolant (diesel models) Ive been researching different coolants for past few days and thought I would share my findings. As you know there are many types of coolants today. Some are ok for our tractors and some are not. This is due to being incompatible with rubber...

Guys I'm considering buying a "supposedly" low hour Ford 4600. Apparently, it was used in a very small field to mow a couple times a year over the past 25 plus years. For the past 3 years it has just sat in a barn and has not been cranked. I have not looked at it yet in person but will do so...

I was unable to find this on the net last week so thought I would post for everyone. May help me again in the future too. Lol

Here are the paints and color numbers. Ford tractor blue and gray

Well we finally finished her up. It turned out completely beyond my expectations. They guy helping me do the work is fantastic and really takes alot of pride in his work. The PPG Delfleet Essentials is also the best paint used to date as it flows on nice and sticks like crazy glue. Tractor has...

Were getting closer. Sheet metal complete by next week.

Im looking at a low hour Ford 2910 that is in great condition. However it does not go above 1500 RPM. The engine runs perfectly and very smooth just wont run up to rated engine speed of 2000 RPM. Before i buy it does anyone know what might cause this?

Anyone have any specs on this new mower? Just got word this one is in production now and will take the place of the 290 series.

Here is the SU and 3910 chassis after painting

Just enjoying a beer and freshly waxed Ford 2810. Work is done so now time to relax and enjoy. This tractor only has 445 hours a d is all original. Anyone else like Ford tractors this much? My wife thinks I'm crazy.

I know this is a old post of mine but wanted to update it in case someone had same issue. Basically i bought this tractor used with 400 hours and at a very good price as the original owner had it overheat a couple times and didn't find the issue. I think he just got frustrated and wanted a new...

The glass on my Ford 3910 tractor tach is very hazy from being out in the weather. Is there a way to restore the finish?

We have torn down two barns that are 90-100 years old and removed as many hand hewed timbers as possible. A couple of them are 21ft long and as new but most are weathered and have minor rot and or bug holes toward the surface. All but 2 are 8x8 oak post and the 2 are 11x11 oak. How might i...

Im looking for a new 6' cutter. Looking at all name brands like woods, bush hog, brown, land pride, rhino etc. Currently ive had or used BH squealer, BH 286, king cutter and deere mx6. The Deere mows the best but has had the most problems and is the newest. Its a strange design as it has a...

I need a medium duty cutter under 1000lbs. They crazy thing is that all manufactures are turning the medium duties into near heavy duty units. They offer smooth decks but have very high side walls requiring more steel thus increasing the weight. I have a BH 286 which i love but you no longer...

I have a 461 that slowly overheats when bush hogging grass. Takes about 15 minutes to do so. 6ft cutter, radiator is clean and full. New water pump supposedly installed. Any ideas? I hate to take to dealer but no idea how to proceed. Thanks

Our family farm was started around 1850. During this time there were 12-14 barns and 1 house. Most barns deteriorated due to bad roofing. But were talking about stuff that lasted 100 years and some longer. We still have 4 barns left and the house which are all sitting on stacked 36"x36x12"...

Im getting ready to have a barn built this spring. Problem for me is the type of materials. My family has owned our farm in Ohio since around 1850. All the structures have always been wood and i really want the new barn wood as well. BUT i know metal last longer so am i making a huge mistake...

Hello, We have a farm in Noble county Ohio. Im looking at a 40x60 pole barn with either wood or metal siding. Still undecided. Who builds quality buildings and use good materials? Im looking for good paints on metal and quality stuff. Thank you

Ok im going to paint my 3910 ford tractor. Im planning to use Omni AU urethane base clear. What steps should i use to clean and prepare metal? Also what primer should i use. I heard a etching primer is the way to go. Also using all Omni line products. Thank you

So is Urethane paint good? Does it stick well with the right primer? Looking at a PPG Omni. I think i have a good match in both blue and light grey. Also thinking of using a clear too on sheet metal and wheels for extra protection. Thoughts?

Just tried it out and man does it cut deep. Sucker is very heavy and all my Ford 3910 would want. Really built well and leaves a smooth bed of dirt behind her too.

I have a late 80's 3910 tractor with 13.6x28 tires on 12x28 rims. I also have two OEM service manuals (1983 and 1988) that show this tractor having a optional rear tire size of 14.9x28 on 13" rims. So my question is why does no one make this 13" rim? I have called NH and searched the web but...

I checked the power steering oil today and its low. Unfortunately my NH dealer is closed tomorrow. Is there another fluid that is a duplicate at Napa or autozone? The manual says i need M2c-41b or m2c-159-a or -b. Any ideas?

Sorry to hear about all your issues. Unfortunately, Americas continued interest in cheapest equipment possible has caused companies like massey etc to outsource work to 3rd world countries. This is why i purchased used vs new. Even the engines are no longer built by Perkins. There basically...

Guys, I want to really clean up my Ford 2810. However, the tractor has low hours and the paint is like new so i want to maintain its condition as much as possible. This tractor will be stored most of the time and only used once a year. I will be cranking it every month or two but thats about...

Anyone know what is involved in tearing one of these down and replacing all seals?

Guys, My 461 has about 450 hours on the clock and it overheats while brush hogging. The radiator looks clear but the fuel cooler has some grass etc in it from the previous owner. Not sure why you cool the fuel anyway but could that be the issue? Other issue is the stuff is caked in there...

Ive been looking at Morton and Lester buildings online. As i understand it Lester is about 25% less in price and still has alot of the features similar to Morton plus has a good paint warranty for their steel. Has anyone tried them and if so what are your experiences? Also are there any...

Guys, I'm planning to build a new 50x60 pole barn this fall. This is my first so i know very little about them. I am looking at everything from the standard kits to Morton buildings. This will be built to store equipment, deer cleaning station and some upper level storage for smaller items...

Guys how does the 286 cut grass compared to a 72" squealer or Hardee 1072? I like the specs of the hardee alot but the blade tip speed seems slow. I need something under 1000lbs but a decently stout cutter for the occasional rock. My tractors are fords 2810 to 4610's. 32-52 pto hp. What do...

OK so yesterday i serviced my new to me 1989 Ford 2810. Changed oil/filter, coolant, fuel filter/water separator, 2 new air filters, transmission oil, hydraulic oil / filter etc. The engine oil looked ok, fuel filter looked decent but the fuel separator was full of very black fuel with small...

Guys i have found one of these with 500 supposedly (gonna look tomorrow) original hours. This is a 1 owner tractor and husband died so wife selling it. Whats it worth if in good condition like she says? This tractor should look very good and have original tires, everything feel like new and...

I have a 1971 4000 su with high hours that runs rough (vibration) during certain parts of the rpm range. It's done this since I bought it in 04. I have totally rebuilt front end and alot of other stuff but nothing engine related. The tractor starts well even in very cold weather too. So does...

Double post sorry

I need 4 tires for my 3910. What type 14.9x28 do you guys recommend. I will use it for disk harrow and bush hog. Bias tires only please. Thanks

i'm rebuilding a my SU tractor and need to replace both rear drag links or the long portion of the link. Can someone measure their tractors links or provide me with the OE spec? I need the measurement from the end of the threads (close as possible) and to the CENTER of the draglink end where...

OK i have a 1971 Ford 4000SU that turns so tight it contacts the radius rods and is wearing on them. Can someone help me on how to adjust this out. Currently i have the tires just a little wider than stock and i'm running 7.50 x 16's which is one size larger than original. Also the 7.50's x 16's...

I have a 71 Ford 4000 that the governor seems not to work correctly. During load like running into higher grass bush hogging the tractor loses power quickly which is different than my newer ones. Shouldn't the governor pick up a little to handle the increased load? if so what would cause it...

i'm looking to rebuild my Ford 4000 engine and wanted to see if someone can help me understand all that should be looked at, replaced or rebuilt while i have the front of the tractor apart. Currently, i plan to completely rebuild the front end steering bearings, link ends, center main bushing...

Anyone have or had a Ford 2810 and can tell me how well they do with a 6ft bush hog? I have a Ford 4000SU with tons of hours and has lost some power so just curious how a low hour 2810 would do with a bush hog squealer 6ft cutter. Thanks,

Anyone have an idea of what one of these is worth? Tractor has about 950 original hours and looks great. Drives like a new one and front end is very tight. All original and no aftermarket parts. Thanks,

I have a 1971 4000 SU with a gazilion hours on it and the engine is finally starting to loose its power. I'm a good ways over 10,000 hours so figured its time. When i rebuild it should i overbore or should i use sleeves? I've heard both ways for these engines but want to do it the best not...

Anyone know how to fix this? I found two problems on my tractor. One is the differential lock / foot pedal is stuck and will not depress down. The other is the 4x4 light does not work but the tractor does go in and out of 4x4 easily. Could it be just a bad bulb. Any help would be greatly...

Ok so my loader works great except it has no down force. Float position works good but for down force it normally lifts front of tractor with no issues. However, now it won't even try to lift the front end. Anyone have any suggestions? All other movements on the loader work great. Thanks,

Well got to try the tractor out for the first time this week and man its nice. The 201 perkins engine is so smooth and the low end grunt is amazing. I've ran a few of the new compact tractors that must run high rpm for power and there's no comparison. My 461 can actually idle and run in the...

I just had my dealer install this used loader on my MF 461 tractor. The problem is there is no down force on the loader. I think everything else works fine. The loader seems a little slow but maybe the 461 has less flow than my friends Deere 990. Anyway, what could cause there to be no down...

If you have one of these tractors how do you like them? I'm ready to try one out next week and just curious if they've been good tractors and how they operate. Thanks,

hello, i have a massey 461 4x4 and looking to set the tires up a little wider. does the centerline point of the front and back need to be exactly the same?

Hello, I need to adjust the wheel width on my tractor but am looking for recommendations as to how wide I should go for hill work. Now the tractor is set up 56 inches centerline to centerline which is slightly more than how it came from the factory. I will be bush hogging and will sometimes...

Can someone explain advantages and disadvantages of the two? Looking to buy but don't know which way to go. I do small 1 acre wildlife food plots. Thanks,

I found a tractor but want to see what year and date it was produced. Anyone know how to find this? The serial # is 9852EN 15012. Thanks,

Ok i'm new to loaders and have located a 1055 loader for a Massey 461. My question is if this loader came off another 4x4 Massey tractor can the same mount be used or is each mount specific to each tractor. I know the loader is the right one just not sure about the mounting system. Please let...

Hello, Looking to buy one of these tractors (2006 model) and my local dealer just received one of these in awesome condition but no loader. Tires have 70% tread left and the tractor has 400 hours on it. Can someone tell me what its worth so i don't get taken? Its a one owner unit that was...

Anyone know which of these is ok to buy and which is not. I'm looking at the 451 and 461. I'm also looking at the 543 and 561. I've heard to stay away from the 451 as they are made in Brazil. Does this go for the 543 too? I'm assuming so as they are basically the same tractors unless...

Guys i need some help. I have a 1998 3930 with only 217 hours thats in as new condition. I love the tractor but i haul it around some and work in somewhat tighter spaces (in and arounds woods and trees) and was thinking a shorter wheelbase and 4x4 tractor might be the ticket. The 3930 rides...

Well I'm in the market for a new tractor and have always had the older iron with torque motors low rpm tractors. I've even driven newer masseys 563 model and they just pull like crazy. Now i like the Kubota cause they are cheaper and have good reliability. But from the tractors i've drove i...

I have a 1998 NH3930 w/192 engine with turbo and when it gets hot sometimes it must cool down somewhat before it will re-start. Also, when i turned the lights on one time while going down the road it died. I immediatly turned them off and it went right back running. Keep in mind this tractor...

I have a 1998 NH 3930 with 160 hours. The serial number tag under the hood shows a 3.2L turbo engine with 60 gross hp. Can anyone tell me about this engine? i would like to know the PTO hp and were can i find further information. There seems to be very little info on these engines and even...