Search results

Using a DA cylinder should work, the plow may be slower in one direction and faster in the other-but still functional. The valve we sell is on this page, near the bottom: Ken's Bolt on Grab Hooks <<Hydraulics>> Here is a pic:

I agree 100%, been using mine for 10+ years now!

Shameless plug here, but I sell one also: Ken's Bolt on Grab Hooks <<Hydraulics>>

The Dixon H2F2 is an IS7241 "B" type, you can tell by the long snout/tip, I sell them in the 3/8" size, yours appear to be 1/4" size based on a Google Search: The size hose is irrelevant to this discussion, you only really need 1/4" as I described above. The one on the right really looks like...

I've been using Larry Mower Axles for 10+ years now:

As already stated, Hook to Chain always with "grab" style hooks, with slip hooks you can get away with Hook to Hook. Also, you might want to check out the new style "Twist-Lock" grab hooks we sell, guaranteed not to come apart! Ken's Bolt on Grab Hooks <<Accessories>>

Do they look like this?

I too wanted fenders in the front, I guess I'm a fast mower as well :laughing: but I never could find anything so I went a different route, mud flaps. Found these at TSC: Trimmed them a little, and made some aluminum holders for them: So I ended up with this: Then I mounted them with...

Its another tractor forum like TBN, only its dedicated to John Deere machines. I can't link to it, but Google will find it easily. I was at work earlier so I couldn't post the list, here you go:

Here is how JD terminates their 3rd function hardlines (misc pic found on TBN, not mine):

Yes, it should stay forwards in the float mode. Start with the linkages and make sure everything is well lubricated and free from excesses slop. I guess is that its not going completely into float and that's whey it popping out.

The kit is #BW14715 but they seem to be NLA anymore. Remember this series machine is over 10 years old so these kits are getting harder to find.

Get a gauge setup, and test your pressure-that way you'll know what's going on. Tee'ing in a gauge is not needed, you can simply plug one into a loader port to test the pressure: Here is the simple one we sell, although I'm not sure we have the proper QD to fit your machine in stock. You may...

That kit sells for about $300. All it does is "extend" the mid-SCV ports to the rear via some hoses and hardware.

No plans for toothbars, with offerings like the Piranha from BXpanded and the regular style from WR Long there is not much I could improve on, those are fantastic products. I think we will stay focused on hooks and other attachments for the buckets, chain accessories like the new Twist-Lock...

Sure, a set of log tongs will hang nicely from the center hook. Heres a picture I stole from member "beenthere" in an older thread"

I don't have a drive over deck, and I'm not sure why that matters but I use Larry's Mower Axles to store my deck vertically: The Stow-N-Go thing did not last long, rumor is the lawyers thought it was unsafe so they got rid of it.

Very COOL! Congrats! As RG1 wrote, its a DI engine so no glow plugs, but there is a intake/grid heater (#14) that's active when the key is in the start position I think. AIR CLEANER Cart key PART NO. PART NAME QTY SERIAL NO. REMARKS 1 M808310 Adapter 1 2 M807334 Indicator 1...

Yes, those Twist Lock hooks are very nice-we just started carrying them also. We are the first to have the new Twist lock SLIP Hook in stock, these fit 5/16" or 3/8" chain. Ken's Bolt on Grab Hooks <<Accessories>>

Here's a simple Chart indicating WLL's of various chains: Here's a good article on what "WLL" is: http://baprod.com/images/stories/wll_article.pdf And a good one on why chain breaks: http://baprod.com/images/stories/chain_article.pdf I also agree with most that 5/16" G70 chain is perfect...

As promised: Here is the pedal assembly, #18 are the return springs that often break: BRAKE SHAFT, PEDALS AND LINKAGE (HYDRO) Cart key PART NO. PART NAME QTY SERIAL NO. REMARKS 1 M132102 Nut 1 2 H86608 Washer 1 3 LVU10491 Pedal 1 - XXXXXX MASTER BRAKE, (SUB FOR...

I assumed when you posted the 1/2"-20 you had verified that? You will have to measure at least the OD to be sure. Another way is to go to a local hydraulic shop and buy some cheap and simple caps and plugs in various sizes to do some testing. Stay away from the dealers...find a good local...

Kubota: JD:

They are usually mounted on the frame (or subframe) and have the four lines running through it. If one side see's an overpressure situation like hitting a curb then the pressure is "relieved" or "crossed over" to the other side letting the plow turn. Here is a picture on my JD #380 plow:

Nice! On my MM212, since I rarely use the spoolgun I just added a quick connect and a short pigtail of wire so I could remove it easily and not have it in the way when not needed.

So JT, what is your serial number? This diagram is for 210001 - 310000, that should be the ones that have the RIO (including the 1025r's) as they first ones did not have it. Here is the proper front PTO kit that had the sensor I mentioned (I mis-spoke when I said it was the hitch, sorry)...

Here: Lift Cylinder, 148 Loader (044101 - ) Cart key PART NO. PART NAME QTY SERIAL NO. 148 158 168 REMARKS 1 JD7799 Lubrication Fitting 1 X 90° 2 RE26493 Rod 1 X (SUB AH137177 AND AH141141) 3 R90265 Snap Ring 1 X 4 RE24534 Seal 1 X (ALSO ORD...

]Oscer, you have the "plate", and it is very close to same if not even identical to the setup on Jim's 2520. Sorry but I don't have time right now to stare and compare in JDP. Here is the setup on mine, I though this picture was included in the post I made years ago:

Adjusting bolt #2 should adjust the tension.

Here is the breakdown of the cylinders: HYDRAULIC CYLINDER (650 AND 750 TRACTORS) Cart KEY PART NO. PART NAME QTY SERIAL NO. OR YEAR REMARKS 1 JD7826 FITTING 2 2 PT5249 HYDRAULIC CYLINDER BARREL 2 BOOM PT5251 HYDRAULIC CYLINDER BARREL 2 BUCKET 3 14H863 NUT 1...

If it's diesel fuel, and it probably is based on what YelBike wrote (that the hydro pump is not attached to the engine), then the most likely source is the injection pump. Not really a DIY repair IMHO. FUEL INJECTION PUMP Cart key PART NO. PART NAME QTY SERIAL NO. REMARKS 1 M87825...

This is from JDP, not sure its going to help: Brake Switch Cart key PART NO. PART NAME QTY SERIAL NO. REMARKS 1A 19M8072 Cap Screw 2 - 310999 M3 X 25 1B R67654 Cap Screw 2 311000 - XXXXXX 4.826 X 12.700 mm 1C 19H3370 Cap Screw 2 XXXXXX - 0.190" X 5/8" 2A 24M7029...

Welcome, This is the best pic I could find quickly, but you should already have pins and keepers, not bolts. Is this a used machine?

New month, new adds:

New month, new adds:

I think this is the correct diagram: RADIATOR, HOSES AND FAN SHROUD (SN -H450000,-E470000,-P460000,-F475000) Cart key PART NO. PART NAME QTY SERIAL NO. REMARKS 1 TY22559 Bulk Hose 1 COOLANT OVERFLOW 2 R56101 Clip 3 3 R109301 Cap 1 4 LVA13969 Reservoir 1 COOLANT...

Here is a picture, and this is when it's behaving and staying at the bottom of the screen.

The PTO is electrically operated, and since you mentioned squirrels chewing wires you need to check the wiring to the solenoid:

Welcome 11, It is standard on the 110TLB, making sure all the linkages are well lubricated is the first place to start, and checking for worn parts on the joystick assembly.

Example from CL today: John deere tractor weights - $75 (Cecil county) I have two 40lb tractor weights that I don't have any use for Their in great shape! Text or email 443 *** **** Location: Cecil county MD it's NOT ok to contact this poster with services or other commercial interests

Just started on my iPad this morning. Wasn't there last night. Using Safari. There is no app running that will cause that.

Welcome to TBN! The .pdf from JDParts is to big to attach, but if you register at www.jdparts.com for free you can get it yourself, there is a quick tutorial linked in my signature that can help if needed. Just put 90 in the search box. Here is a screenshot of the parts breakdown ( I think...

From JDP, Fluid Film works great for the linkages, do the joystick as well:

Here is what I thought of when I read the title:

Have you ever lubricated the linkages and heim joints or cables if you have a cab model? Fluid Film is great for this. Here is the older OS linkage from JDP:

You can Jeff, just register (for free) at www.jdparts.com and you get access to the same basic system the guys at the parts counter uses. There is a quick tutorial linked in my sig to help as well. As for the other kits, I will agree that the 3rd function kit for the loader can be handy for...

Welcome to TBN, You correct, there is a 3rd valve on the SCV (loader valve). JD sells a kit that includes the lever, hardline, and brackets to make this "3rd SCV" work. Here is one for sale: John Deere 3RD SCV KIT LVB25084

This is what your dealing with:

Yes, the lines go to the rear couplers for the 3rd SCV. Here is what you get in the JD kit: HYDRAULIC HOSES AND OIL TUBES - THIRD FUNCTION (300CX) Cart key PART NO. PART NAME QTY SERIAL NO. 300 300X 300CX REMARKS 1 M42702 Snap Ring 2...

Here is a quick diagram I found, just look at the right side marked lift cylinders to see how to connect them.

Die grinder with a cutoff wheel, AKA wizzer wheel.

As far as I know, the 2320 is not being renamed, rebadged, or eliminated...right now. Here is a snapshot from the JD Build Your Own page I took just now after trying to build a 2520: It looked like I could build the 2520 or 2720 at first, but then this page came up. Things appear to be very...

The chart I have does not agree with that statement:

Here is one of mine: Miller 210, Lincoln L56 .035" wire, 75/25 gas. Don't forget to tip the hook slightly away from the first side you tack-the heat will pull it straight, then weld the opposite side.

The detents are attached to the rear of the valve, opposite the linkage: SELECTIVE CONTROL VALVES (FLOAT AND REGENERATIVE) (55 SERIES ONLY) SELECTIVE CONTROL VALVES (FLOAT AND REGENERATIVE) (55 SERIES ONLY) (CONTINUED) Cart KEY PART NO. PART NAME QTY SERIAL NO. REMARKS 1 M800705 BOLT...

I think its more about control then money:

From JD parts my friend (for the 200cx loader), do yourself a favor and learn how to use it ;) There is a link in my signature to help if you need it. That sucks that your dealer had no clue as well. BUCKET LEVEL INDICATOR Cart key PART NO. PART NAME QTY SERIAL NO. 200X 200CX REMARKS...

Miller 210, .035" Lincoln L56 wire, 75/25 gas: After spatter removal, media-blasting, primer and JD Green paint:

Welcome to TBN. There is no way the 2360 sells for that with a MMM and FEL., something is wrong with that quote. Here is a snippet form the build-your-own on the Kubota website:

Yes you can, just run long hoses to the rear. BUT: Why not get the 3rd SCV kit? You already have the valve, the kit includes the WD's, hardlines, lever, brackets and hardware to control it. This is for the older non-CAB model (you need to know your serial number to order): Third Scv Kit ( -...

That's gonna be a tough find, I assume you cant weld/fabricate? Its a super heavy duty blade setup, I adapted one to me 4110 a few years ago, here are some pictures: https://picasaweb.google.com/113966569709555812037/PlowPics User JD755 may have some info as well if you want to PM him. Here...

From JD parts, it's #23 you need Part # PT13744 Plug: A search of that part number will turn up some other threads as well.

Most logging tongs already have a large ring on them, just hang them from the hook on the QH. Like these: http://www.gemplers.com/product/WEB180230/Skidding-Tongs-Ring The KISS principle.

I dont think you need to Tee it in and mount it permanently, get a short (24") hose, a coupler and a QD nipple and just test it occasionally. Here is mine: And a short video I made:

Here are all the parts involved, you will have to check with your dealer for prices: MOUNTING FRAMES (4100, 4110 TRACTORS) Cart key PART NO. PART NAME QTY SERIAL NO. 200X 200CX REMARKS 1 AW34065 Frame 1 X X (SUB FOR AW33483) L.H. 2 W51622 Self-Locking Screw 6 X X...

Welcome to TBN It is not uncommon for the brake shafts to seize where they enter the rear hubs, there are also springs (#18) that help return them that are known for breaking.

Part #10 is the screen:

Tighten #8:

We had about 10" of snow last night in a very fast moving storm, woke up this morning to see this on my pole barn. Last year a big sheet of ice slid off and bent up my gutter. What are those things called the keep this from happening? Where do I get them and how do they attach?

I have been building a blast cabinet, or "sandblast" cabinet even though "sand" is rarely if ever used anymore. There is A LOT of pictures-sorry to bore you all:laughing: All that is left is to get a short 8" air hose made, and install the latches on the funnel door-I am waiting on them...

So, A guy (named Joe) from this forum asked me to build a custom plow setup for his new 2320. As some of you know the 54" plow that JD offers for the 2x20 series machines is a joke on many levels...So Joe bought a well used Meyer 78" plow of CL, and wanted it put on his tractor before...

I am going to build a blast cabinet, I plan on getting the "kit" from TP Tools. I cannot decide which to get, the trigger or footpedal operated one, looking for advice please.

Been wanting a spool gun for my MM210 for a while to try some basic aluminum welding but they are super expensive! Had a search on evilbay for a while and finally scored this used Miller 3035 gun for over $200 lees than a new one:

The replied to message indicator, you know the little "check mark" that shows you have posted in that thread, does not work with older threads-I guess those started before the last major upgrade, I understand that...but why doesn't it work if I make a recent reply to the older thread? Example...

Welcome to TBN:D I have it's slightly newer brother, the 4110. It is a fine tractor and built well. A little more info about yourself and what you need a tractor for will get you better information.

Is this new tagging "feature" automatic? THIS post is tagged "Winches" when it's really about paying off his tractor:confused::confused2: There are a few others that are oddly tagged also... I personally do not like it, I use the "since my last visit" religiously and it just clutters up the...

So tonight I was reconfiguring my air lines in the basement to add a valve for the new line that will go out to the pole barn, got it all together and heard a leak...so I soaped up all the joints expecting to find one that I did not tighten enough. Well, to my surprise, it was actually the Tee...

I am looking for experience with cable type chains, preferably with R4 tires. I already have 2-link style chains but have never used them for fear of damaging the asphalt driveway and/or the concrete floor in the garage. I have been looking at this style from Vulcan Tire or THIS style. Price...

Warning: Proud Papa gloating post to follow. So my daughter is 14 and has driven the tractor plenty...and even my car and truck a few times. But she has never used the FEL on the tractor before today. She was outside with me while I was clearing the snow and was bored, so I thought it was the...

I have two upcoming projects that will require a lot of custom length hoses, so I though it would be a good time to give these a fair trial. I have always had hoses made locally at a fair price and in a timely manner, but I was always curious about these. All parts (hoses and Fittings) where...

Two weeks ago I drove to New Jersey to pick up this used Trac-Vac 854. I have A LOT of trees around me, and doing leaf cleanup is always a chore I hate...So I have been looking for years for a solution-and this turned up on Craigslist so I jumped on it. I have about 4 hours on it now including...

HOLY CRAP! I hit the "Since my last visit" button and the whole first page was adds from "Marshall" Is this the new better way?:mad:

And other great old tractor shots from the National Apple Harvest Festival Yesterday.The last three in the album are video's Web Album

A few weeks ago I received a new Lighted TiltMeter Model #25L to try out courtesy of Rick at R&B Manufacturing, the makers of the original TiltMeter. Fist first impression of it when I opened the box was very positive. It is very well built and looks like it will last forever. The bubble...

Another oldy but goody for '03 got dredged up today...got me thinking:eek: I had made this suggestion in anther thread but it did not get any comments, so I thought I would bring it up in it's own thread: What I think would solve the problem...would be an alert that would warn the poster...

My 15 year old POS jack is leaking...I want a NEW GOOD 3 ton minimum capacity jack. Suggestion? Brands?

I have been looking for a golf cart for about a year to play with...So last week this came up on CraigsList, it was close to home so I went to look and bought it today. Details: Made in early 2001 10 HP Kawasaki engine CVT Transmission Electric dump bed Only 65.3 hours! Recent service...

For sale by a friend...Please PM me if interested.

I spoke with Melissa yesterday to order my LD-48 Grapple and we talked about the JD QA setup they are offering-She is still learning the tractor side of the business since they primary bread&butter is SSL attachments. So I thought I would let all the JD owners know that their QA setup will fit...

Just watched the John Deere show...Was primarily focused on the new 3E series "value" or "economy" tractors that where unveiled for the first time today. Things that stood out for me: 1. Yanmar 3cyl engines 2. Made (assembled) in Georgia 3. Loader is FACTORY installed, and is NO a...

Anyone have a PC based (USB preferably) OBD2 scanner they like? I have a simple code reader, but I am looking for something more advanced to help keep my aging fleet on the road. I would like one that reads the senor values in particular... I am fighting a P0106 MAP sensor problem in my Buick...

I saw this on the side of the road last week, asking price was $1,500-when I really looked at it I discovered it was like new-literally. The guy said it was a few years old, only used once maybe, and garage kept. So I do my homework, discovered it's an older model, but sold for about $3,500 or...

Is the server slow the last couple days? There sure seems to be a lot of double post's in various forums.

I finally got a chance to install my Joystick handle I bought last year, and while I was at it and had an extra button I installed a horn. The Handle is from John Deere, they use it on the 110 TLB's (cost $170.00) and the horn is from AutoZone (cost $14.00). The hole in the end of the joystick...

Does this feature time out? I see older post's that I have replied to that do not show the check mark... Like THIS one from a month ago does not show that I had replied to it:confused: Edit: And even now it still does not show up, even though I replied to it again a few minutes ago. But this...

There seems to be allot of strange garbled characters showing up in post's the last couple days... Any reason:confused:

Need some help from the sprayer pro's: I am building a 3PH 30 gallon sprayer from a pallet of parts I got at TSC for $100.00... Can you please tell me if the way I have the roller pump secured is OK, or does it really need to be "supported" like the directions say. The chain is loose enough...

My driveway was put in three years ago when I built my house, They put down a "base" layer that has very course stones because it was cheaper and we where still building-didn't want the finish layer messed up by trucks or equipment, And we wanted take make sure it settled wherever it was going...

I also think the 2 or 3 spool valve is the way to go... As far as hoses, they can be managed like MAD said, it's all in the planning. Here are two pictures of my 2 spool valve: Here is a link to the whole thread:http://www.tractorbynet.com//forums/showthread.php?t=69599 You could add just a...

Just wanted to make #1000:D

It makes absolutely no difference, just look in your manual to figure out which one gets pressure when the joystick is moved...let's say "UP" I bought a 3" liquid filled gauge and a 12" hose from the SurplusCenter, then a QD nipple from JD to make up my gauge.

Not meant to start any wars, just thought is was interesting... Playing Video

How do you include a link like this: Surplus Center Item Detail That would just show up as {DIVERTER} in the post? And why does the software change the title of the link when you copy and paste it? The link I copied above looked like this before I posted...

If you have a 110 TLB, can you please tell me how many functions (switches) are on the joystick handle? Can you please also measure the diameter of the steel rod that it mounts to? I want to add a handle onto my joystick to control the diverter I added to the FEL, and also maybe a horn... I...

Since the upgrade, one issue is still plaguing me, and I thought it was being worked on... After clicking on a attachment in a post, then clicking the "BACK" button to return to the post, the forum ALWAYS takes me to the top of the page, then I have to scroll down to find where I left off...

I added 2 rear remotes on my John Deere 4110 CUT, I used the Power Beyond kit from JD to access the hydraulics for the new valve. The valve I used is a Danfoss valve purchased from the SurplusCenter The first pic shows the mount I made and welded to ROPS x-bar. Rear View

I recently added 4 lights and a strobe to my ROPS, and I thought I would share them with everybody. The lights are 50 watt HOBBS Trapezoids purchased from Messicks The Strobe was a "extra" one from work... I also added a rear 12v outlet while I was in the wiring mood. Yes, I drilled the ROPS...

Is this annoying anybody else? It bugs the he** out of me!

This has been brought up in the past, but with all the recent inquires about the new models, I thought it should be posted again... Stonehams is a great site to find info about tractors, attachments and other stuff from JD. If you click on the "View Printable Specs...." links, they often...

Here is some pics of my latest project, a 3PH dethatcher. A special thanks to MadRefferee for the plans and ideas, but of course I modified them! Specs: 6' wide... About 70lbs or so... 18 duel rake teeth (38 tines) part# JD-2, from TSC, $1.82 each... Approx. 2" tine spacing... Built to mate to...

I have been wanting to add rear remotes to my tractor for a long time, with the intent of getting/making a dumping trailer, and a hydraulic top link. The problem has been finding a valve that is small enough to fit on a SCUT. Today the new Surplus Center catalog show up in the mail, and there is...

With all the talk lately of trailer's, it got me thinking that I really needed to ugrade my trailer, so I put a for sale sign on the old one it sold in 2 days. I replaced it with a BigTex 16',10k Model 10PI tandem axle trailer. The BigTex brand is a little pricey, but the quality is great...

Anybody install their own 410 loader on a 4110 tractor? I am in need of the install manual, I have the users manual. Thanks...

Last year I made a forkilift attachment for my FEL. I do not have any pics of the build process, But here are some pics of the completed project that I have had a few requests to post. First pic, Front view

Thought I would post a follow-up of my snowplow project. The origanal post can be seen HERE . Everything works as expected, no troubles at all. Here is a pic in the latest snow we had, only about 2". Last week we had 7" and it worked great for that also.

I am trying to take the cylinders of my JD 410 loader apart, I have the snap ring off but cannot see what holds the rod giude in... Attached is the parts breakdown Any Thoughts???

I was talking to the service manager at my local JD dealer today, I commented about how good JDPARTS.COM was... He said FOR NOW! What do you mean I asked? He said that HP manages the site now, but that is changing soon and he has heard that it will less user friendly . Not sure if the content...

I just finished building a snowplow for the FEL of my JD4110 (post is in the build it yourself forum) I would like to disable the regen feature of the DSCV, If I push the stick to far to the right the plow stops moving... I remember somone saying there was a lockout, but I cannot find it in...

The following are pics of the Snowplow that I am building. It is a follow-up project the the remote I added to the FEL in this THREAD I started with a Meyer's 6.5' Poly Plow that I bought used from a member on this board (Thanks Scaper). The A-Frame was shortened as much as posibble to get...

I started gathering parts and info for this project last year, today I finally got it installed. Here is the Electric Diverter Valve from the Surplus Center all painted and ready to mount. PS. this is my first post with pictures so bear with me!

I am Biulding a small wagon and need the latches for the siderails, TSC does not seem to have them, Anybody have any sources? Thanks...

For those of you who park in a garage with a GDO, Check this out.... BIGDO I came across this in a recent motorcycle magazine. ChromeWorld has them for $69.00 Kind of expensive but pretty cool!

Anybody in the central MD area have a 60" to 84" landscape rake that I could borrow/rent for a while? I am building a new house and need to get my yard in shape for seeding, I would hate to have to buy one for this one time use. Doesn't hurt to ask...

Anybody know the real difference's between this multiplier unit avialable from V&M or this one from the SurplusCenter Anybody with experience with either please respond... Thanks

Anybody have the Power Beyond Rear Auxiliary kit (part # BM19290) on thier 4110? I need a remote and I am trying to figure out the best wat to add one.

I would like to test the Hyd. pressure on my tractor. I just bought a gauge that reads up to 3000psi, a 12" hose and have ordered the proper quick coupler nipple that fits my SCV. Can I just plug it in one of the loader QD's and move the lever to get a accurate reading? Will that tell me the...

Just got a great deal on a Meyer's 6.5' snow plow(Thanks SCAPER) I am staring the design for attaching to my FEL, Here is the issue... I plan on getting the VM Hyrdaulic splitter so I can control the angle of the blade(and maybe for a hydraulic top link). The Meyer's plow uses single acting...

I want to build a Curtis type blade setup for my tractor, I am curremtly looking for a 5' or 6' blade. Here is my dumb question... Since I have no hydraulic remotes, can I just level the blade with the loader control, then disconnect the hoses from the DSCV that go to the dump cylinders and...

In the link below are some pics of the forklift I made, The files were to big to attach, so I will try to get some smaller ones soon. Its getting to cold here to paint them so that will be a springtime project. Thanks for taking the time to look.

I have had my 4110 for 2 months now, It has 29 hrs on the clock so far. I got my new toothbar bar the other day and just wanted to say WOW, I dug up some really stubborn roots that would not come out with the toothbar. I am just rambling... I updated my sig with some pics...