Search results

When I clicked the picture, it took a long time to display, so I checked the size, it is very big at 4032x3024 pixels, size is 6.72 MB:

Never have seen anything like that on my computer, so went to that post. It downloaded normally and showed the attachments:

Mine has always been right. You can correct the Time zone in your settings:

And another verbiage change, Posts are now Messages:

Yep, fer shore.

At least you know how to edit. So many don't know how or just don't even try.

I thought it was from a laser gunsight!:eek:

What is your definition of extreme? I would be surprised if their shipping to Washington State is over $200 dollars. Call and ask, then get on the waiting list.

Just noticed this morning that the time of posting is now gone after a week. The day and time shows for a week, then it shows the date without the time. I guess it doesn't matter, it is just another change for my old worn out brain to deal with. :(

Click "Find Threads" at the top of the page, then click "Threads with your posts":

This time I walked out of the Tag Office with the sticker in hand, straight to the truck and stuck the sticker on the tag . No chance of forgetting this time .

Can you see this one? https://www.tractorbynet.com/forums/threads/another-thread-closed.429682/post-5946043

Well I don't miss it as much now that I am used to looking at it in the URL Bar:

It is still in Community Forums: https://www.tractorbynet.com/forums/the-front-porch/

No but you can back the trailer while going forward: Or you can pull the trailer and drive forward:

The logging winch goes on the front: forestry winch for skid steer at DuckDuckGo Yep, mine will lift over 6000 lbs. I don't understand that statement. My V417 has 2 wheel front steering just like a tractor. Flip the switch to 4 wheel steering and the rear steers opposite of the front, the...

Yep, I think you mean Lipizzaner: lipizzaner horse information at DuckDuckGo

I felt the same - here is the reason from LS Tractor Owner in post # 26:

Yes, that is correct. No, you got it right and you can prove it when nothing is hooked onto the 3 point, you can reach down, grab the lift arm and raise it up.

Found some pictures of moving a tree by the root ball:

Ground clearance has never stopped it. The bottom is steel and smooth. Driving over a big log, it slides with the front wheels in the air until the rears spin. Then extend the boom, it will teeter totter on the log, the back wheels will go up, the front wheels will come down and pull it off the...

Since the compact telehandlers are smaller and have four wheel steering, they will go in the dense woods where a tractor can't go. And put this on the front: skid steer forestry winch - Image Search And this on the rear:

Since you are using a mouse, have you discovered the middle-click to scroll function? On mine with the pointer in a clear area near the center edge of the page, pushing down on the scroll wheel activates it. Move the mouse to start scrolling. Hit the Left mouse button, Esc or Ctrl to stop...

Yep, the post about the post makes me feel better about the machine. (y) That may be the easiest fix that you will ever do!

It is already there, click your avatar at the top: I don't know what 'include' is or does?

I did that many years ago, cut the deck and the right front wheel off of a big wheel push mower. Used it on brush. Worked good.

Yep, I don't understand why it is needed. All of the many tractors I have owned over the last 50 years didn't need it.

I like the new version (y). The font did not change on my computer with W10 and Chrome. I use My Home and New posts to keep up with what is going on here on TBN.

This was my 100 gallon saddle tank on a skid:

I vote to keep the new Smilies. The "Recently used" section, means you don't have to scroll down looking for them next time you want to post it. (y) Just noticed the search box, I will have to try it:

My wife and I got our second Pfizer shot yesterday morning. Both of us had slight muscle soreness by late afternoon. This morning, no pain for me and very slight pain for her. (y)

We had good results with Crushed Asphalt, not millings, crushed.

New posts and My Home now shows the complete Thread Title and the Forum:

I use the LockNLube coupler on a four foot long hose. That leaves both hands to operate the 10k rated lever gun:

Does it move normally when operating it? Is it completely stopped and idling before you let off the brake? Shift to neutral, let off the brake pedal, do the RPMs increase?? I rarely step on the brake pedal when driving, because letting off the accelerator applies the brakes at idle. There is...

Some new info: Attachment manager (reuse attachments)

Search for a tractor junk (recycle) yard in your area. Might find one you could adapt.

Rated 3,000 PSI higher.

I got it also, reported here: New Problem on New Version It is happening a lot, seeing several double and triple posts (n) Edit: Happened to me when posting this reply. (n)

I typed the reply, clicked the blue Post Reply button and got this: Clicked the X and clicked the blue Post Reply button, got the same error. Reloaded the Tab, the Reply was posted twice. I deleted the second one. On computer, W10, Chrome and WI-FI Hotspot to cell tower. Now that I think...

I used copy from one of my threads and paste in another one of my threads in the old version and the pictures showed up just fine. Then months later they disappeared. So now I use the uploader.

Ok, gooder-un (y). I remember seeing that picture in The Strange things your pets do... thread.

I had my settings set to show PMs in "My Home" along with new posts. And send an email notification.

Click your avatar on the upper right. Click "Your account". Click "Attachments" That opens the Attachment Browser: Then look for the old photo. (y)

oosik, I like the new avatar (y)

This is a cool feature that shows the number of new posts in "My Home". It even puts a red dot on the TBN icon in my bookmarks. Click the Bell to show the posts. (y)

I vote no on locking old threads, they still have good information. Just delete the spammer. An old thread is why I am here now. (y)

That is because he is only the Original Poster on his own thread.

Conversation got changed to Private Message, in most places:

There is one now:

Test from Edge. Edit: Looks and works the same on Edge. If you are not on edge, you are wasting space :eek:

Here is a thread about their grapple: Homestead Implements Grapple

Gooder-un, I used it today

On my system the white X appears when the pointer is moved. Backspace has always worked.

No problem with the box on my All-In-One computer, W10 and Chrome. It needs a Cancel button. Yesterday I couldn't find a way to cancel, so I posted and deleted.

On a computer, push the Backspace key or click the white X in the top right corner of the picture.

Please relocate the online indicator out of the Avatar picture. 🙏 Thanks.

Can you post a screenshot? Mine is visible on computer and Chrome:

Thanks, changed mine to 50. (y)

Yes, click this link: Welcome back

If the user did not upload an avatar picture, a square with the first character of the user ID is shown

What was a PM is now a Conversation (y) .

If and when you learn how to use it, you will find that it is much better than the old format.

Here is one made from the bottom of an old office chair, scrap 2x3 and a small dolly that had the casters removed for use on another project: The 48 inch bale spear: The 34 inch stabilizer added: They fit into the Omni Mfg. Transformer 3 point receiver hitch: And mounted on the 3...

Update for the new version. Private Message (PM) is now Conversation:

Picture function both uploading and viewing is muchly better (y)

Right, If you click a picture in a post with several pictures, it opens full screen over the post. Then you click the arrows or use the arrow keys on your keyboard to scroll through all the pictures in the post. Use the Backspace key or click the X at the top right to close the pictures and see...

I miss the thread title at the top of each post.

That might not be enough. Check this thread: Rotary Cutter - Bush hog crazy wheel....

I had a similar problem. Click on Signature in your account and re-enter the correct link.

A request to show or indicate in subsequent posts, the "thread starter" or OP as it was referred to previously.

You missed it: TBN 6.0 Preview

The new posts are highlighted in yellow. After opening in a new tab, click "Mark forums read" at the top of the page.

Read all about it: TBN 6.0 Preview

You can review it just like before by clicking the Preview icon that the red arrow is pointing to.

It chopped the sides on my 1280x960, but not the top or bottom. You can slide it to show the center part of the picture before you click Okay. Larger pictures may crop the top and bottom.

Yep, found one with more room to get cropped off of the sides. Doesn't need to be square, top and bottom didn't get cropped on 1280x960 pixels. Might get cropped on larger pictures.

Did that and resized avatar picture. Signature is good, picture is worse.

I used Bold earlier. Still working now.

Test for signatures. Edit: First link is gone, second link is not a link.

Please do not change New posts. I have found many interesting posts in forums that I would not normally look at. And thanks for making it easier to see what forum the post is in:

What is the size limit now?

All are slightly blurry on my computer:

For me using a computer, it is an upgrade. (y) If you click a picture in a post with several pictures, it opens full screen. Then you click the arrow to scroll through all the pictures in the post. Click the triangle next to "Watched" at the top of the page to see your watched forums.

Good, I liked the old 40 posts per page option. (y)

Or just click "Watched":

Ok, just realized the old threads are my (what used to be called) Subscribed threads. (y)

The new threads are yellow, but the old threads don't go away. There are 222 pages of old threads:

Was not working for me before, just now tried it and it is working on the New Posts list. Not working on Watched Threads :cry:

Looks like my avatar got pruned also, lost the back half of the TORO :cry:

My pictures where showing inline, but now they are gone.

Need instructions on this:

Third try, inline with Insert image:

Second try, inline with Insert image: .

Yes, can see Attachments. Can not see Inserted images from anyone. Website on computer.

This is what I see on the computer

I didn't get Insert image to work. (n)

Test picture upload with Insert image:

Yep, got a lot done out in the shop. :D

The TBN lights are back on

Maybe it will be easier to post pictures

Does Watched replace My Home?

You must not be using the better than useless search function: Don't know what will be available after the new version is installed tomorrow.

Does the wheel loader have a quick coupler for the bucket? |

- I have email notifications turned off: - This is what I get when I click the bookmark for "My Home". It shows the posts, instead of sending an email:

Thank you (I hope).

I lost it

An image search found a drawing that might help understand how the joystick operates two valves:

Thanks for the info. I looked at the Equipment page. All of the pictures are from different locations, not from a normal dealers lot. 👎

The battery is labeled VHLA, whatever that means: None of my AGM batteries have had a vent hose or corroded the terminals like that :eek:. .

Hope it keeps working

And another 524:

When a pin on style bucket is mentioned this is what comes to mind on this Website: Your 3 ft bucket is not a pin on, it is the stock Bob-Tach style for your narrow skid steer. The 4 ft bucket has the standard 45 inch wide Bob-Tach SSQA plate and has been modified so the the narrow 443 quick...

We need pictures of your Bob-Tach. -I have never seen one with horizontal wedges like the parts diagram shows: Bobcat Genuine Parts Catalog – Official Bobcat Company site

Still getting them:

I am also addicted to TBN, but only use a computer. I rarely look at the individual Forums so I don't use the GUI Icons. - I have email notifications turned off. - This is what I get when I click the bookmark for "My Home": - After reading the subscribed threads I click "New Posts"...

Boy was I wrong, This has been the coldest February ever in central Oklahoma. Today is the 13th consecutive day below 32 degrees for the high, but predicted to go above that this afternoon, so the snow should start to melt. The good news is I don't need to start the Toolcat .

For comparison info, this is my 1 cubic yard 6 foot wide Versahandler V417 standard, general purpose bucket:

In my opinion and experience with AGM batteries it is worth the extra cost.

Was surprised that there was no extra weight in the dump bed.

Got one: Reloaded OK :thumbsup:.

Just checked that post on my computer, no A with inverted v showing:

Please keep doing it .

This is what the Professionals use: Why Kinetic Ropes - Yankum Ropes

Just now got one: And the rest of the page:

The couplers are different, but this is how I did mine: Plug it in to read max pressure: Plug in the hose to monitor operating pressure:

Our Herbie Curbie got to ride: Saved a lot of wear on the wheels :D

Re: Are the center 4肺 6 poles load bearing? I have never seen trusses with a butt splice in them like yours: If posts are removed I recommend strengthening the truss to look like this: Or this:

True for tractors, but not true for skid steer, CTL and my Versahandler with 4 wheel steering. If the grapple fits, the machine will clear the trees.

That is the style of my first grapple: Not the best for picking up large brush piles. But, any grapple is better than no grapple.: I can rake just fine going forward with the Monster Grapple...

I prefer the dual lid, long bottom and large opening: https://www.loflinfabrication.com/product-items/monster-root-grapple/ Can't do this with a short bottom style: The small brush was thrown on by hand. Ended up with 5 rocks in the grapple.

Good luck

Where is the power cord? I am guessing that since the Engine Block Heater is an option, our 5610G does not have it.

I just ordered these:

This is what I used, but didn't need to ride on it: https://duckduckgo.com/?q=crank+up+material+lift&t=h_&iax=images&ia=images I guess you could replace the hand winch with an electric winch and be able to ride on the lift.

Are you sure that the block heater is getting power? Do you have it on a GFCI controlled circuit?

Good video, but what is the story on the pencil?

I saw the Log-Lift bags on Mike's channel: Ideal Solution for BULK FIREWOOD? Massive Bags That Hold The Weight #1011 - YouTube

This time it is Error 524:

Today, 6:01 PM: 6:02: 6:03: 6:07: And 6:12:

Here is one brand with no hydraulics: westendorf brush crusher - Image Search

Yep, here it is zoomed in:

Snow Cat:

Good job! I was wondering if you would get it done before the roof went on.

Get one, you will be amazed at what it can do! If the tree is too big for the puller, it gets pushed over, like this dead oak tree four years ago: Reached in and extended the boom some more: Found the balance point and took it to the burn pile:

Yep it can pull most straight up. The ones it can't pull, I have to grab higher and push back and forth as it pulls up, to break the roots loose from the clay soil. Here is the view from the seat of a 4 or 5 inch diameter trunk. Driving up to it: Clamped on: Pulled: Shook the dirt...

Yep, much easier to read with paragraphs

Tilt is available :):

Actually there is 400 pounds on the 3 point to help the rear steering: It does handle the 7' 1800 pound brush hog without the counterweight:

I never feel like cutting a tree down. But I sure feel like pulling them up :D

Today's Posts are all posts in the last 24 hours. New Posts are all posts that you have not seen since you clicked "Mark All Read" or signed in. It is strange that they both say "New Posts"

Old thread about grubbers: https://www.tractorbynet.com/forums/build-yourself/271803-tree-brush-wedge-style-input.html And: https://www.tractorbynet.com/forums/build-yourself/355352-fork-mounted-stump-tree-puller.html Realized that I can put mine on the SSQA to 3 point adapter and use it on...

I did an image search on clearing mesquite and a lot of Grubbers showed up that would work on your CTL: Here is an old thread: https://www.tractorbynet.com/forums/land-clearing-equipment/311893-does-grubbing-mesquite-work-2.html This squeeze type tree puller would work also: Buckthorn...

Just now finished reading your thread from the first post. Very interesting and good luck finishing it .

Worked great for me, but on a TORO, not a tractor:

In any forum double click "+Post New Thread" first. The double click puts you in the "Advanced Mode". Scroll down and click "Manage Attachments": That will bring up this, click "Choose File": Select the PDF and upload. Let us know if that works for you.

Re: Big Barn痴 Retirement Farm Shop

We always keep a few small square bales. Recently getting them in 21 bale bundles: And unloading with the V417: Set it on the dolly: My wife pushed it from the aisle and put a tarp on it:

I usually have a movement every morning :D. For those that need something similar, but bigger, the side dump bucket: https://duckduckgo.com/?q=side+dump+skid+steer+bucket&t=ffsb&iar=images&iax=images&ia=images

Yep, the greener grass is the low area along the terrace:

Well since no comments were made about the "too much rear weight picture", I better admit it was "fake news". Here is the fake with the front end in the air: And the real picture, with the grapple compressing the dead cedar trees:

Yep, west of the Ozark National Forest.

From a horseback riding campout trip in April, 2004 at Devil's Den State Park in Arkansas:

The TORO+Loader pushing the 4' box blade:

This gets my vote because you can use other 3 point implements on it. Would be very handy with a landscape rake. I have one with extra rollback built in, that gets a lot of use:

I have this old 6' landscape rake. Removed the Cat0 3 point frame and use it in a receiver hitch:

This time it needed more rear weight: This time it didn't

Did not have to drill. Hole was there. Can run the chain forward or down the back:

I started with some 24" long Brinley forks: Built a frame: It made some big burn piles: Needed something longer so I made a 54" wide brush fork: It is able to carry more brush: To the burn pile:

Pictures for those too young to know what an ice box is:

Engine sounds good .

Here is a diesel 1955 MF35 next to my shop in 1994: And on the dealers lot after I traded it in on a MF235:

Still happening: :(

for the video Enjoying the build.

The heatshield on our G Series appears to be glued on. It is hard to see up under there.

The TORO+Loader With the 42" bucket:

Here is what I would prefer for the OP's use: Toolcat Utility Work Machines - Bobcat Company HST, 4WD, 4Wheel Steer and 2 speeds. Model 5610 has 3 point and PTO: Model 5600 dump bed: And the Toolcat Forum here on TBN: https://www.tractorbynet.com/forums/toolcat/

Taking out the trash. I love the Toolcat!

My Bobcat dealer is also a Merlo dealer, some of their Ag models have 3pt and PTO: Agriculture | Merlo

From my education at the TLAR School of Engineering and my eyecrometer, it passes inspection . (That Looks About Right).

There are some that will:

Do not need a PTO, it has aux hydraulics: I have a 3 point hitch for mine:

The Bobcat compact telehandlers do not have DEF/emissions stuff. None of the tractors suggested will do everything or go everywhere that my V417 can go and do. Most guys think it is a big machine. Here are pictures to show it's size, relative to a stock 2016 Ram 2500: And no extra...

I finally got a roundtuit and took pictures to show how small it is. Lined up the front with my wife's 2016 Ram 2500: This shot shows how much shorter the V417 is: And this shows that the V417 is not as tall as the Ram:

Wow, got to save that craigslist ad for posterity:

Moving dirt With the 42" bucket: With the 48" box blade:

Image search found one with a cab: