Search results

I have your tractors baby brother with 1100 hrs, still runs like a top.

Welcome to the site , I have 2 mahindras and have had good luck with both, If you post your location those in your area might be able to help with resources, most tractors are very similar in the controls perhaps a nieghbor with a tractor could help .

If this is only an exhaust fan you should be able to reduce down to 4 inch , I have drilled lots of vent holes in brick houses by drilling small holes in a circle then drill on an angle in both directions across multiple holes , you can pop the whole thing out at once,

You did not mention a price, But my neighbor has an xr4140 and loves it,

If you are putting a rubber boot around it then cut a square hole with a grinder or circle saw. Or maybe a sawzall with a diamond blade.

I advertised my cub cadet for sale last yr ,guy showed up with truck and trailer and cash in hand, Was happy to get it,

I have been in many tractor dealerships over the years and none have been what i would consider friendly or very helpful, When it comes to trading they are just like car dealers, My son took his 2009 chevy avalanche Ltz with 140,ooo miles in to look at a new truck , They offered him 3500, He...

I have the same tiller i bought probably 15 yrs ago, It works great after i made brackets to extend the lift pins out about 4 inches. Otherwise the tiller would hit the tires when i lifted it up.

On my kodiak brush hog the right pin comes loose but never the other one, I am going to double nut and try that

Take the QH back and get a set of pats , I did just that and am very happy , I change implements 4 or 5 times every weekend at my farm and it takes minutes,

I could only find the GL4 rated oil at my local farm and home store, All other places had GL5

i use tsc premium universal hydraulic fluid in both my mahindras , The 80/90 gl4 for the front axle

I hope you are getting some rain on your plots , mine have all burnt up, No rain in a month since planting.

THe hookup looks fine, if you are looking for more lift height, you would need to drill an extra set of holes in your side arms, above the current pins , mine have 2 sets of holes there.

My sons father in law was hunting out west with a friend about 5 yrs ago they were attacked by a grizzly that was on an elk kill, they both pepper sprayed the bear but it had no effect and his friend was badly mauled , the bear did run off as he was being sprayed at close range in the face, The...

I have a mahindra 2538 which is basically the same machine , I built a top just like yours also, 550 hrs of hard use, enjoy the machine.

I agree with txcycle on the chisel plow , i bought one a while back for a hundred bucks, it is an 11 shank and my 38 hp 4x4 with loaded r4s can pull it ,but is hard going, plowing will make disking much easier, I have a 6 ft angle disk with 18 in pans and last weekend i disked up a acre and a...

What is a modern mahindra? I have 2 an 04 model 2810 with over 1100 hrs and a 2017 model 2538 with over 500 hrs , Both have been excellent tractors, You might want to explain what you mean by modern.

For all you guys who think you are not food to a bear , you need to start watching scary bear attacks on you tube, Lots of people have been eaten , Especially by black bears, My sister and her family live in washinton state and they are all trying to get out because of stupid laws just like...

14 ft no question,

My neighbor has a 5 ft model and it is amazing how it cuts, a 2 inch tree is nothing , Barely a bump when you run over one,

This past weekend my buddy was brush hogging with his Ls tractor and it started doing the same thing. I asked if the radiator was clean and he said yes, Once we lifted the hood i could see that the oil cooler hydro cooler and radiator were all plugged , I also pulled the air cleaner and it was...

These idiots that try to make everyone believe that this is the first time its been hot, I am 63 and its been hot every summer of my life,

I have a massy 255 with the same tranny. low range 4th feels like your crawling . Jump up to high 1st and your bouncing all over the place, Better off just going slower till you know the land and find all the holes and rough spots.

My son wants a new trailer for his utv but costs are sky high here, double from 3 yrs ago.

I would have the battery tested also , could have a bad cell . Jumping does not always work either. Like ptsg says check all connections. My cub cadet battery cables come loose all the time no matter what i do to them , my other tractors never do.

I would say that is a bargain if the tractor wasnt wreckedor something, low hrs 2019, i would jump on it.

Pretty sure no one is using calcium anymore, at least they shouldnt, Much better products out there that wont destroy your rims,

22 and shovel

Curious about those 4 rusty holes above the axle, My mahindras wont take grease their either.

You can raise it up if you need to travel any distance with it , Like getting in to a remote food plot,

Maybe where you live but not here , I can buy it at any number of farm and home stores right off the shelf, I use it on cut stumps just about every weekend.

I have had this same issue over the yrs with 2 of my cutters, If i am in the field i will reach under and spray some lube up their wiggle the blade a bit and it will loosen up, Go back to work.

MY hst is practically impossible to change ranges if in 4x4, if i throttle down and lift the front wheels off the ground it will shift easy, if in 2 wheel drive it generally will go into low easy and back to m, by pedal back and forth , over 500 hrs and still the same as new,

I have a pirahna bar on my 2538 and have used it hard, it is still very sharp , Ar 400 or harder.

I use a 7 ft woods blade behind my 2810 mahindra , Works great for snow and ditch work , I used to grade our road all the time with it , now a neighbor does it with a skid steer, Your tractor will handle a 7 footer easy

The booms will give you a more accurate spray path and not get on other vegetation as much, Most booms will fold up or back out of the way for transport, Fimco is a widely distibuted brand and is easy to get parts for , I had one and really liked it until it was stolen.

The food plot industry has made small planters a premium but they can still be found. Two bottom plows are a dime a dozen and small disks can be found also that being said for a garden i would go with a tiller hands down ,

Agri supply carries lots of parts also, That is a nice disc,

Thats what people were saying about your Ls not long ago

I have a MF 255 with a manual trans, Hate it for doing loader work or brush cutting where you have to back up a lot, For working in large areas mowing or disking it is fine, Takes a very wide turn, They get stuck easy in wet areas also without 4x4.

I would get the pirahna toothbar also i have one and love it, I have 2 tractors with regular toothbars and they work well for digging but the pirahna is much better, I would go box blade also ,

Look at the mx series if you want bigger and more power,For 75 acres i would want more tractor than the 2501.

That is a fairly light disk and your tractor should handle it , i have a 6.5 ft one just like it and my 28 hp tractor will work it,

I have found that adding 2-4d to the gly will give a better and longer lasting kill.

The op said he had 40 acres tillable 35 of which were leased out , He never mentioned anything about turning a profit or farming it to make a living , Some of you guys either dont read what the Op says Or just want to repeat the same stuff over and over no matter the question. I do agree the Op...

Without a top link you will not be able to adjust the angle of the blade for cutting or smoothing , But if your just wanting to drag gravel for smoothing then that should work ok.

I would love to see how that works, compared to a regular plow.

Buy a 15 or 25 gal spot sprayer, put it on your tractor in one of several places handy plug in to battery and spray all you want without the trouble you are looking at with your method.

If you want to kill weeds then buy 2 4 d it is much cheaper than gly and lasts longer, I bought 24d at rural king recently for a liitle over 20 bucks a gal.

A 25 gal spot sprayer with wand and boom is what you need , Lots of different brands out there , I use mine on the rack of my 4 wheeler or put it in the bed of my utv , You can make acheap carryall for your 3 pt and just strap it on there. Drive along the road and spray at the same time , Just...

When i had my garage put up last yr the crew had a bunch of leftover metal from other buildings i said i would take if they wanted to get rid of it ,to my surprise they gave it to me about 10 pcs 8 to twenty ft long . A couple were 26 gauge, They were much heavier than 29 gauge,i had a hard time...

Apparently this is a discontinued model according to messicks , If you google bushhog brand it will come up,

More than likely the implementwas made for any number of yrs and only the manufacturer would know. Pictures and more info would be helpful

Mine will get grass or bark trapped above the blade and pan and has to be cleared , sometimes i just spray some pb blaster up there and work the blade around , stops the shaking.

I like my pull type for some of these reasons . someone can pull the packer with an atv or utv while i can still be working the tractor on something else, it doesnt take much to pull one. i have an old 8ft one that i replaced the old wood bearings with real greasable ones, Used it last weekend...

I have a 2810 and the key does not shut the tractor off . The pull knob is to shut the fuel off which kills the tractor, Mine is a shuttle and the clutch must be pushed in hard or it will not start, As duffer said check battery terminals My cub cadet terminals come loose all the time no matter...

Before covid i was getting regular gas at my farm in northern mo for 1.19 a gal.

Was that not a warranty issue?

Their are lots of you tube vids on people with mahindra 1626s out there, Most seem to really like them, I have two mahindras 1600 hrs total on both . They are good machines.

Nice rig , Enjoy .

Tordon mixed with glyphosate works well , I have cut and sprayed lots of honey locust willow and osage orange trees with this combo and had very little regeneration.

I have a 28x35 with two 10x10 doors i keep my tractor , 6 ft brush hog 6 ft finish mower 6 ft tiller pto spreader, A utv an atv And lots of small stuff Some of the implements are on dollies and that works great, I built a loft across the back that adds a lot of storage, The garage was a cardinal...

That sounds like a bargain to me , Especially in todays market , The 3600 series are very beefy tractors, Let us know when you get it and post pics,

If you are looking for a 1911 pistol there are dozens of makers out there as good or better for less money, some have been mentioned here . I have a rock island double stack 9mm that is awesome for the money, very reliable accurate and lots of upgrades right out of the box,

Just replace the arms with chain altogether no more problems,

What kind of disk is it and what size ?

Woods and several others have 12 ft batwings that can be run on 40 pto hp , I have a 7ft woods that cuts great but it really sticks out behind the tractor being a single spindle,

We all want discounts Jeff, Implement prices at RK and TSC have gone up 1K on things like tillers and mowers, Look on craigs list , What are you looking to get?

you will more than likely have to get rims to, R1 rims are taller and narrower than R4 and turfs , You might find someone willing to trade.

Those sway controls are turned in all the way , get a big wrench on them , sometimes the threads will get jammed so tight it will strip the threads , Had this happen on our old massey, That lift arm looks bent up also,

You can get into a 25 hp 4x4 fel tractor of just about any brand for 20k or less,

I put 2 rows of 5 led 4 ft shop lights in my 28x35 shop , It is very bright in there, real easy to work on stuff, at night with the doors open you could probably see the garage from miles away.

The wife had to pick a tick of me in the middle of my back last night after a weekend at the farm. Lots of ticks up there, I had to change the belt on the finish mower and they were crawling all over the mower, I do usually spray down with deet or permethrin, Chiggers are really bad also,

My 2538 goes into 4 wheel very easy , But getting it out is another story. If i am in low range forget it , I have to raise the front wheels then it pushes down easy, If the tractor is in 4 wheel changing gear ranges is very hard no matter what i try, once im in 2 wheel gears change pretty easy,

Had the same issue last yr , I had got bad diesel at a station , Tractor ran fine for an hr or so and then just died, Ended up draining the tank and both filters , put new fuel in and it ran just fine,

Plumbing items at the big box stores are the worst, Faucets missing parts is very common, Toilets , shower valves. Used to be if the box was missing the strapping tape it was a no go , But now it seems they will re strap them.

That northstar looks nice , What is the pump rated at and what was the cost if you dont mind? Did you get it from northern tool ?

I have a 25 gal moultrie sprayer that came with a junk single nozzle spray boom , I built my own 8 ft boom for it and now it works fine, I also built a 55 gal sprayerlast yr for a 10 acre crp field i was planting , Fimco is a very popular brand that is good quality.

Look up georgia euipment co. i bought one there couple yrs ago great prices and good stuff.

At my farm there is always a tree or something that has to be moved, A new washout or hole needing to be filled , the loader stays on, For finish mowing around the house it would make it easier with it off but i have done it for so long i just leave it on.

The frame size is the same on the 2 Ls tractors you ere looking at The Mt 342 is the premium tractor over the Mt340 , The 40, 45 5o and 55 hp tractors are all on the same frame, Some on here with the kubota model you are looking at feel it is underpowered for its size ,

I had mine done at about 900 hrs , Not leaking so far ,But i do have a leak From the bottom of the front hub,

I think ex mark is more expensive than toro . Lots of commercial mowers around here use ex mark. My son has a toro titan with my ride and loves it, He mows some rough ground with it. I have a bad boy pup with a 30 hp kohler I have had it for 7 yrs With little trouble, And i mow a lot of grass.

I beleive 8 ft. And it is very light and easy to control.

I have had just the opposite experience , Bought a regular Qh took it back . Put my pats on 3 yrs ago and have not touched it since, When i am at my farm on weekends i switch from finsh mower to disk or tiller to spreader to brush hog to box blade , It takes only minutes, My tractor at home has...

The stabilizer bar is not worth the trouble , you really dont need it , i switch between 5 implements all the time . My brush cutter is the only one i have to widen the lift arms for,

I have a 40 volt wen battery pole saw that extends out , I have cut 8 inch oak limbs with it , it is way better and easier to handle than the gas one i have.

Nice tractor , have fun with it,

Are your lift arms bent in at the ends so they are pointing straght back? Some lift arms i have seen are straight with no bend , those would make pats hard to get to work , I love my pats, This past weekend i changed implements 5 times , easy with pats,

I found Gl4 at farm and home .

Those chains keep the shield from turning allowing the driveshaft to turn inside it , Those do need to be lubed . They actually have plastic like grease zirks on each end , I would just hook it back up .

Yea and i would bet that most of those have been good tractors for their owners.I dont care where a tractor is made as long as it is well built and holds up,

Probably the remote lever next to the seat, That would be an issue with any brand.

Do some research , They are not all made in india,

I loan my stuff all the time to good frirnds and family , But no way to a jerk like that.

The tail flap on the back of the tiller should knock down those ridges , I have a 5 and 6 ft tiller neither makes ridges , I adjust it so it rides level and do not touch it once i start.

I have an old big bee that is a rear discharge , It cuts very good and does not clump . My original woods was a side discharge and it was terrible For leaving rows of grass, cutting more often helps alot but with gas prices it is costly. We have had so much rain i cant keep up with it,

Mahindras are made in 3 different countrys according to what model you are looking at , India , Japan and south korea, I have a new local mahindra dealer , He has 5 or 6 on the lot , Says he has 20 on order,

I have seen where poeple measure each implement and mark the spreader bar for each then just adjust it when you change implements, I used mine for a while then decided i did not need it, Most of my implements are very close to the same width i can do without.

I have a woods a wallace and a grizzly , all are good cutters. Really depends on what you need to cut and how much you want to spend,

Did you do your fluid changes as specified in the owners manual ? My friend has that same tractor and i believe it took a little over 8 gals . Do you have the owners manual ? All the specs are in their.

Love em both.

I have three gear tractors , The cub cadet 7260 Has a horrible clutch, almost impossible to to move slow without jerking forward, on the other hand my 2810 mahindra is smooth as silk and very easy to creep forwardor back, even the old massey is not bad , but you dont have run it at high rpms.

I am pretty sure i have never seen a 24 in exterior door, Would definitely not meet code,

AN LS xr 4140

That looks like a yanmar tiller , Those are S tines you can google them and get them from amazon.

Take the faucet back and get the right one , You have not mentioned anything about whether there is even plumbing in the wall period. You can drop the drain pipe right down into the floor drain , Been doing remodeling for over 40 yrs Cant remember a woman ever knowing what she was doing...

If you go to the mahindra owning and operating forum on here you will find lots of information.

Their is a thread on here about the new mahindra 51 series tractors , Most all of the tractors today era foreign made and parts can be hard to get, I have 2 mahindras and have been happy with both, Over 1500 hrs total .

My top link never comes loose but my side link moves all the time if i dont tighten it , Especially with the brush hog,

If that is true then i would be getting a different tractor, I know my friends Ls doesnt have to be parked for a regen.

Budget now for sure , Tractor prices here are as much as 5to7 thousand more than two yrs ago, My buddy and i have same Hp tractors of similar size but his will lift and move way more weight than mine .We have tested them side by side on several projects and i was very surprised at what his could...

I have a MF 255 with a loader and it can lift a lot of weight but it is very hard on those front spindles 2 wd tractors were not meant for heavy loads hanging out front, 40 to 50 hp 4x4 will suffice.

I bent a pile of them myself , i have 7 or 8 sets , i also welded much bigger washers to them on the inside, Makes it even easier to hook up, I had my pto spreader bounce off one side once when it was empty, The larger washer helps prevent that, Love my pats,

I agree with others here ,for 2500 just buy new . Sister just bought a new toro ztr 54 in with my ride system which is very nice , 4500 dollars , The cub is probably a good mower but you never know.

Why are you sitting idle , You can still use the tractor while it regens,

I had this happen to me last yr , I got fuel where i normally do, tractor ran fine for at least an hr then lost power and kept dying , station admitted they had bad fuel , I had to replace both filters and drain entire system , Hope you find the problem.

You are right and i would suggest he get a ztr, Unless time is no issue then any good riding mower will do.

I get a kick out of you guys who think 2 acres is a lot of grass and that you need a 60 in ztr to mow it, We had 2 acre yard growing up and mowed for decades with a 42 in mower , Dad finally got a 48 in craftsman that lasted for ever, My sister still lives there and just got a new toro...

I doubt that car tires would be much different than the wide turf tires on my cub cadet 7260, never had trouble turning with them in loose dirt.

Is it a shuttle or hst ? Price difference of about 2k.

I called a local mahindra dealer and asked them . Was told GL5 was fine to use ,

You said you got under the tiller to find the slip clutch adjustment, And that it was a pain to hook up. Neither of those sound right , Also it helps a great deal to spray with glyphosate weeks in advance of tilling killing those roots and letting them decay , I have tilled lots of virgin soil...

Their is a large mahindra dealer on i70 at the higginsville exit , Another one on hwy 50. If you search for mahindra dealers in mo quite a few will turn up.

I have two mahindras and have hads good luck with both, Shortly after getting my 2538 a fellow buried his F150 4x4 in the cut cornfield in front of my house . He asked if i could pull him out, I was skeptical because of the mud. My tractor has R4s on it and i pulled him out no problem. The 2665...

Nice tractor ,Congrats , I would love on e of those i have a massey dealer near my farm , Is yours an hst or gear?

Ticks have become more of a problem because few people burn like they used to, Farmers burned feilds every yr , Others would burn woodlots my father included always had a fire going somewhere, Deer and turkey populations have risen from being managed for decades, numbers in many areas are more...

The predator problem has got out of control in lots of areas of the country because very few people trap anymore , the fur prices are not worth the effort, So things like raccoons possums, coyotes, foxes , and even beavers which we have had issue with lately , last fall i got pictures of 5 river...

I have that same tractor and it has been a great machine, Maybe check the throttle and make sure it is not stuck in full . Mine has got real hard to move before and i had to lube the cable.

Just went out and measured my 5 ft wallace , Right at 8 ft from tailwheel to pins,

It really depends on what you plan to do with it, I have that same one and it works great for dirt work or moving and spreading loose or even semi packed gravel like a driveway , But not on any hard packed road. I live at the end of a mile long gravel road and the upper part where most of the...

Taurus has really upped their game lately so that might not be fair to them. Kidding. My mahindra dealer quit carrying them he says because he was selling another brand 3 to one because mahindra had raised their prices so much. I bought my 2810 in 04 and it has never been to a dealer.

I dont see that at all , i am in lowes or HD every day getting materials, No price drop here.

Their are lots of posts on here from every brand that have been waiting for months for parts and service for every type of machine, Blame the covid crap.

I have 2 mahindras wit a total of 1600 hrs with no major issues.

I have the wen brand 40 volt chainsaw , pole saw , blower, and weed eater. they all came with battery and charger, The chainsaw battery is heavier and holds a charge longer, these all were bought online and have worked great , I spent 4 hrs this past saturday cutting trees and brush fron the...

Not sure on specs but one video i watched the guy used a gasket sealer on both bearing surfaces and let it dry before adding fluid. When i replaced mine i cut a peice of PVC pipe I think it was 2 in, I used it to tap the seal in instead of tapping directly on the seal,

Turnips if planted year after year will deplete soil nutrients, If this is food plots i would rotate in clover for a few yrs , That will put nitrogen back in the soil. I have had this same issue .

Right now i would hold off on that as prices are ridiculous on any building materials. That being said i have used the 4x8 sheets of smart siding type products on multiple buildings that are holding up well. They do require painting every 5or6 yrs, Hardee siding is good stuff also , Cheapest...

I agree, I have been a competative shooter for over 30 yrs and have shot with many law officers, No disrespect meant but most were not very good shooters,

They also might not be dead and in the ground with experts like you.

Seed mixes are becoming very popular but you have to mix the right seeds , You cant plant clover and corn or peas together in the same spreader. Seeds like clover and brassicas are tiny and need to be just pressed into the soil in a firm seedbed , Corn , beens , peas, oats , and other large...

I have read where corn head grease can be used in gearboxes instead of oil, I have wanted to try it in one of my tillers because it leaks, just have not got around to it yet.

Pictures would help , but from your description i would say 12 to 14 k,

IF you paid 30 k for a 4540 you overpayed , All new tractor brands have issues with their first service , My buddys new Ls gave him fits, Neither of my mahindras gave me much trouble and i do all of my own service, The 26 series mahindras are much nicer as for as comfort and ease of use , your...

Rocks and tillers dont go well together , A heavy disk might be a better option.

I have an 08 ranger 800 that does the same thing when it gets hot, i will change spark plug wires and see if that helps.

I have that same tiller and you will find that the pins set back to far and when you lift it up all the way it might hit your tires or be very close, I built brackets that moved the pins out about 6 inches. Bought a new driveshaft with slip clutch, Tiller works great now.

He probably is talking about a box blade which has many uses, Box blades use the top link on your tractor to adjust the angle front to back, angled forward more and the ripper teeth will dig in allowing more cutting of the surface and moving material , angle back and you are scraping and...

Nice looking rig . Do you have any in line filters on it ? I built a similar one last yr and my nozzles kept getting plugged up , Finally put an in line filter on and stopped the issue, Good luck spraying.

Getting lawyers involved will cost you more money and frustration than the building total, i know, The state AG or the BBB might help , but more than likely not. Price increase on my building that i ordered in sept 2020 looks to be about 5 grand now, Construction materials have gone crazy ...

Im sure a welding shop could fab up a new link , maybe cut the clevis pin off enough to fit.

Sawyer is right. Look at the tines that are not loose and see how they are connected, With only one bolt those tines will be swinging and banging like crazy . You did not say whether you had filled the gear box and side box with fluid.

Is your tank plastic or steel?

I have a 2810 and the gauge takes forever to come up to whatever the level is , Been that way since new. My 2538 registers right away. i believe it is analog.

We shop around for propane here, why cant you?

My local Ls dealer carries the titan grapple and had the single lid a couple weeks ago, He is in ofallon, At western lawn equipment. I think Coles tractor in farmington carries grapples as well , Might be worth a call.

I have a gear , a shuttle and a hydro tractor , go with the hydro hands down. Shifting constantly doing loader work or even when brush hogging will suck after a while , listen to the other hst fans on here,

All of the implements at my local farm and home stores have gone way up , some have doubled in price from 2 yrs ago

Home depot has a paint called deckover , it has a gritty type finish , Not sure if it can be used on metal. The sand method will work better if you mix the sand in your paint.

I have lived for the last 32 yrs in the middle of a family farm , my friend and neighbor bought homes from two sisters who had decided to move away , the brother passed some yrs ago leaving the rest of the land to him, He unfortunantly owed poeple money and sold to a builder , i now have 80...

I cant imagine not having my loaders on , if i am using a tractor their will always be a use for the loader, the only time i could take it off would be while finish mowing around the structures which only takes a few minutes .

My son bought a new toro with my ride suspension , it is awesome , tried to trade him for my bad boy. no go, I bought a suspension platform for under the seat , it works very well.

I know but we grew up together and our wives are good friends , so i grin and bear it. Funny his family quit loaning him things years ago. I wonder why.

I had a 28x36 metal garage with 2 10x9 doors and concrete floor last yr for 17,000 Cardinal carports.

I have basically the same tractor , and mine loosens up with use if you dont keep the jam nut tight. It looks like your 3 pt lift arm is bent also , these are very soft steel and bend easy , i know my neighbor has bent mine several times when borrowing my tractor.

If their are lots of roots to deal with the tiller would be a bad idea . A landscape rake could possibly get lots of the wood pieces scraped into piles to pick up with the loader, then disk.

I am a remodeling contractor, Everything has gotten crazy , Premium latex enamel trim paint 90 a gallon , roll of 14/2 wire 140 bucks, every copper fitting , pex fitting, Box of screws, you name it has doubled , tripled or more. a small cart of materials at lowes is gonna be 500 dollars.

tractor supply carries traveler brand , Get the premium trans hydraulic fluid it will work fine,

How can they prove he got covid from dressing a deer. They cant even tell you if you have covid with any certainty,and no one has gotten cwd from eating venison.

Several of your posts seem to suggest that you run between 1500 and 1800 rpm , if that is true then you should be running at much higher rpms , especially for mowing

I use a 72 in finish mower and brush cutter on a 38 hp tractor no problem at all and i cut tall heavy grass and brush,

I bought a suspension platform from seat warehouse and used the factory seat on my zt and it made a huge difference, I think it was 140 bucks .

I have used a rear finish mower for 25 yrs. Works great unless you have to mow around lots of trees. I now use a zt at my home but i still use the rear mower at my farm.

AS ericm979 says . It is better ti use full pedal in low gear than little pedal in med . I do all finish mowing , most brush hogging, and disking in med range , tilling and digging in low , always 2000 rpm or above.

Your right i have lots of equipment and i use it all the time, I have damaged lots of things but usually damaging something is my fault and not the manufacturer.

I was talking about the guy in the video of the mahindra brush cutter, He says he is hitting concrete with it and wonders why things are bent up

Some people have no business running heavy equipment , This guy is one of them.

At 1200 lbs that titan looks pretty heavy duty. Also has 100 hp gearbox. There are some reviews on you tube,

My cub cadet always did that until i figured out it was a switch for the lights , It had to be in a certain position even with the lights off. My mahindra 2810 has a seperate kill knob and if you dont turn the key off it will kill the battery, My neighbor has done this to me several times after...

I have a big bobcat dealer 2 miles from my house, they have 5or 6 tractors that i can see from the hyway, They seem to be getting them pretty regular, Their is another dealer on my way to my farm that is a large ag dealer. and he only has one or two occasionally,.

It is so easy to sharpen the blades with an angle grinder which you can get at HF for 15 bucks by reaching underneath. You dont have to get your body under it . I am 63 yrs old, no way im taking those blades off for a 5 minute job, I also have 3 brush cutters and a finish mower to deal with.

I was lucky i guess. My garage now is about 4or 5 thousand more than when i ordered in September of 20 .

I went with cardinal carports, I took 6 months to get but i love the garage 28x36 on concrete.

Looked at a new Ls the other day .4k more than a yr ago.

I have an 84 inch woods blade it has worked well for grading our part of a mile long gravel road. I think it works great for plowing snow, angle it to the side you want the snow to go and move as fast as you can. It throws the snow out the end , Been doing it that way for 30 yrs. Make sure the...

welcome.

No cream cheese here either, Been looking for couple months.

My cultipacker had wood bearings when i bought it but they were broke up . I replaced with real greasable ones, I think agrisupply sells wood ones . Not sure if they will fit a disk

3 pt sprayers generally come with either a small pump mounted on the tank or a roller pump that connects to your pto. The roller pump ones are a little more money but they have more pressure. The roller pumps do require some maintenance. Fimco is a brand that comes to mind.

I believe D.R has rough cut mowers like that in different sizes, I think they are quite a bit less than 10 K

I have never fertilized my 4.5 acre yard and in the summer i have to mow twice a week, I have friends who go nuts if they spot a weed in their yard and call out the lawn experts .

What kind of foam are you using? And how do you get it in the tires?

Thats great, Who did you order from? THat is a long narrow building , Is it for a particular piece of equipment?

The mahindra does not have a dpf filter but i doubt the emissions are any less than other tier 4t tractors.I do like the 4 cyl engine it just sounds better than my other 3 cyl ones do.

When i ordered my building i was told 16 weeks. Ended up being 20 weeks because of covid they said . But two guys put it up in 8 hrs, I sat in my lawn chair and for the first time in my 62 yrs watched someone else work. Very happy with the job.

I have turf tires on my cub 7260 and they do good in most conditions , but to say r4s are junk is dumb, I have r4s on 2 other tractors ,one which has over1100 hrs , I have not had the sliding problems you talk about and i use them on our 360 acre hunting tract where we have lots of hills and...

I had cardinal carports build me a 28x36 with 2 10x9 roll up doors and a 36 in walk door. Last yr. i love it , Had it put on concrete , Best thing i ever did , You will regret going to small , Spend a little more now or alot more later.

I have a 50 cal can on one side for chains and pins , O the other side is a small metal tool box with pliers wrenches screwdrivers wire and clevis pins , On the back of the roll bar i built a shelf that holds my chainsaw large hammer prybar gloves and a big pair of channel locks.