Search results

I finished my cab & snowblower on my b8200, pulled it out of the garage the night before our one and only snow storm, turned the wheels and snapped the steering column. It was tough to steer before, but with the blower up, the added weight was to much I guess. I mended it, but not much of a...

I'm making power steering system for my tractor. I need the midpoint of the cylinder to be 19" and a throw of at least 7". I found one on amazon that is 20" in the mid of extension, 16" closed 24" open. It would be perfect if it was just an inch shorter.

I have a Lincoln 125 HD gasless flux core wire feed welder loaded with .035 wire. It says it will weld up to 5/16" mild steel. I need to create a mount for a power steering cylinder on my kubota. Can I use this to make something strong enough to withstand the abuse of a power steering system, or...

Trying to figure out the max safe angle I can run my blower at. I'm working on changing to a hydraulic lift instead of depending on the 3pt. All hte cylinders I see have 6" or more, but I only need 3-4". I figured with 6" I could lift higher, but wouldn't want to lift to high while the blower is...

As part of my cab project I decided to give remote start a go. I'm using 2 wireless relay boxes from china, about $8 each, plus a 30a relay for the glow plugs. One relay bypasses the key switch to ON, the other is a 2 relay system which bypasses the starter and activates the starter solenoid and...

I wouldn't have thought to buy the LED version if there wasn't a giant banner on the regular one saying "THIS WON"T WORK WITH LED BULBS" with a link to the LED version. Got the flasher working! Turns out I had a bad ground on the chassis, so even when hooked up, it only partially worked. It...

Nothing special on the front, just regular subframe that came with the blower. I suppose it's quick attach in the sense that you remove 2 pins and the blower comes off. I picked up this wonderful mower for it: The tractor as it sits now. All the panels are off for paint at the moment, along...

In the summer my kubota b8200 will be a lawn mowing machine, and in the winter it will be a snow blowing machine. One of those two I'll need some protection from the elements. Rolled into home depot to look at a new toilet, an hour later I rolled out with $173 in steel and a die hard...

Picked up a b8200 with no attachments for 2k. 4wd, HST, turf tires. Planning to use the belly mower and front mount snowblower from my fathers B7200, since he has a FEL and never uses them. Little rough around the edges, but starts and works as it should. Mower is a RC60-72 and blower is a...

I found the issue. My once splined shaft is now round and smooth. If anyone can ID the pump, the numbers are completely illegible.

My '51 Oliver TLB ran dry saturday. Shut it down, filled it, ran it for a bit, and zero movement at the sticks. Took off the rear hose to the hoe and put the hydraluics to the rear. It oozed out, at best. If anyone has a suggestion on gettting all the air out, it would be greatly appreciated...

Bought an Oliver 77 Industrial tractor. Seems to be the rarest machine on earth, I can't find anyone else with one. The closest is Steve W. here with his 770 industrial. Original motor was replaced with a super 88 gas motor quite some time ago. Auto-choke and auto-throttle, fires up right away...

Edit: I figured out it's a '55 Oliver 77 Industrial with Ware loader and backhoe. The 77 was really popular it seems and parts should be plentiful. 35hp 6 cylinder engine. No idea what hte hydro pump is making, there's no way it started out looking like that. It's older but aside from the...

One rear tire is leaking, can hear a hiss. It's falling apart and should be replaced, but as a for now fix, can it be tubed? It's 11x24 and looks like layers are coming off in places.

I'm looking at an older hoe. It starts and runs great, but the rear hoe is extremely slow. The guy says it's due to being low on fluid. The front went up just fine. I'm a novice when it comes to hydraulics, I'm wondering if it might be the pump, as that can get spendy. Front bucket went up...

I'm looking at a TLB and having a hard time finding information on it. Specifically I'm looking for it's wet weight, LOA, horsepower, transmission/options, top speed, or anything else I can find. From what I've been able to find, it seems to be about 9000lbs, has the 3cyl gas 158ci engine...