Search results

https://www.worx.com/en-US/WORX-JawSaw-WG307.aspx LimbSaws by Priefert | Home Thinking about ways to adapt a chainsaw to a boom on a front end loader--Would the Worx JawSaw have any potential to be mounted to a boom with some type of actuator to move the chainsaw across the jaws? Also...

Charterhouse Verti Seeder 1204 | eBay Wondering if this type seeder can be used in a prepared seedbed as well as no-till? http://www.golfonline.sk/fileadmin/sandbox/pdf/Overseeders.pdf See page 3 in this PDF.

Now that the rear remotes are installed on my Kubota B9200, I'm thinking about opportunities presented by the new capability. One, among many, that come to mind is converting the ROBB to hydraulic and how to get the 180 degrees of rotation required to utilize all three functions of the ROBB...

two 5 ft box blades with auto rippers I had not heard of mechanically retractable rippers until running across this ad recently. Anyone ever used a box blade of this type. Here's a picture for posterity:

Just finished installing a cylinder for angle control on my York rake today. Plugged in the QD's and the cylinder would move only a short distance and in only one direction. The newly installed valve Surplus Center - 3 SPOOL 8 GPM PRINCE MB31BBB5C1 DA VALVE appears to not pass fluid when the...

Posted wrong picture. This is correct picture. Adding rear remotes to Kubota B9200 and needed a way to tee into the return line which happens to be 3/4" (0.750") diameter. Drilled and bored a hole thru the 1 1/4" diameter aluminum shaft to slip fit over the tubing and then cut internal ORING...

Someone mentioned hydro fracking in another forum. What is the process and what does it accomplish? My lawn and garden irrigation well has been in service since '76 and puts out about 10-12 gpm depending on how dry the year is. It's 31' depth and 20' to water using a 1/2 HP submersible in 5"pvc...

I'm looking at adding hydraulic angle control to my vintage York landscape rake is the reason I'm asking. I see the dual cylinder setup on most snow plows/blades and they are usually plumbed as single acting but controlled with a double acting directional valve. Is there a stability advantage...

I have a 72" Gannon Earthcavator that I've used on my Kubota B9200 22.5 HP and about 2800 lbs including the FEL. I've not used it a whole lot yet but I can tell that the 740 lbs scale weight is a bit heavy for the B9200 although the FEL makes a good counterbalance. I've decided to put it up...

In the process of adding rear remote valve and needing to know where to tee the return line into the system. Since the 3PT position control valve (shown in pic) will be close by, I'm looking to tee in somewhere in this vicinity. Looking at the hydraulic parts list (courtesy of Messicks), the...

Needing some help identifying this QD male tip. I'm needing a matching set (coupler and tip) so can tap into the FEL power beyond line for power to rear remotes. The thread in the tip is a 3/8"-14 NPT if that helps with the ID. Edit: The diameter of the tip is 0.680".

Does anyone know of a supplier offering couplers with the male o-ring "built-in" to avoid an adapter fitting? I'm doing a remote setup for TnT and would like to screw the female couplers directly into the DCV ports. If not that, I can go with adapters but even then would like to avoid NPT and...

https://docs.google.com/viewer?url=patentimages.storage.googleapis.com/pdfs/US5456028.pdf I ran across this expired patent and thought it looked like a good way to do some leveling with the FEL bucket. (See figures 5, 6 & 7) Perhaps someone already manufactures something like this? It brings...

http://www.tractorbynet.com/forums/attachments/282409-pto-cement-mixer-anyone-familiar.html I promised to do a follow-up report (on the above thread) if I ended up buying the mixer which I did yesterday. The owner graciously accepted my offer for $280 for which I am grateful. Got it mounted...

Looking at this mixer on a local classified ad but owner doesn't know how the dumping mechanism works. I'm needing one and this one seems attractive at asking price of $375. Any help is appreciated.

Hester 72" Rollover Box Scraper | eBay

Brazing/Cutting/Torch Kit at Menards Wondering if anyone has tried this mapp/oxygen outfit? Seems reasonably priced considering the Mapp and Oxygen "bottles" are included.

Poulan Pro 42CC--Motor runs fine but it can't drive the chain sprocket. Can turn the sprocket with a pliers but turns hard. Anyone know what the fix is going to be? Thanks.

Was thinking about tillers the other day and wondered if anyone has tried using a conventional tiller while backing with the tractor. I'm guessing that the rear shield may need to be raised and there would be tractor tracks remaining but a quick pass in the forward direction would take care of...

18" inch Solar Tracker Linear Actuator 1250lbs 12 Volt DC 2500lbs Hold Strength | eBay Anyone tried using a 12 volt linear actuator for a top link for tractors with no auxiliary hydraulics?

Here's what I've come up with so far: The winch is a 3000 and, yes, yard and garden residue is probably all it will handle and that is my intention. The black lever added is a piece of 2" SQ aluminum and, yes, it does increase the mechanical advantage considerably. The cable passes thru a small...

This is a prototype/mockup of what the winch/lift will look like under the 4x8 trailer. The geometry works out fairly well but haven't tried it yet with a load. It does make the HF 3-ton winch groan and slow down when starting the lift but the lever arm (shown with the arrows) increases...

I bought this 6' Gannon off of Craigslist a while back and need to sell as it is too heavy (740 lbs) for my B9200. Been trying to decide whether it would be worth the time and expense of repainting for a better price. I ordered decals for it and probably should go ahead and repaint but time...

I'm needing to come up with a power dump on my 4'x8' "monster" trailer used mainly for hauling lawn and garden residue to the local landfill. Been thinking about installing a 12 volt winch under the trailer to accomplish this in conjunction with the existing tilt feature on the trailer. Would...

I'm looking at a couple used Deere PHD's at an upcoming auction and the newer one has a 12" auger. I'm wondering if I would be able to buy other brands of augers that would fit the Deere. I can't tell what size and type the shaft is coming out of the gearbox. Would any of you guys or gals...

I ordered one from CMP earlier this week and received it yesterday. Put it together and played with it a little a couple times since. Works great in spite of the ground still wet from snow melt!

Wondering if anyone makes/sells a combination pin/stud for the lower links that is 5/8" diameter on one end and 7/8" on the other end. This would be to allow the same implement to be used on both CAT0 and CAT1 tractors. I would envision the double ended pin would have a 3/4" or 7/8" thread in...

Skidloader Hydraulic Powered Bucket Soil Conditioner | eBay This is an interesting concept which I have not seen previously. CMP Attachments Hydra-Bucket - YouTube

I'm looking at the pine straw rake on Everything Attachments where they have a great video of how the unit is assembled. Would anyone know where I might find a video of a pine straw rake in use? I'm curious how clean of a job the rake does. EDIT...

I just noticed an ad this afternoon showing harley type rakes listed at $7000 for a 7' model. I'm asking how can a tool that is basically a heavy duty tiller cost a thousand bucks a foot? Admittedly I know very little about what goes into the design but still-that sounds like a lot of money...

Kubota Tractor L3010 | eBay Any thoughts on what this tractor should bring? I don't believe it has any auxiliary hydraulics, but haven't heard back from the seller yet. Thanks in advance for any input.

Needing to convert the seat on my B9200 to a swivel type to make it a little easier when running 3PT attachments. It looks like there is room to let the seat swivel at least 30 degrees either way. Wondering if anyone has modified their seat to swivel and could use some ideas from anyone on a...

Resurrecting an old thread here where I was asking if a 6' (72") Gannon Earthcavator was too large for my Kubota B9200. I didn't buy the one initially listed on Craigslist but did find one down in Oklahoma a few weeks back. It finally dried out enough that today I took it out and played with...

I'm looking at building a Pergola like shown which is 8'x12' outside dimensions post to post and will be on a concrete slab. Can buy a precut kit of "..... constructed of #1 grade, natural select, treated southern yellow pine. In addition to this process, which prevents decay and insect damage...

JD 3point Back Blade - Nex-Tech Classifieds Can anyone give me an idea what it's worth? Thanks.

I'm told that it's a John Deere but I'm curious as to how it works. Is it 3PT mounted? Looks to be a cable/pully arrangement of some kind. It's listed on CL for $100.

Needing some opinions on how to proceed with this project. Pixs show the 40 year old 9'x12' patio made up of 3' squares outlined with redwood. The squares were originally poured at two different depths to form a checkerboard pattern with loose decorative stone (since removed) placed in the...

Kubota B9200 Hydrostat--has the forward-toe/reverse-heel pedal. I find this very awkward to use even after plenty of seat time to feel comfortable with the tractor. I've had occasions where when mounting the tractor I accidentally stepped on the reverse-heel pedal. I've learned to overcome...

I've noticed in quite a number of discussions on the TBN forum that it is a unanimous no-no to drill holes in ROPS tubing but rather accessories such as lights should be attached with other means such as u-bolts. I understand the logic of safety and liability but would just like a little more...

I have the 6 ft. York Landscape Rake on the B9200 Kubota, mainly for counterweight for the Fel. I find that is works fairly well as a rear blade for moving snow with the drop/down blade in the down position. The blade hangs just in front of and against the tines. Didn't try it with the blade...

I recently installed a seal kit in the BF350 FEL on by Kubota B9200 to fix an external leak past the gland or "packing" letting fluid past the rod on one of the lift cylinders. I was surprised by a couple issues with one being the fact that there was no Oring to stop fluid getting past the...

Thought it would be handy to have a receptacle mounted to a side panel of the tractor for plugging into the block heater. This would, of course, be the male but would like to have it bulkhead mounted and inside a protective housing. It would be something like that found on electric yard tools...

Had a very slow 90W leak out of the right front spindle on my B9200 so ordered replacement seals from Messick's and also a block heater while I was at it. (Messick's=great folks to work with) Noticed a lot of play in the hub after removing the wheel/tire and discovered the outer bearing had...

Looks like a 3PT except it's a parallel linkage. I looked on the Branson site and don't see it. Something custom built?

I thought Artisan was kidding at first but "after further investigation", he is not. I've also wondered about the purpose of item 70 "STAY FOOT COVER LH" also. My B9200 has them as all B9200's probably do. Both items are a bit perplexing to me as to their intended purpose and whether or...

Kubota B9200 HST Compact Tractor Diesel 22 5 HP 4 Cyl w Woods 5ft Mower | eBay Wondering if someone knows the purpose of the small piece of plexiglass looking material that is mounted to the sides of this Kubota? They're at the rear of the engine cowling and may have to zoom in to see them clearly.

Kubota 9200 tractors Wondering if anyone has a clue as to what parts are interchangeable with the Kubota B9200. The listing says "9200" but it sure looks similar to the B9200. Thanks

Howse 3-Point Rotary Tiller 54in. Width, Model# RTC54-R | Category 1 Cultivators Tillers| Northern Tool + Equipment I'm having trouble understanding how the rotation can be reversed and wondering if someone can explain it. It says that the "A-frame and gearbox assembly can be reversed". I...

Here's the scan shown right side up.

EDIT: Next post shows scan right side up. Here's a scan of the voltage regulator. I took readings with VOM (both resistance and diode more) and found several discrepancies compared to the Check Table in post #1 above. For instance going from (+)red to either (-) blue I was seeing a little...

Could use some help in understanding this page from the B9200 Shop Manual. I'm trying to test the voltage regulator as the charging system doesn't seem to be working. I did check the alternator (dynamo in Kubotese) output which appears to be fine with more than 20 VAC. Anyways, referring to...

The B9200 Kubota owner's manual calls for front tires 23x8.50-12 turf for 2WD and 24x8.5-12 for 4WD. Have a couple questions: First, is there enough difference in the rolling radius/circumference of the 23" and 24" tires to cause binding problems with 4WD? Second, is there any way to find out...

These are 12"x7" to take 23 x 8.50 x 12 tires The 6-bolt BCD is 115mm (4.53") and the pilot is 69.5mm (2.74") Two piece rims are standard on this model but single piece would be fine.

Wondering what type of fittings are used on the B9200 and BF350 FEL. I assume they're metric but are they British standard or something unique to Kubota? Looking to add some rear remotes and Tilt and Level. Thanks Edit: Also should ask about the quick couplers on the loader and what they...

Is this unit worth $1000? It is a York 6 ft. model RS with optional scarifier, gauge wheels and drop-down blade. Ad says it has never been used but the paint looks tough.

Looking to invest in a pressure washer and wondering if a PTO powered unit would be feasible. Thinking about putting together the components myself since the pumps are relatively cheap compared to "turn key" units. My question is regarding the availability of 540 PTO speed increasers to power...

A question comes to mind after reading some very interesting threads on adding weight to the 3PH. Would it make sense to build the weight system so that the attachment point of the toplink would cause the weight to tip back when the 3PH is raised? I would envision a fairly tall weight...

The B9200 Kubota owners manual lists a top speed with the HST (hi range)and 13.6-16 rear tires of 11.72 MPH @ 2500 engine RPM. I'm curious why, when top engine RPM is 3000, would Kubota not show the max speed of 11.74 times 3000/2500 or 14.09 MPH.

Looking at a used 6' Earthcavator but concerned that it may be too much for my Kubota B9200 HSTD with FEL (22.5 HP) What do you guys think? Edit: Might add that the tractor with FEL weighs in at a little over 2500 pounds. Edit: The Kubota is a FWA with turf tires.

I'm needing to remove a pinetree stump down about 36" or so below ground level. It's about 18" in diameter and currently is flush with ground level. The reason I need to remove it is that the landscaping was built around that tree and it's the perfect spot for a new tree. Wondering if a...

Needing to build or buy a hood guard for my Kubota B9200. Could use some help on design or guards on the market. I'm thinking of one that comes back about half way over the hood and may or may not include a grille guard. Thanks for any help you can give me.

Is there anyone who makes aftermarket brackets? I realize that it still requires cutting the tubing but that's no problem with a hand held bandsaw. The uprights on my B9200 ROPS are out of parallel with each other by about nine degrees or 4 1/2 per side. This complicates the folding...

Hi guys, Would anyone know where I could find a replacement hood for my B9200? Also wondering if the B8200 and B9200 hoods are the same. Thanks

This is on a Kubota B9200 where there are three lines going from the tractor hydraulics to the FEL valve block. There are, of course, the pressure and return lines and the third line is labeled as "neutral". Can someone help me with the function of this neutral line? Is it similar to a "case...

The attached page is from the B9200 Operator's Manual showing the auxiliary hydraulics. My question regards the "From the neutral port of implement's control valve" which is the FEL. What is the function of the neutral port on the loader valve? Is it something like a case drain as opposed to...

Just acquired a B9200 with BF350 FEL. The instruction decal on the side of the loadrt is partially obliterated and trying to figure out the procedure for parking the loader on it's stand(s) Can someone point me to this info on the web? Thanks Nelson

Anyone know the top MPH with turf tires? Thanks

I see videos of guys "plowing" with what is sometimes referred to as a "turn plow" and it almost makes this old farm boy sick. Nine times out of ten (it seems anyway) the moldboards are no where near "in the ground". There are few things neater that a moldboard plow running correctly and...