Search results

I have a 2010 Case Farmall 45 tractor with an L350 loader. The loader's listed lift capacity on tractordata.com is 2,000 (full at pin). I have 26 pallets of wood shavings being delivered next week and am intending on using my tractor to unload them. The manufacturer has stated that a loader...

I currently have a 2010 Case IH Farmall 45 HST. It only has about 450 hours on it and does almost everything I need to do. The only thing I don't like is it is fairly lightweight and has trouble hauling decent sized logs out of the woods with me cutting them in 8ft or so size sections. I'd like...

I was out doing some general maintenence on my 2010 Farmall 45 HST tonight and noticed that my 3 point hydraulics are hiccuping. When lifted to do height or even just barely off the ground with the bush hog in the cutting position it will lower just a hair then catch itself with the tractor...

I currently have a 2010 Case IH Farmall 45 HST with ROPS that I'm fairly happy with. I'd like more tractor (who wouldn't), but it gets the job done. My only problem with it is that it has no quick attach for the FEL or a 3rd function remote . My dilemma is this, should I add a quick attach...

My 2010 Farmall 45 manual states it takes 9.6 gallons of Hytrans Ultra. I followed the manual for my first hydraulic fluid change this weekend. I pulled both drain plugs, let it drain, replaced the HST filter, and replaced the hydraulic filter. Upon refill it was full at 7 gallons. I did...

I have a 2010 Farmall 45 that I'd like to add a third function and grapple to for picking up logs and brush piles. I do not have a quick attach bucket. So, I'll need to figure out what aftermarket quick attach to buy and convert my existing bucket. I also have the front end loader joystick...

Got a new toy yesterday! A Woods BSS72 box blade. This thing is built heavy duty and should last my lifetime for sure. I smoothed a section of logging road out last night and the 45hp tractor pulled it with ease with a half full box.

I live off of a red dirt road, the cheap gravel the county and logging companies use for roads here in Arkansas. My house is a reddish brown brick. Our once gravel driveway is so old that it is now basically just dirt after 40 years of car travel. I'm looking to resurface it this month. I'd...

I have a 2010 Case IH Farmall 45 that I'm about to buy a box blade for this week. I've narrowed it down to either a Bush Hog/Rhino SBX72, Bush Hog/Rhino MBX72, or a Woods BSM72. The SBX72 weights in at 550lbs and is $895. The MBX72 seems to have all the same features plus a swinging rear...

I have a 2010 Case Farmall 45 I'm needing to do some scheduled maintenace on this weekend. Do y'all have any experience with aftermarket filters? They are significantly cheaper from Oreilly's than the Case filter at the dealer. For example, my hydraulic filter, part # SBA340500920, is $23 at...

What do y'all think of this deal? Is the price good? He says it was purchased with a tractor that has less than 500 hours on it. I don't believe the blade was used for the majority of those hours. He says there doesn't appear to be any dings or anything in the blades and the teeth are good...

I have a driveway that is roughly 70 yards long. It has become mostly dirt over the years. After all of the snow we saw here in South Arkansas last month it has now developed several long 8"-12" ruts that I've had to smooth out the best I could with a shovel and hoe. It is now starting to get...

While bush hogging the pasture this weekend I realized there was radiator fluid leaking out of my hydraulic oil cooler. I didn't hit anything in the pasture. It is just open field. There's no way this thing would leak unless it has a hole in it, right? I'm trying to decide if I should try to...

I managed to bend my steering/connecting rod pretty bad yesterday by getting hung up on an old stump. Everything seems to work okay other than when my right tire is pointed straight my left tire is pointed to the left. Is part #35 probably all I need? It shows it in two pieces in the diagram...

I have a 2010 Farmall 45 4wd that I'm looking to get a box blade for. It is a 6ft wide tractor. Should I look at getting a 6ft or 7ft wide box blade and why?

What can I expect to pay for a rear hydraulic remote add on? What about an additional remote for the front to operate the closing on a grapple? I have a 2010 Case IH Farmall 45 HST.

I have the chance to get a fairly decent 76" wide by 20' long trailer to haul my farmall 45 with FEL tractor around on. It has 3 3,500lb axles instead of say 2 5,400lb axles. Will this affect the handling of the trailer at all? It is a steal at $1,200. I won't be going more than 30 miles one...

I need to remove the bucket on my Farmall 45 with the L350 loader. Is there a trick to getting the c clips out? I need to get them out without scratching the bucket up too much. They put a 5 ft bucket on my tractor on accident so I need to take it back and pick up the 6 ft they have waiting...

I have a Case IH Farmall 45 I purchased earlier this year. The other day I managed to somehow run over a little tree that popped back up, busted my grille from my hood and kind of bent everything out of shape. I backed out of the situation and got it back to the house. I popped the hood and...

I have a 2010 Case IH Farmall 45. I currently have a Bush Hog SQ172 (6 ft.) bush hog for it and plan on getting a 6ft disk for it. I'd like to be able to tow all of this to my hunting locations for food plot work. I will be towing with a 2004 F150 4wd. I want a bumper pull style trailer...

I'm wanting R1, agri, tires. However the dealer only has R4, industrial, tires on the tractor I want. He is going to try and find a set of agri tires to swap out with before I show up Saturday. In the event he can't I have to decide what to do. How do you like your R4 tires? Ever wish you...

Its me again Margaret. I thought I had it all figured out on what tractor I wanted until Saturday. I'd looked at the Mahindra 4035 and really liked it and the price, but no dealer network around here which left me with my other option. A Kubota L3940 HST. Well, I finally made it to my local...

Right now I can get an L3940HST with FEL for $25,800. I can get an L4440HST with FEL for $23,800. I've never owned a tractor. I can count on one hand how many times I've actually used a tractor. I plan to bush hog, grade with a box blade, and clear brush. Am I really going to miss all the...

What is MSRP of a Kubota L3940 with a 724 FEL?

I have not had the chance to test drive either one of these machines. I hope that changes this weekend. I was quoted around $23,000 this weekend at a Mahindra dealer for the 4035 HST model with FEL. However, he didn't have one on the lot for me to try out. I have not gotten a quote for the...

We looked at a 4035 today and it was a good looking tractor. They didn't have an HST on the lot but they did quote me a fair price. Do the 4035 HST models have cruise control? Is it easy to use and is it a valuable option?

I've been looking at the New Holland and Case IH compact utility tractors on their websites. Are they the same? I know a lot of their site is the same as well. Heck, last week both sites went down at the same time. Are Case and NH sister companies now?

I know this is like asking what's your favorite movie, but I thought I'd ask anyways. Could y'all give me some recomendations on what tractor(s) would fit my needs? Here is what I have. We currently own 40 acres. About 5 of it is pasture, 2 acres we will cut with the riding mower around the...

Hello everyone! I just joined the forum today. I'm from South Arkansas. I noticed the 0% financing available from most every manufacturer recently and decided I might should look at buying a tractor now rather than later. My wife and I just purchased 40 acres and a home in the last 4 months...