Search results

Have a new L6060 with dealer installed rear remotes, 2 sets. Seem to be getting fluid through them, but not under enough pressure to work hydraulic top link or mower. Both attachments work fine on our M4 so its not them. Am I missing something or did dealer hook them up wrong. Checked hoses...

Thinking about purchasing the M4D-071 Kubota. Was wondering if anyone has had problems with them or things I should look for. Thanks in advance.

I have a Mahindra MD72 brush cutter, I believe it's made by Kodiak. Broke the cross bearing that connects the PTO drive line yoke to the yoke that attaches to the cutter's slip clutch. Was wondering if anyone knows what "size" of cross bearing I need to replace it. The parts manual list three...

Has anyone had experience replacing the suction hose that joins the metal hydraulic pipe hitch suction assembly. Located right under the drivers platform on the right side of the tractor. Went to hook my backhoe up yesterday, and when I tried to work the rear hydraulics I got a real bad leak...

My 4035 is dead in the field. Thought it might be battery so replaced it. Still nothing, no lights, no ignition, no electrical. I've checked fuses all are fine. Any ideas?

The specs on my 4035 says it has a front end loader lift capacity of 2400 pounds at maximum height. Can anyone tell me if this is the absolute maximum lift capacity. I have a 2800 pound concrete water tank to move, but only need to lift it about a foot of the ground. Will the 4035 handle...

Had a problem where my 4035 would not start. Dealer has replaced the fuel filter as part of overall service I'm having done. To fix the non-starting issue he also replaced the pipe filter to pump rotor. He's charging me close to $360 for the repair. My question is, would this be something...

Purchased my 4035 last Summer with a 485 backhoe attached. First thing I did was have the sales person remove the backhoe so I could put the tractor to work cutting brush, drilling post holes, moving gravel, etc. etc. I致e finally got things enough under control I壇 like to put the backhoe back...

Was wondering if anyone is running the 6 foot Mahindra/Kodiak rototiller behind a 4035. Was trying to get mine hooked up the other day and it appears the PTO shaft is about 4 inches too long. I do not want to get into cutting the shaft if I do not have to, so was wondering if I am doing...