Search results

I have a question I am hoping someone out there in Kubota land might be able help with. I used my hydro B7500 about two weeks ago during 25-35 degree weather with no issues. Then, after not using it for a week, I took it out again, but the temps were now in the single digits here in RI. It...

Could someone with either a 2630, a 3000, or a 3030 please tell me what size pins hold your bucket on your loader, and the loader model# ? Also, I am trying to find these measurements: 1. across the back of the bucket, center of loader arm bracket to center of loader arm bracket 2. the width of...

My B7500 tractor has an LA302 loader and takes a 48" bucket. I would like to replace the bucket. I found a new one, 54", for a reasonable price that fits on an LA403 loader on a B2630, B3000, or B3030. Does anyone know if the pin size is the same and if the brackets are the same width, etc...

I am looking for some high/low pricing in southern New England on a hydro kubota B7500 with Woods backhoe, loader, tooth bar/bucket hook, tire chains, and 3 pt. auger with three different size bits, and 3 pt hitch set up, 780 hours. I would appreciate any input anyone has. Thanks. Teach

I am looking for some high/low pricing in southern New England on a hydro Kubota B7500 with Woods backhoe, loader, tooth bar/bucket hook, tire chains, and 3 pt. auger with three different size bits, and 3 pt hitch set up, 780 hours. I would appreciate any input anyone has. Thanks. Teach

I have an idea, not sure if its too much to be worth trying though. Any advice or help here would be greatly appreciated. Here goes...I have a 10+ year old Lowes (yard machine type) vertical/horizontal wood splitter that I would like to convert into a PTO driven splitter if the cost is...

Question: I have a 21 hsp hydro Kubota b7500, and was wondering if anyone can recommend a 3 pt wood splitter that will run reasonably fast (similar to a stand-alone splitter in the 20-ish ton range)? Also, can a 3 pt splitter be run off the loader's hydro's? I don't have rear remotes. I...

I tried searching this topic and read dozens of related posts, but didn't find any with a straightforward enough answer. So here goes...I'm considering picking up a 4 way, 5' Curtis snow plow all set up (from Curtis, not someone's home fabrication) for the loader arms of my Kubota B7500. It...

I have a fairly new 14' tandem axle trailer w/ brakes that I use to move my Kubota B7500 w/loader and sometimes a brush hog, to move firewood, lumber, etc. I currently use a 2002 full size extra cab 4WD Chevy pickup with tow/haul mode capability, and set up for the trailer brakes. It tows it no...

OK guys, I need someone to tell me what I'm doing wrong with my middle buster. I just purchased a middle buster from TS to use on my Kubota B7500 (21 hsp) to turn over some ground that I just mowed, prior to disking and planting for food plots. I am working in some old fields that don't really...

I recently purchased a brand new 14' tandem axle landscape trailer. It will mainly be used for hauling around my Bota b7500, but it will also be used for hauling lumber, firewood, dump runs, etc. on occasion. I, like many others, was torn about which size to buy. Aparently size does matter. I'm...

I need some advice. Do you guys think a B7500 (21 hsp, hydro, w/ loader) is enough to run a 60" Landpride 3 pt. finish mower? I would mostly be mowing some fields and an old orchard that I have reclaimed after mowing for several years with a brushhog. I might also try mowing my own home lawn...

Has anyone ever heard of, or know anything about Machete wood chippers? I'm looking at a used one, it is yellow in color, kind of on the small side (chips 3", maybe 4" pieces), 3pt mounted. It is missing a piece on the top, some sort of a spline/shaft (not the PTO shaft). Trying to nail down how...

I'm looking for an approximate value on a Yanmar 169 D with a frontloader, 16 hsp, ROPS, 4 X 4, wheel weights, looks to be in good shape, 380 hours, R1's. Not sure of the year. Thanks. Teach

Has anyone built their own wooden chainsaw case/box? I'm trying to plan out a box that will carry two saws, bar oil, gas, scrench, chains, etc. to carry in the woods in/on my Kubota. Would love to see some pics. Thanks! Teach

Has anyone built their own wooden chainsaw case/box? I'm trying to plan out a box that will carry two saws, bar oil, gas, scrench, chains, etc. to carry in the woods on my Kubota. Would love to see some pics. Thanks! Teach

With the emphasis on the "no" in snow! I went out a limb yesterday and removed my tire chains from my 'Bota B7500 for the season. Hopefully I haven't invited Mother Nature to strike hard like she just did in NH, VT, and ME. Anyone else in the northern latitudes feeling this brave (or lucky)? Teach

Here is a project that I completed in the fall and plan on continuing this summer all the way to the other end of the house. Couldn't have done it without my Kubota B7500. Yes, this little machine unloaded those blocks of granite curbing from my landscape trailer and moved them across the yard...

I have a fairly new (year and 1/2 old) Husky Rancher chainsaw that is having issues. The oiler doesn't pump any oil to the bar/chain. I tried cleaning the saw with the cover off and even put on a brand new bar and still no oil. Also, if I leave the saw in the workshop for several weeks without...

After viewing several threads about logging, I came up with this idea. My buddy who is getting pretty good at welding, heped me create this logging hitch. I have a B7500 w/FEL and as a property manager for a 200 acre parcel, I get to use it to carry out the forestry plan. This logging hitch...

I admit it. I have cusomization envy. BUT, today I started to do something about it. After looking at several pictures of ballast/weight boxes that some of you posted I decided to try my hand at one too. I never needed one until I recently bought my B7100 with a loader. I started by building a...

Before I start, let me say that I am aware of the multiple other threads on welding, of which I have poured over many of them. Unfortunately, while I did pick up some ideas, I am still perplexed. I am posting this new thread because I am jealous of all of the awesome creations that I see some of...

I am wondering if anyone knows whether a B629 backhoe for a 1977 B7100 will fit a newer, 1990 B7100 HST? I know that the FEL's for the older models will not fit the newer models as the newer B7100 has a slightly longer frame. Also, does anyone have any info. on a B629 hoe? Thanks. Teach

Has anyone had a 3 pt. hitch freeze on them? My 1983 B7100 appears to have a frozen 3 pt hitch. It works fine when it is above freezing, but last few days the temp. dropped into the teens and hasn't been above freezing during the day for a few days now. The tractor is kept outside, but is...

I am looking into buying a toothbar for my B7100 with a 48" bucket for digging into embankments and brush/tree work. My dealer desribed one (didn't get the manufacturer's name) that bolts on the sides of the bucket and when the bolts are loosened up, it can flipped up and stored inside the...

Does anyone have any pictures of a tool box mounted on their b7100? It has rounded fenders and side grab handles making it difficult at best to mount anything on the fenders as I have seen others do in their pictures of other tractors. Thanks. Teach

I just purchased a 1990 B7100 HST, 4x4, with a Kubota loader and turf tires. Does anyone know what size tire chains I need for the rear tires? Also, can I expect this machine to have the same pulling power (trailer, skidding trees, etc.) as my 1983 STD 4x4 B7100 (which the wife must go now!)...

I just purchased a 1990 B7100 HST, 16 HP, with a Kubota loader, turf tires, rears filled, and ROPS from a local dealer. The tractor has 800 hours. The tractor is in nice shape and appears to have been well cared for. Used machines this size with a loader are hard to come by in my area (Rhode...

My brother just bought a B8200 this past week. It has a FEL and a Kubota backhoe, hydro. power steering. There is a slight leak from the front left axle (right near the tire) and from the belly of the machine (hydraulic fluid???). Any ideas on what these might be from?. Also, we are having...

I visited a new Kioti dealer in RI last week. I looked at two brand new CK20's that had just been delivered (hydro. & loader). Both of them had dings/creases on the edge of the driver's rear fender. One was about the size of a nickel, one about a quarter, both with cracked or scratched paint...

I just purchased a series 10 Landpride tiller, 42", about 10 years old, but in good shape, very heavy duty looking/feeling, offsets, 3 extra tines, for $600. How did I do? I plan to use in on my 16hp B7100. Does anyony else have any experience with this brand? My local Kubota dealer carries...

I have a chance to buy a Landpride tiller, 42", 7-8years old, in good shape for about $700. Question one, does that sound worth it? Question two, will it work ok on my 16hp std B7100? The newer tillers from Landpride that are similiar models say they require 17Hp min. Thanks. teach

I have a friend who has a 14 hp Kubota, manual shift, and uses a 3 pt. hitch log splitter. The splitter is from N. Tools, brand new. The problem is, it operates (forward and return) so slowly, it doesn't even seem worth using to me. It has plenty of power and will split most anything, just at...

This one is for all you folks who like to hunt and/or cut firewood. Here in Little Rhody it is getting very hard to find private property to gain access to for hunting. but I just scored 200 acres! How? I traded seat time for sole trespass rights. I offered to help the landowners with their...

This one is for all you folks who like to hunt and/or cut firewood. Here in Little Rhody it is getting very hard to find private property to gain access to for hunting. but I just scored 200 acres! How? I traded seat time for sole trespass rights. I offered to help the landowners with their...

Bota\' or Yanmar...HELP!!! I have a dilema. I currently own (I have had since last July) a 1983, Kubota B7100 manual shift, 16hsp, 4x4, 2000 hours, in good shape, runs great. I use the following implements; york rake, scraper blade, rear dirt scoop, forks (carry-all), 42" brushhog, rear tire...

I have a dilema. I currently own (I have had since last July) a 1983, Kubota B7100 manual shift, 16hsp, 4x4, 2000 hours, in good shape, runs great. I use the following implements; york rake, scraper blade, rear dirt scoop, forks (carry-all), 42" brushhog, rear tire chains, and I have, but have...

Yanmar or Bota? #597841 - 03/04/05 03:39 PM Edit Reply Quote I have a dilema. I currently own (I have had since last July) a 1983, Kubota B7100 manual shift, 16hsp, 4x4, 2000 hours, in good shape, runs great. I use the following implements; york rake, scraper blade...

I have a dilema. I currently own (I have had since last July) a 1983, Kubota B7100 manual shift, 16hsp, 4x4, 2000 hours, in good shape, runs great. I use the following implements; york rake, scraper blade, rear dirt scoop, forks (carry-all), 42" brushhog, rear tire chains, and I have, but...

I'm looking for a loader, on the east coast, for a kubota b7100, 1983, 16hp, manual trans., 4x4. I have been told that the loaders for the b7100's that came out in the 1990's won't fit the older models. Any suggestions? I have a dirt scoop, which actually works pretty well, but I still want...

Looking for a loader for a 1983 Kubota B7100, 16hp, 4x4. The loaders that came out for this tractor in the 1990's won't fit. I'm looking for one on the east coast to save on shipping (to RI). I have a dirt scoop, which actually works surprisingly well for the price, but I still want a loader...

buying a bx22 I recently found a bx22 (tractor, loader, backhoe, trailor) that I reeeeeally want to purchase (used), but...it is 2000 miles away. The private owner suggests we use a company called "Sqaure Deal" to set up an equity account, then I would put in a down payment (rather a large one...

Does anyone know of anywhere on the east coast that manufactures or sells new/used loaders for a 1983 Kubota B7100, 16hp? My local dealer here in RI told me that the loaders that were made for the B7100's that came out in 1990's won't fit my tractor. I bought this tractor used last year and I...