Search results

I just got a new to me 2016 Kubota L6060 cab and love the tractor!! The one question I have is the fuel gauge seems to be not accurate at all. The tank holds 13 gallons and some change and when I get to 1/2 tank it goes from 1/2 tank to below empty in 1 hour. I recently ran the tractor for 1.8...

Was thinking about buying a new L6060 cab but was wondering if I might wait for the next generation of Grand L tractors. Anybody have any idea when we might see a new series of Grand L's? Maybe a 80 series?

Took a trip to check out the YT359C tractor. My first impression was WOW! The yanmar fit and finish is better than any kubota or john deere i have looked it. The attention to details is incredable. The frame is very solid! I like the cab roof design with its low profile stance and a real...

Well i just turned 3000 hours on my 2008 L3240 cab tractor today! Just wanted to give a report on how the tractor has held up since i bought it new in 2008. I have always done my own maintenance and did all the scheduled maintenance by Kubota's schedule. The tractor runs as strong as it did the...

I have a l3240 that has a speed sensor and the three wires have come out of the plug that plugs into the sensor. (was into heavy brush and it got snagged) My wires can be slipped back into the plug but I don't know which wire goes where. If you lay under the tractor the sensor is on the right...

Well I knew it was only a matter of time. My flexable factor cab antenna broke off. It is a screw in type. Anyone know if you can just buy the flexable tip? how much am I looking at and where can I get a aftermarket tip?

Can someone please help me get the correct part to repair my kubota T1460 Garden Tractor. I broke the pto cable that engages the mowing deck so I went to my local kubota dealer and they looked up the part and asked me for my s/n off the tractor.and they ordered the cable and it was not the...

Sometimes (but not every time) I go to re-install my 724 loader back up I find that I have excess pressure in the loader lines to the point they will not connect without breaking the lines and bleeding off some pressure. Anyone else have this problem? What causes this? Is there something that...

Just wondering if anyone has any insight on when the next series of the GL kubotas will hit the market. Any rumors??

I'm in the process of building my pole barn workshop and need help deciding on a way to make my building look good while using a shed type roof. My story is I have been collecting building materials for the past few years getting good deals and trading around to get my materials for this...

I mowed the grass yesterday and did 5 acres in the Tennessee humid heat (about 90 deg). I had on my favorate pair of sunglasses while mowing enjoying the comforts of the cab. I got finished mowing and got out of the tractor and almost instantly my glasses fogged up and were soaking wet. This...

I have a yanmar tiller that slides to cover my tracks. I really like this tiller but I hate the tines because they are very fragile and they wear to fast. The yanmar does a great job of tilling deep and fine even in hard packed dirt. I break a lot of tines and wear a set of new tines out once...

I'm thinking about which of these two tiller would be the best to go with. The ccm looks to be very heavy duty buy the price is much higher than the sicma first choice. What are the biggest differences between the two tillers? What do you folks think? Anyone have any experience with the first...

I have searched this forum and still don't really know which tiller to buy. I need a tiller that has very good tine wear properties and that will handle large food plots and one that will hold up very well. I was looking at CCM and they seem good. What do you folks think is the BEST heavy...

I have all the stuff to do a third function EV on my L3240HSTC and I really need someone to post some pictures so I can locate the correct PB line to connect into. It would also be nice to have ideas on mounting locations and quick conect brackets for the loader. As they say a picture is...

Hello all, I have a L3240 kubota cab tractor and I already have a loader and already have the electric hydraulic valve (double action open center) with mounting plate. My plan was to use the electric valve as a true third fuction independant of the loader hydraulics. My question: How do...

I have the 66" round back heavy duty kubota bucket on my 724 loader. I would like to put a thumb type grapple attachment on the bucket. The bucket is built very very heavy duty. Just wondering if anyone has mounted a thumb to heavy duty round back bucket? Do you think my bucket is good to...

We got some super warm weather this weekend here in Tennessee and I decided to move some top soil around the yard. My 724 loader got a nice workout and got some much needed seat time. Now I can't wait till spring!!! See the Kubota 724 in action!! YouTube - kubota 3240 cab

Anybody have a block heater for the 40 series? I looked at kubota web site and they don't list any heaters for any of the 40 series tractors. They did however offer a heater kit for the 30 series tractors. I wonder if the 30 series heaters will work on the 40 series given you match up engine...

Just wondering what some of you folks paid for your Markham LD grapple. There web site has no prices so anyone know how much they are?

I have the 724 loader on my 3240 and would like to know if it will work with other skid steer attachmants or is it a kubota QA only? Anybody know? Will it work with the Markham LD grapple. I asked the question to the Markham folks but they did not know and said if its "universial".

Anybody know of a online web site where you can keep all your maintenance records? If not, does anybody have a spread sheet that will do this? Mark 08 3240hstc 724 loader

My new 3240hstc seems to guzzle up diesel like it's going out of style! . I using 1.6 gallons per hour while mowing with a woods prd7200 mower at pto speed. In normal grass that I've mowed many time before with my 3430hstc. Just as a comparison my 3430hstc used only 1.1 gallons per hour with...

I'm looking at a replacement for my 3430hstc and test drove a new 3240hstc and the cab is much much quieter than my 05 3430hstc. I looked at the specs and both tractor have the same displacment engine so the quiet must come from the new cab design. Anyone else notice the difference? My 3430 is...

I have a ever so slightly used 2007 (70 hr 3240hstc) that I can get a great deal on at the loacl kubota dealer problem is what kind of APR will I get on the financing for this tractor. How many years will kubota credit go on slightly used tractors? Will kubota credit give the the good special...

I got a 3430HSTC it has the following options, work lights, R4 tires, CD/FM/AM radio. 372 hours mostly finish mowing. Always garaged looks like showroom new. Just courious what I should expect to get for a trade in on a new larger cab kubota. What whould it be worth if I sold it instead of...

I see that the b series tractors have the hydraulic screen/strainer that you clean. Do I have one on my L3430? Mark 3430hstc

Sorry I did not think the first post took.

I want to buy a 3pt pto sweeper collector to collect the grass clippings from my 5 acre yard I mow. I need a large compartment that can hold a good deal of clippings and a pto driven sweeper. I want to keep the cost down as much as possible any ideas on making one or any links on where to buy...

I want to buy a 3pt pto sweeper collector to collect the grass clippings from my 5 acre yard I mow. I need a large compartment that can hold a good deal of clippings and a pto driven sweeper. I want to keep the cost down as much as possible any ideas on making one or any links on where to buy...

Anybody have a horn on there kubota? Do any come factory with this option? I have a 3430 CAB and it does not have the horn nor the option to get one. I would not use it much but it might come in handy at times. Anybody got one? Mark

I just read on the Yanmar disscusssion that Yanmar will team with Cub Cadet this year to build tractors for the US. If this is so, who will build the Deere compact tractors? http://www.tractorbynet.com/forums/yanmar/94509-yanmar-returns-u-s-new-post.html Cub Cadet(R) and Yanmar(R) Announce...

I got a great deal on the hoe and called woods to find out all the details about it. It is a DuAl 3pt backhoe that has it's own hyd pump. It is a DuAl model 1015. The guy from woods said that Woods bought out the DuAl company a few years back and that the Bh 7500 was basically a copy of the...

I have a 3430 cab and a older 1015 Woods-DuAl 3pt backhoe attachment I would like to install. I know about the cab issues with backhoes but I can fab up almost anything I need to extend the hoe 3pt brackets. Questions: If I modify the hoe to hook-up to my 3pt hitch will I over stress the top...

Just wondering how cold is to cold to use your tractor? Anybody ever use there tractor below 0 deg? How good do the new kubota diesels start when it's sub zero? Just courious, Mark >>>>3430HSTC

I need a loader and have decided on a La723QA loader. What would be a good price for this loader (installed). I have a 3430hstc tractor. Thanks all, Mark

I'm going to get a loader for my L3430HSTC and was wondering which loader would be the best to get? The most important factors are quality, user friendly hook-up and hyd controls. Anyone like the bush hog better than the factor Kubota loader? Thanks, Mark

I just bought a L3430HSTC and did not opt for the radio or the cd player option because I thought it was to high. Oh and by the way I LOVE THIS TRACTOR!!! Any body installed a regular radio or cd player n the factory cab? I figure you will have to remore the roof and I figured the wiring...

I'm considering a new tractor with a cab to mow 9 acres with in a medium rough field. I currently use a 2610d Yanmar (30hp) with a 6ft finish mower and it gets the job done for now, but with my alergy problems it's KILLING ME! I need a cab in a bad way! I have compared the two tractors 1533 vs...

I'm considering a new tractor with a cab to mow 9 acres with in a medium rough field. I currently use a 2610d Yanmar (30hp) with a 6ft finish mower and it gets the job done for now, but with my alergy problems it's KILLING ME! I need a cab in a bad way! I have compared the two tractors 1533 vs...

Anyone have any price information on the new B3030 4WD with the cab option? What is a good price? Thanks, Mark