Hello everyone,
My water pump is shot and needing replacing. Quick question, which way am I turning the pump fan to remove? I’ve given it a go in both directions, clockwise and counterclockwise. Looking from the front the fan turns clockwise.
Many thanks
Hello all, I'm trying to source out new injectors for my 35 perkins. The injectors in questions have an "F" tab on them and I'm unable to find much online. Would anyone happen to have a beat on these? Very much appreciated.
Hello all,
My father and I are close to buying a used 4609 4x4 cab with DL260 loader. Now my question is about the loader which the salesman says is the north american version of a euro quick attach. I'm not very familiar with quick attach systems as this is our first with it. So what exactly...
Hello guys and gals, I知 trying to get my grandfathers 35 running properly. Bought new in 61 with the Perkins, used all summer to rake but started running like crap awhile ago, fuel knock under load, stalling after running for awhile and having to pull it to start, otherwise it would just crank...
Hello all,
Tractor hydraulics got absurdly slow, loader would barely lift, baler gate would barely lift using the rear remotes. Cleaned mesh strainer on pump plate and mesh filter on side of tractor but to no avail. Replaced hydraulic pump and O rings on suction pipes and problems persists if...
Hello everyone,
Well the ol' 35 with the 3 cylinder perkins had a bad injection pump, I replaced it with a new one, fired right up after cranking for a couple seconds, but now there is a distinct knock as if the timing off. My "score lines" on the pump and the housing match up perfectly. My...
Hello everyone, I am looking for some help. I was baling some hay today when the tractor seemed to be under a great deal of "load" and not from the baler, when all of a sudden the right front tire locked up and was skidding. It let loose after a meter or 2 with a loud clunk. So that was it...
Hello all
Just installed new head gaskets and it's time to set the valve play, I know it should be 0.010-0.012 in. for both valves per head but I have no idea on how to do this. If anyone has paperwork or can explain in detail I would be greatly thankful. I heard it was easiest to go 1...
Hello All,
First time poster,
My question is regarding the tractormeter/tach for my grandpas 35, it quit working years ago so I ordered a new gauge and cable (both were shot). The new gauge came with standard connection for the cable which runs to the cam but also a second connection with a...