Search results

Looking at purchasing a trash pump or sewage pump to rent out. We got 300" of snow this year and many basements will flood. The gas is higher flow but will require a truck to pick it up. It is louder and requires to be outside. Electric is cheaper to buy but will not flow as much. I am thinking...

We are right at 300" so far this year. I will put up a few pics. The first one is of my house and you can see where my Mini Aussie Barney got up there and walked around a while. We had two storms that were 78" and 59". I run a snow blowing route of 79 driveways. I am hoping it quits soon. Enjoy...

I have a 20 pound mini Aussie that pretty much goes everywhere with me when I can make it safe. I have a Kubota M6 with an instructors seat and looking for something that can go on that and she will not fall out of. I run a snowblowing route and between going ahead and back she falls off of the...

I can pick up the one you guys see all over the place for just under 3k new. I have ready nothing good about them. Have you actually used one? I can also get a used Karcher a few years old for 3k with only 18 hours on it. Typically I would go for new but not thinking so after what I have been...

I expect most have heard of the snow storm in Upstate NY. I am in the place you read about. My house got 80" in a few days. It was pretty intense. I run a Kubota M6-111 hooked to a Cyclone 92" inverted blower. I hear everyone saying the inverted is no good in deep snow. Maybe it is not the...

Have had a 500 gallon diesel tank for a few years and all going great. Run tons of additives in the winter with zero issues. Last year I thought it might be a good idea to put the goldenrod water filter on it just as added protection. Everything worked great. We never got as cold as usual. This...

Very nice pair of Nokian Tri 2 tractor tires in great shape. Rims are not included.(2) 400/80/24 tiresTires are in Lee Center NY. $1495

My new Kubota M6 front windshield washer drains back into the reservoir. It takes over 30 seconds to get water to the windshield. Dealer tech says they all do it. I have never had a tractor do it. If this is standard I can put a valve in the line but I cannot expect this happens to everyone...

Purchasing a new M6 that must have been sitting for a bit. I run a snowblower on it. One back tire has a flat spot in it. I drove it 25 miles and it did not come out. In the old days you would hook to a disc or plow and put the tire to work. I have nothing to hook up unless I hook to a tree or...

Just bought a new M6-111 and putting a large inverted blower on it. I need to know where the test port is for the 3 pt hitch to tie in an accumulator. I hear it is not as easy as just teeing into the externals. Thanks for the help.

I am putting an accumulator on my Farmall 110c for the 3 point hitch. I believe the port is right under the cab but no one at my dealership can tell me for sure. I have also heard it may mess with my draft control but will worry about that more when I figure out where to hook it in. I believe...

I am putting an accumulator on my Farmall 110c for the 3 point hitch. I believe the port is right under the cab but no one at my dealership can tell me for sure. I have also heard it may mess with my draft control but will worry about that more when I figure out where to hook it in. I believe...

Looking at an M6 and comparing to a Farmall u series tractor. How is the M6 transmission for shift speed. I snow blow with the tractor and looking for something this size that shifts without clutching. It will only be between these two tractors. I lean Farmall.

Who has the best transmission? Farmall 120U or Kubota M6? I snow blow and need something I can shift up and down without the clutch.

I am looking at putting an accumulator on my rear 3 point hitch on my 2021 CaseIh Farmall 110c. I believe I have to plumb in under the cab? Can anyone verify this or is there an easier way? Thanks

I have heard that the 24 speed is a full electronic shift through the ranges. I know it has the shift splitter that is electronic but I expect the main three ranges are still cable and not electronic?

I am looking at purchasing one or the other of these two. It will only be one of these two. I have always had Case and had good luck. The Kubota looks good also. I would be using it for snow blowing so pto power is key. Nebraska tests show the Kubota to be about 80 pounds less torque. Pretty...

Looking to put a back up camera in my new Kubota svl65. I have a cheap on in there right now I grabbed locally but looking for an upgrade. I have a few needs: Has to stay on all the time Has to have pretty good resolution Has to have a large screen. I am getting older and do not want to squint...

My 2655 is just over 2 years old. Blew snow with it all winter. Last week it warmed up for one day and tried the air. It did not work. I called the dealer for known issues. Between the condenser and the radiator there are two steel hoses with fittings on them that rub the condenser. Mahindra...

My tractor is not sitting here and I am thinking about putting an accumulator on the 3 point hitch. Does anyone know if it has an outlet readily avail. for this? Thanks

Dealer is telling me there is no power beyond for a CaseIH 75c. They also tell me that is the case for all CaseIH Farmall series. They put a divider valve on my 75c and I hate it with the grapple. Does anyone have any ideas I may be able to come back at them with? 2 functions at once is not...

I am looking for a part number for my loader curl/tilt cylinders for my Mahindra 2655. This is the same as a 554 TYM. I need a set and cannot find anything online about them. Mahindra wants 2100. Anyone have a part number?

Title tells it all. My fault. They are dead. Now to replace. I cannot find a cylinder online that is the exact matchup to Mahindra but Mahindra wants 2100 plus tax. Not happening. They are 29.26 eye to eye retracted. 1.4" cylinder. 2.75" bore. Pin is only 1". I have found close in 1.25 and may...

I know the engine is the same size but wondering if there are any injector pump, injector size or camshaft diff to make the power?

I just purchased a 2017 75c new. It has to go back to dealer to get all the add ons put on. Dealer is telling me that the third hydraulic has to be a split type setup that this tractor cannot take 3 full hydraulic setups even though I have room for the third lever on the dash. Is this true or is...

Put an offer on a new Case 75C today. Why do I not see more Case tractors out there. I see Kubota everywhere and when I tried one I cannot see why. Is the Case brand not what it use to be?

Has anyone used the inverted cyclone snow blower from pronovost? My dealer wants 11,500 for a 92" with wings. They are suppose to be awesome. What have you heard on prices?

Tried out a new 7060 and a Case 75c Drove both, loved the 75c cab. Seat, layout etc. I thought the new Kubota 7060 was behind the times. My question is if I order with an air ride seat is the seat much more comfy? I am looking to get into commercial snow blowing so could be in the tractor for a...

Looking at a new one now and love the cab. How do you like yours and would you purchase it again?

Went and drove both tractors. Loved the case. The cab and layout was outstanding. Larger tires. Many things I liked better but I tried the 7060 due to the brand. Figured I had to take a look. I liked the nitrogen lift on the 3 point hits for the bounce of a snow blower. I think I could get...

I am comparing tractors of all colors and wondering if anyone has put an almost new tractor on the dyno to see how it did against it's specs? I wonder if any brands cheat it a little bit.

Looking at new pull type snowblowers in the 80-90 inch range. My dealer can get me the meteor brand but rumor was they were not special. The brochure looks nice but still just a brochure. This dealers and others can get me just about whatever I want up to 10k. I am going no where near that...

I am going to do some plowing this winter commercially and residential. I believe the pusher is pretty much straight line unless I get one with hydraulics. The blade has some nice features but I feel would be more suited for residential than commercial? When using a blade that is angles how much...

Thinking about what the next step is for my landscaping company. Not sure I want to get into mowing but certainly something I need to entertain. Big farm show coming up in 60 days so I can see all brands there. Ferris is made here so they seem to be very popular. What should I look at for a...

I have a grapple ordered from EA. Talked to Travis about width. I ordered a 72" dual lid as that is the width of my loader. We talked about a 66" and I thought I want the same width as my loader. I think I made the right choice but not sure I made the right choice. I have never used one. Weight...

Well business is far better than I expected. Last year I purchased a new truck and the year before I purchased a new trailer. This year so far I have purchased a new tractor. I cannot purchase anything more. Tractor is a Mahindra 2655 with loader and 7' box blade. Shipping weight is 4200, loader...

Just got off the phone with Travis from Everything Attachments. He certainly knows his stuff. We discussed 66" vs 72" grapple and I went with the 72. I will be putting it on my new Mahindra 2655. After it gets here all I need is a few good storms. :)

Got my new 2655 cab today. I will be hauling it often. I see in the front there are bolts where I could possibly put hooks for a chain? I hate going around axles. What have you guys used for quicker chain down time that is rock solid.

My new 2655 cab came in. Got to do a little snowblowing with it. I tried to upload a pic. I took about 2 minutes and then it struck me. You guys know what it looks like. I am not good enough or have the right attitude to sit here and fight my computer. I have a tractor that needs me.....:)

I do gravel driveways for a living. I am expanding out into full time landscaping. I am getting insurance quotes but not really sure what is good and what is not. Here is what I have from my agent: General Liability Coverage Part Coverage Limits General Liability - Each Occurrence $500,000...

My new Mahindra 2555 with cab comes in tomorrow or the next day. I am trading in my 2538. I have many attachments as in the summer I make my living with my tractor. Mainly I do gravel driveways and till lawns. I have a tiller or course, getting a grapple, box blade, landscape rake, forks,. I...

Umbilical hernia operation today. New Mahindra 2655 coming next week. How does one stay inside and not climb into his new tractor? I am not sure I can do it but the Dr. assures me I will.

Looks like I will get it with a hd 7' box blade, 2 rear remotes, block heater, wr long hydraulic kit for a grapple, hydraulic top link. I think that is about it. I will probably order an everything attachments grapple for it. I should have it in a little while. No rush I go Thurs. for a hernia...

Got with a friend of mine who does decals etc. He and I designed a couple of signs for my truck. I wanted magnetic as in the winter I do snowmobile and in the summer I do landscaping. I wanted to be able to change them out. He made them up and they are beautiful. Outstanding job. I could not...

This week I expect I will be ordering my new Mahindra 2655. It has a lift capacity of 3100 pounds. I will most likely be ordering a grapple of some type. My thoughts are that I may be able to expand my business through the grapple. I could do storm cleanups etc. I am thinking I need a 6' wide as...

In the process of ordering a new Mahindra 2655. Mahindra is offering 200 off each implement but not sure it I will go that way. Tractor has a 6' bucket with 3100# of lift. I would be looking for a grapple to do storm cleanup for hire amongst anything else I can find for it to do. Is a double...

I am currently looking at two tractors. A Kioti nx6010hc and a Mahindra 2655. The Kioti has a rating of 2700 and the Mahindra has 3150. Both dealers tell me the tractor can carry a ton of pellets. When the weather breaks I may ask to try on to find out. The forks really cut back what I can lift...

Was at a show today and saw a new Kioti nx5510hc. Looking at it or nx6010hc. Does it lift what it says? 2750? I love my Mahindras but this looked like a fine tractor for less money. Any issues? Pros or cons?

Went to a show today to look at new tractors. I currently have a 2538 that I love but thinking larger with a cab. I went to look at the 2655 and came away with the thought that I cannot drive it. I do not fit. The new seats in these things do not go back. The salesmen were unaware. I had two of...

The little bit I can find on the 2655 says it has a better joystick for the loader. Anyone seen one yet? I hated the one that I looked at this fall.

This summer I put a new driveway in using millings. I did not any diesel to them although many folks told me to. I asked on here and the theory was it would was the asphalt off the stone. My driveway got hard except the very top still was like a fine gravel. I rolled it many many times with my...

I have a 2001 Rance Renegade all aluminum enclosed trailer. It has a gvw of 12k. 24 foot long drive in drive out. Trailer is very well built. I am thinking of repurposing it and put my tractor in it but unsure if my gate can hold it. Tractor should be in the 5500 -6000 range with attachment. I...

If this big hurricane coming into Florida does make it to the Carolina's I have a friend I could stay with to do some contracting. That is if he is still there. I am not set up with fema and have no desire. My buddy could put the feelers out for work before I got there. I would be take a tractor...

Finally broke down and purchased a larger truck. I was towing way beyond the capacity of my little Tundra for the last year and decided to step up my game. I got a 2017 F150 supercrew black 4x4. It has the 3.5 ecoboost. Now for the tuner. I will have to do some research there. So far I really...

Tym is about 3500 less. It does have dpf. The tym lifts less, revs higher, small 4 cylinder vs larger 3 cylinder and the front end of the tractor is put together different to mount the motor. Does not look as strong. Pretty much everything else looks the same. What do you guys think? My Mahindra...

Dealer told me Mahindra is going to announce 30 new models at the meeting. This will not be all tractors and could just be new paint of utv's for all he knows. Have you guys heard of any new tractors? I did hear of one over 100 hp coming out.

Put down my asphalt millings yesterday and rolled them with my 2500# ride on roller. I went over it many times. Watered the driveway this morning and rolled again. 85 degrees out now and rolled it again. I cannot tell where I have or have not been. These millings are not like fresh asphalt so I...

My millings will start showing up at 8am this morning. I am all dug out and ready for them. Base is hard as heck as we put it in years ago. I am shooting for 3" deep before I roll it. I will be using my loader and my box blade for the application.Today is sunny and 85 so hoping it packs hard...

Pretty sure if I make a move it will be this tractor. Anyone have any cash pricing? Thanks

Dealer does not have a 3550 in stock. Is the cab that much nicer than the 2555? I think the 3550 is too wide and heavy for my needs or at least I am convincing myself of that. Thanks guys. I can always look to you guys for info I cannot find elsewhere.

Looking for a cash price. I may sell my 2538 or at least would like to know what I need to get out of it to better my deal. My dealer wants 17200 plus my 2538 with 200 hours. He is giving me 16500 for it. I may be able to sell it and lower the selling price of the 2555 hopefully. Thanks guys.

The thought is there to trade my open station for a cabbed tractor. I do stone driveways and some tilling and some snow blowing and some lawn installation and you get the idea. I am wondering if I really want to trade. I think I do but looking to see if anyone had regrets.

Seem like the lever for my 3 point hitch is working harder than is use to. I have oiled everything I can see that moves. I see no grease fitting with these old eyes. I would imagine there is a nut that sets the tension on the lever? Is there a grease fitting I am not seeing? Thanks

Was at my dealer today getting cruise put on my 2538 and asked for a price trading in a non cab 2538 toward a cabbed 2555. Diff. was 17200. That is giving me 16500 for my tractor. I is about the ball park I figured and I will not be doing it but just letting folks know what I got for a price.

I got hit in the head pretty good this week doing some work in the woods. Never saw the branch coming. I now have a wild hair that thinks I may need a tractor with a cab. I think a cab would hinder me at times but I do think safety could be better with one. I have researched the 2555 and the...

Yesterday I was working my 2538 pretty hard pulling out some of the toughest brush ever. I was lifting with a chain on the bucket lifting all it could lift. I had my box blade on and loaded tires. The tractor could not spin. I ran out of power. I would think this is pretty normal. My question is...

Looking at a new grease coupler I have never seen. I don't pay much attention to reviews I prefer to ask guys who have similar uses as me. Here is a link to it LockNLube(R) Grease Coupler | LockNLube(R) - LOCKNLUBE

I moved into a 4 acre parcel today that an older lady wants cleared and seeded. Trees have been removed but some remains are still there. Grass has grown upward of a foot and thick in spots. I am wondering how a tiller will do in this type of condition. My box blade and york rake are very slow...

Been blowing a lot of snow yesterday and today and when I let the tractor cool down and walk away for a few minutes leaving the tractor running it wants to skip when starting back to blowing. It will blow smoke and skip for probably 20-30 seconds. Fresh fuel with additive above freezing. No...

My Landpride 1064 snowblower has a pin in the driveline after the gearbox and one on the pto shaft. I have to replace the pto shaft and wondering if I really need to get a shaft with a shear pin? Much tougher to find locally. I have broken the other shear pin before but never the one on the pto...

Looking at pto shafts for my landpride 64 inch snowblower. I have a Mahindra 2538 with 32 pto hp. Looks like I can find many shafts with a tier rating of 4 that can handle 38 or so hp. I have also seen the tier 5 which is very heavy and more money. Now this is not a continuous operating type of...

Local auction has a used John Deere 25A flail mower in it. Took a very quick peek at it today but was raining a monsoon. Looks like all the knives were in very good shape. Place selling it says they have used it to mow around the buildings there for a while and it works fine. It has some age to...

My 2538 seems to lift very well but after reading everyone test hydraulic pressure I am thinking maybe I want to get in on it. What if it does not lift all that it could? Seems strong. Anyone know what coupler this thing takes. The local runnings store has the gauge just need to put it together...

Hope to pick up an attachment new or used during the winter months to hire out with in the spring. I really like the thought of the flail mower but speed concerns me. The brush hog mower is much more readily available around here and used much more. The tiller looks like something I could use...

I need a shaft splined on each end about 40 inches long closed that will handle 35 hp. Where should I look for one?

My neighbor has a 2005 Simplicity XL Legacy small tractor. Nice little tractor. He is looking for a blower for it. He said a local dealer told him Simplicity only. This is a shaft drive blower. The blower is 3k with no used ones around here. Anyone know of any other blowers that fit it?

Always looking for implements that I can make money with. I have a chance to purchase a used bush hog rd6 in nice shape for 800. I have read it can mow a sapling of one inch. I always keep an eye open for a brush hog but nothing so far. Which one would get the most use for hiring out? I have...

Looking at a 72 inch and wondering how you like yours?

I have my search for a 72 inch tiller narrowed down to the Mahindra or the King Kutter. I would like to only discuss these two as my pic will be one of them. We all know the King Kutter. I can get it for 1899 local. The Mahindra (Kodiak) is at my Mahindra dealer. His price is 2399 with no...

Stopped at my dealer today and picked up an oil filter and was surprised to find he did not carry synthetic oil for the engine. I bought the filter and intend to switch over to Rotella. While I was there he told me of a reflash for my tractor. Said it does a few things and may add a small amount...

Thinking about getting a gauge and checking my hydraulic pressures but do not know what quick connectors will fit my tractor. Could call me dealer but figured you guys would know right off the top of your head. Thanks

This Sat. there is an auction with two new 82 inch gear drive tillers. Cannot tell the brand but look orange. That is all I know. I think 82 inch is too big for my 2538 so at this point I see no need for me to go to the auction. What do you guys think?

Got my tractor about a month ago and have been advertising to see if I could make a few bucks on the side with it. Why not? Finally got a call and went and looked at the project. Not very big and had recently been cleared. I figure I could be done in an hour. The drive is 45 minutes each way. I...

Looking at 5k 20' Equipment trailers with a top rail and hd rear gate. So far the Sur-Trac looks like the best fit and finish. I do not like the cross members on 24" but all dealers are telling me that it is just me. The Cross Country is very nice with cross members on 16" but does not look like...

Going out looking at trailers in the next few days. I am pretty sure a 7k is borderline but hoping it will work. I have a new Mahindra 2538 which has a spec weight of around 32-3300 pounds. I have a 1000 pound loader on it and about 800 pounds in the rear tires. Anyone ever weigh a tractor to...

Looking into a set of rear pallet forks to move my pellets around but want to know if anyone has a 2538 that has actually lifted a ton on a pallet. I know the ratings but want to be sure before I buy forks that would only be used for that to find out it cannot do it. Thanks guys.

Have a new 2538 with forks for the front. Tractor is not rated to lift a ton and it cannot. The back is rated to be able to so I am thinking about a set of rear forks for it. Any recommendations that can lift a ton? Put a quick hitch type setup on and use my front forks? More money for the quick...

Tractor does everything I hoped it would. I have 25 hours on already and no real complaints. Tractor is a work horse for me. I got it with some implements and will be out to the Empire Farm days next week looking for a nice 3pt pallet fork setup. Need to be able to lift a ton of pellets and I...

Loving my new 2538 but when moving and doing very little the tractor seems like it is hitting the governor on and off. It sounds great at first but after a while makes me wonder if they all do this? Kind of like running pretty fast across a hay lot and it gets bouncing. Not drastic by any means...

Looking to see if any of you folks have a good idea for a tool box for my new 2538? It would be nice to be able to have a couple of straps with the tractor at all times. Then I need to look into the cup holder :)

New 2538hst got delivered today with fel and some other stuff. Nice tractor so far. Quite a step up from my Yanmar sc2400. Put about 4 hours on today and really liked the tractor.

I have looked online at Wolverine and they say the pan needs to be flat. I cannot find a very large flat spot. Tractor is a 2012 Yanmar sc2400. I am certain someone out there is using one but want to know what? Thanks

Wondering what you folks have found to be the best parts cleaner. I have tried quite a few along with diesel fuel and have not been impressed by any so far. I work in an attached garage so smell is a concern. Thanks.

Just purchased my 1064 and wanted electronics on it but it was priced at 500 so I passed. I am looking at linear actuators online for the flap but looking for some ideas for chute rotation. I have seen that some folks have used a power window motor but have not looked into it yet. Is there...

Purchased a new Land Pride 1064 snowblower today at the Empire Farm Days. They said cost was 500 on an electric chute setup. Not worth that to me. What have you guys used? I have heard rumors of car window motors? I pick it up Thurs. or Friday and will start pondering what I can do with it next...

Was snowblower shopping today again. Found a left over 2011 Bervac for 2350 and a new leftover from last year Landpride for 2700. The landpride looks new the Bervac looks a little less new. Both are very nice. Both have manual controls. Which one would you purchase and why?

When farming we turned the fuel pump up on each one of our tractors. Each one had quite a bit available to us with a turn of a screw. Do these little tractors have the same? I have 16.5 hp but is 18 or 19 readily available? Certainly don't want to hurt my tractor or make it smoke like a super...

I will be having to snowblow around a few trailers this winter. I don't think I want to weld a ball into the fel and don't think I want to cut a hole into it to bolt one in. What have you guys done to just grab a trailer and go?

I will be going to the Empire farm days this coming week to look at snowblowers. I am in the market for a 60 inch 3 point hitch snowblower. I know most folks are happy with the blower they purchased but I want to know what made that one stand out to you? What did you compare it to? So far I have...

Found a used Puma 60 inch today for 1500. Says it is about 8 years old and in good shape. I will probably go look at it. For 2100 I can have a new Woodmaxx and add the electronic controls for an additional 350.Tough decision. Any thoughts?

Hi guys, First post. Purchased a used 2012 sc2400 last week with only 32 hours on it. Came with the fel. Thinking I am going to load the rear tires. Looking into rear snowblowers right now. Thinking in the 60 inch range. I have 24 hp at the motor and 16.5 at the pto. I see many other tractors...