Search results

Hello, it is January 8th here in central California and the grass and weeds are starting to grow, this in my first time using a disc, I disced the field length wise and then a second pass vertical, I'm wondering why there is such deep grooves 12" deep and then shallow groves, is this normal for...

Hi, just trying to select the proper size disc harrow and wanted to know if anyone with a JD2032R knows what size is best for this tractor, it has 32.5 engine hp, weight 1973 lbs + loaded tires. I am interested in the Dirt Dog 100-6, they say the 100 series is rated to 35hp and weighs 474 lbs...

This is a TSC single row cultivator made by Behlen Country, I called Behlen today and asked if I could put sweeps on their cultivator and they said no. The spacing between the C shanks is 10", the dirt is really soft and I am just wanting to have more coverage for weed control, not looking to...

I have under ten hours on this new tiller and I have an oil leak, I was able to tighten the bolts up about 1/8" turn and I will keep an eye on it to see if it stops. Is this kind of leak common on new implements. I'm guessing there must be a paper gasket between the two parts.

What implement would work best? I have five acres of weeds that are mostly foxtails, I tried flail mowing them but of course in no time they grow back, the ground squirrels dig up mounds and impedes the progress of flail mowing, I tried my tiller and that is way to slow for five acres. I have...

I notice when my tiller is hooked up to my quick hitch there is a lot of free play at the connection points and when the tiller starts bucking it slams back and forth beating the heck out of the QH. And I find the same is true for other implements that are attached using the QH. When an...

I just did my 50 hour service on my JD 2032R, I cleaned the transmission screen and the magnets as per the manual, after I installed the new transmission filter and finished the 50 hour service and was cleaning up, I noticed the same type of magnets inside the old trans filter but did not see...

I cannot afford hydraulic TNT at the moment so I made a lever out of a chain binder to adjust my top link from the operators seat. I took a 5/16" - 3/8" ratchet binder and used the parts from it to fabricate my top link. Cut off the plastic grip with a razor knife and you will notice that...

Hello TBN members, need some advice. Owners of box blades: How straight, flat, or parallel do you expect your blades to be. I bought a new box blade and when I bolted the blades to the box they have a curve to them along the length, if I was to hold a level on the bottom of the blade it is...

When you have a FEL on your tractor is there any advantages or disadvantages when using 3pt implements. When should you remove your FEL, and when should you leave it on.

I was greasing the front axle on my JD2032R and noticed this shim and it looks out of place.

My service manual says 2025R & 2032R, does anyone know why I don't have as many adjusting holes as the manual says?

I have this dirt road that is elevated above my house that is 15' wide and 660' long and I am being dusted out by every vehicle that drives on it, I am looking for a permanent fix or long lasting solution and I can't afford asphalt or concrete. I live in a agricultural part of California and...

I have a hydraulic leak and it appears to be wet at the connection or to the right of the connection, any tips to fixing it, I know if it's a threaded connection you take it apart and put more Teflon tape on, but what if it's the fitting. The lines above are dry both directions.

Hello JD owners, this is my first tractor I've owned with a hydrostatic transmission and need some advice. How do you know what is the correct RPM to select without wasting fuel or under powering the engine. The gauge says rated 2500 RPM. does this mean that any time you are using a PTO...

A warning to everyone, I just bought an Ansung Tiller ER062, there website says it weighs 656lb, when you read the manual it says it weighs 540lb, the dealer I bought it from told me it weighed 656lb. I called Ansung and the lady office manger told me they have not updated their web site yet...

I can't make up my mind between the Sicma T5-60 made in Italy or the Ansung yjco62 made in Korea tillers. I have a JD2032R, tractor hp 31.7, PTO hp 23.5, tire width is 55". I will be tilling three acres of soft decomposed granite, after it rains you can dig it with a spoon and it's not very...

Does someone make a 3pt attachments to grind up tumbleweeds or bulky brush, most wood chippers do not have a large enough opening for bulky brush, what I was thinking is an attachment that is shaped like a big funnel say five feet in diameter in an upright position that was self feeding, that...

Do you ever wonder what is the deal with a one, two, or three year warranty on products that should last 20, 30, 40, years or in some cases a lifetime(except for wear items). These manufacturers put out all types of advertising boasting about the quality of their products they produce and then...

Well, I'm going to pull the trigger on a 2016 2032R with 34 hours, anything I should be cautious of, any horror stories on this model, any last minute advice before my $20,000 goes bye bye.

Hello, no one likes surprises after a purchase, I bought a ski boat and to my surprise i receive a bill each year for a luxury tax and other state taxes and of course the crooked salesman is not going to tell you about these things. I live in California, is there any hidden fees for owning a...