Search results

Adjusting shuttle response not on top dial rabbit and tortoise but the 3 adjustment knobs below, i cant get the response i want with the top adjustment knob and wanted to see if anyone knows the procedure to decrease the slamming into gear as you move from reverse to forward Top knob all the way...

I have a 2022 Mahindra 2660 built by TYM with one rear remote and i would like to add another to have two remotes anyone have any idea where i could try to find the factory type remotes for a cab tractor. Wondering if maybe TYM might fit. I have tried on google nothing so far in stock.

You would think removing pin from the draw bar would be simple but not the case on my new to me 555 the pin is spring loaded but i cant figure out how to remove it and i will have to remove it in order to change the fluid in the rear end. Any ideas ?

Can anyone tell me what hydraulic fluid to use in a Farmtrac 555.

Just noticed CD for sale on Ebay for Branson service repair maintenance manual , check them out.

I have been researching the large Kukje engine because i really like the features on it, ran across this guys write up on the Kukje engine it is pretty long but it will give you a lot of good info on it and other engines. Kukje vs Everybody | United Truck Sales | Clinton Township Michigan

Buddy seat on ebay, these things are not cheap. A lot of guys has posted about wanting one. LS Tractor MT573C Buddy Seat Kit A-STJ1 | eBay

Where can i find a 2016 Boomer 37 owner manual , looking for a neighbor. Thanks in advance. Walt

Where can i find a 2016 Boomer 16 owner manual , looking for a neighbor. Thanks in advance.

Found this statement from a Ok dealer post on The facebook LS site. This is good news. Christian Wright commented on Joel Rogers's post:"Update, I am trying to get ahold of Mr. Rogers today, however this is what I have learned. In the past I have had to fight with LS in regards to ECU's and...

Well guys i have been bitching about having to set on my tractor with it idling from 3 to 5 min to cool the turbo down after using it hard. My son got tird of hearing me complaining and built me a timer. Bought The timer from Documentation , this is a programable timer and good for 5A and that...

The TYM T474 cab tractor at Smiths enterprise looks real attractive, 48.3 HP with an Kukje 4 cyl engine and a shuttle cab tractor with a trailer for $27,777 or 25,277 w/o trailer without haggling. I love the Kukje engine its a 4 cyl without a turbo, the turbo is kinda a pain in the putute to me...

Does anyone know where on the net i can get a copy of the 7 yr warenty?

I am not connected with BESTCO in any way except as a customer but BESTCO has super sale on back hoes . The FH-BH6 back hoe with faded paint in on sale, original price was $4072. 7 left at $2999. And free ship. These Back hoes have a self contained hyd system and are driven with pto driving the...

My LL3112 loader bucket cylinder will go out all the way but wont come in all the way it likes about 4 inches, i thought i might have bent one of the cyl but removed the lines and they will collapse all the way then thought the rear 3 point might be to high lowered it still no go. I guess it...

My god i wonder who put these filters on , i have never had a filter that hard to remove in my 82 yrs. He must be kin to Atlas I had to drive a large screwdriver through the hydro filter after i could not move it any other way and it is hot out there. I did rig up my shop vac and didn't loose...

It was a easy install of the 4 remotes with the Utube but i had to remove the single set (2) that was installed when i bought the tractor last year. I now need 4 remotes for the grapple and i have a ditch flail mower that will need 2 sets to operate. I do have the single (2) if anyone is...

Found this link and found it interesting how similar the different brands of diesel oil are. In my diesel equipment i have mostly used Chevron Dello 15/40 (i worked for Chevron 35 yrs) Shell Rotella 15/40 , Mobil Delvac 15/40...

While greasing my FEL for the first time i had one zert fitting that i could not lock my grease gun onto (it a 10mm zert) tried to remove the zert to replace it but the 10 mm socket cant grab the zert so i decided to check the other zerts same problem so i will have to knock the head off any...

Just a heads up on what i think is a good 12 volt pump for a good price. Ater years of using a hand pump on a 55 gal drum i finaly decided to get a 110 v electric or 12 volt pump due to my advance age, i found this 12 v pump on Ebay and decided to take a chance and wanted to let those that are...

My 06 Fotan FT404 4cyl is still running strong, only trouble is the hour meter quit after the 2 year and recently the rubber diesel ruturn lines started leaking and i replaced, the PTO was almost impossible to get in gear a few yrs ago and i found out it was a loose bolt on the lever next to the...

Looking at the two tracters , everything is the same except the front loader and the HP rating although both has the same engine and this engine is used all the way to the 55 hp probably a beafed up drive train on the 45 hp and up but the XG 3135 and XG3140 same chassis tires ect. It is just a...

Struggles with our new LS XG3135 When trying to hook my 6 ft finish mower to the 3135 PTO it was a struggle as it seams impossible to rotate the PTO shaft of the tractor with the PTO switch on and off with the key on or off but was able to get a pry bar and rotate the mower shaft to hook up whee...

New owner of a LS XG3135, traded in my Mahindra 3016 . Had a rear remote install to use on a hydrolic top link, it is real handy when using garden equipment like a double disk, tiller ect and another handle to be installed on the right fender it came with one on the left but not one on the...

My 3016 wont go into positive traction, does anyone have the adjustment procedure? Walt

Need to check the valve gap on my 3016 S3L2 28 hp Mitsubishi engine, I did a search but could not find the procedure posted if anyone has it I would appreciate a copy of the procedure. Thanks Walt

I purchased a used Mahandra 2013 3016 hydro W/FEL Tractor and no manuals came with it, I was able to download the user and operator manuals but it don't give me the engine oil and hydronic filter # or the procedure for changing the hydro filter. On my Kubota if I don't jack one side up when I...

Guys a new owner of a L4310 and having a lift problems, the lift is strong and holds good but it only goes all the way up or all the way down no in between. I have changed the Hyd filter. I did a search but could not find a thread with this problem, I have used multi settings on the knob under...

The PTO is stuck in the low speed position and the shift leaver will not move on my Foton 404, I have had the tractor going on 7 yrs trouble free and would appreciate any advice on where to start on correcting the problem. Walt

Does anyone have a cross for a Foton CX7065 Fuel Filter for a FT404. Walter

I have used the tractor with a disk, scoop, box blade, Log tongs on a bar and post hole digger for 10+ hrs so far. The tractor is brute strong, starts easy even on cold mornings easy to drive and comfortable, most of the controls are well placed for me with the exception of the left brake, it...

Does anyone have any info on the Spirit Loader. Good or Bad. Thanks Walter

The book on the Foton 404 for engine C490BT shows oil cap at 6 L or 6.3 Qts. When I changed the oil on my tractor it took 9 Qts to get to just below the full mark. Anyone know what the capacity should be. Walter

Does anyone know anything about the LD200C Front End Loader, they are on E bay at a good price. Walt