Search results

I'm looking at building a 26-28' lowboy gooseneck trailer and have never seen a kneeling gooseneck, originally I wanted tilt deck but that has its drawbacks and a fixed deck with air suspension would allow it to drop to loading level without steepness of a tilt and load multiple items more...

I purchased a tractor today DOA, it won't start and the PO seemed to indicate it ran great then it didn't run at all. I have hopen that it is something simple. I haven't been able to verify GP functionality, but it is a warm day and my Vxx03 series engines fire right up even with thousands of...

I've seen rustoleum and paint in tractor supply in kubota orange, I wondered if anyone has experience with these long term, I'd like to avoid paints that will oxadize and become chalky.

I found a tractor with a bad v1702 engine and v2203s from refers are fairly common here, I wondered if the basic structure is the same and if it would bolt in place.

I recently purchaced an unused 71854 chipper from a private party and since I will have brush to chip I am interested in the hydraulic feed option, but I can't find it listed, the part number I have is 71374, perhaps it has changed? Im not ready to buy, just ready to set my budget.

I was having some issues with my mid 90s landini crawler and found uppon inspection the transmission / hydraulic oil to be an unconventional color, either prior owner used mayonnaise or there is H2O in the case, I'm guessing #2 is more likely. I'm not sure how it made its way in, but I'm...

I have been offered a 1510 with a bad head gasket, how difficult is it to get parts for these tractors? How are the prices?

I'm looking for a small tractor to do detail work around the house and in areas that my 6' wide tractor with a big-arse gets in the way FEL is difficult to access, an Iseki 1510 was offered to me with these details: BAD HEAD GASKET (I can fix this myself) Seller says 4x4, I will check, it does...

About 2.5 years ago I purchased a brand new SQ720 and used the snot out of it, today it froze up, and I discovered that the gear box never had oil in it! I expected that the dealer would take care of this in pre purchase prep, but I guess they overlooked it! I sent them a note asking about it...

I'm confused, I had it idling and jumped back on, then it died, tried to restart and nothing, I can get it to crank by jumping the starter, but it won't fire, the mid PTO light is on, but this tractor is not equipped with a mid PTO :confused: and I can't find any harmed wires, any ideas?

I'm trying to decide between the 5' and the 6' models, and at the inflated California price I can't just get the 6' and not worry about the difference. I have 32hp at the PTO, the 6' is rated for 35 minimum, it is also $300 more than the 5', but the 5' won't quite cover my tracks, 2.5" on each...

I'm looking to buy a tiller NOW, I could swear I was quoted $1599 a month ago, but I looked today and the website said $1699 :confused: can anyone confirm that this jump really hapened?

:confused: Aparently the guys in "hydraulics" don't know :eek: I already have the Kubota valves mounted and ready to go, but opted to avoid the absurdly overpriced name on the Kubota cylinders, can someone point me in the right direction? I don't need any gimickey extra valves, just the...

I already have the rear remotes, but chose to not pay Kubota extra for their name on the cylinders, I just need new cylinders and hoses, no extra valving.

I just thought I'd pass this tidbit on, I was in TSC yesterday, an hour and fifteen minute drive on a fast day, but a friend was headed near by, so we checked it out and I looked at my future new rototiller, but then I saw it, a Caroni TM1900 flail mower! I asked and the salesman said that they...

I just got my Cutmaster 52 :D and I was looking at the prices of CNC table kits :eek: there really isn't much to them for the $5-10k that they want, has anyone made one at home? Being in N. California, my generator is about out of gas, so I'll search later, power comes back on some time next...

I can't seem to find anything in my searches, so I'll ask, I was thinking of something on a trailer run off a small engine, 5-10hp, to keep the tractor open for other use, possibly with an auger in the bottom to agitate set up and built in such a way that it could be filled with the front...

I'm looking for a small used machine to produce square bales in what is the standard sized square arround here, about 1' x 1.5' x 2.5', inexpensive, and functional, older is fine, pulled by a 2006 Kubota L3830, but I don't even know where to start looking, can someone offer some help?

Hey, I bought my L3830 last december, sometimes I get bored and randomly flip cars in the back yard, does anyone else have this problem? Is there help availible for me? Or the tractor? On a side note, it does make working on the underside quite easy, although a little hard on the side sheet...

I'm considering this and a befco, I would likley already own the CCM if it wasn't for the price of shiping, so before I decide what to buy I'd like to look at one of each.

Before I head in to get a quote at the nearest dealer 2 towns away I'd like to have an idea of what I should expect to pay, has anyone priced them out or purchaced one latley? Thanks!

I started thinking of a seeder and soon enough found some old JD 71s for $200 a pop, not pretty, but with a parts diagram I'm sure that I could put 3 or 4 together, they didn't look beat, just used. How does that price sound? Some searching indicated that they were a high end seeder when they...

I have the beast home and the time to choose a tiller is coming, I don't like the KingKutter's inexpensive design since I might use it for light comercial work, I have looked at the CCM MR-175/190 tillers (66", 72") and need at least 66" to cover my tracks, I'm interested in the beefiest and...

While I look arround at many of these trees that are so rude as to fall in places that I don't want to chop them up, I'm thinking of a 3 point mounted hydraulic grapel, back up to the log, lower the 3 point, close jaws, raise 3 point, drag to convinent location, drop, return for more :D...

Grandpa (8N) has been talking to the new stud in the barn and thinks he should take a new bride (B7800) and get down to the buisness of having a little rascal (BX23) but the new stud wants nothing to do with this, the old junk shed/barn that the illegals left fell down under his command, then...

I'm debating the $6k purchace of an engine driven welder and big-ish plasma cuter for a few projects, I'd like to know what you have paid per pound for steel recently, I'm thinking of building a dump trailer and a heavy duty flatbed :D along with some implements...

Has anyone purchaced these valves, or can a dealer here sell them to me? I got a gearmore TNT and the valve location is going to drive me NUTS! :mad:

:D Signed on the bottom line today for delivery in early January, GST, SQ72 bush hog, Gearmore HD 66" box scraper & TNT, Skidsteer quick connect, HD bucket, and cutting edge :p :p :cool: :D

Does anyone have curnt list prices? Found this, but it is 2003 material :( http://www.dot.state.mn.us/equipment/contracts/tr_cpt_utl/42.pdf

Are there any dealers that sell add ons such as creeper gears, hydraulic valves, mid PTO, ect mail order? I'm trying to keep initial prise on the same planet that I live on!

The more I read the more I wonder what to go with... On the GST how/where is foreward/reverse controlled? Also, can anyone point to the price differences/jumps between transmissions? Thirdly, is the GST a electro hydraulicaly controlled planatary gear type transmission like an automotive...

I did the math and CA sales tax will run $1200-1500, fuel to drive to OR $150-300, so I am considering an out of state purchace, I already have a trailer and promised my cousin that I'd visit this winter :) I have a list of dealers, but none of their websites have any prices or indicate that...

Just wondering, do they look for proof of income? I have a good credit score, but am self employed and don't have proof of income, and didn't make much the last couple years because I didn't want to look for work :)

Location- Napa CA, north of SF I'm sorting through all the information and becoming confused, who sells who's equipment, multiple brands selling the same thing for different prices, I can save $461 buying a king cutter tg-60 from northern tool instead of a gearmore e60, but specs and pictures...

I've been searching the forum for the last day or so, as well as a few other places, I was quoted $18,500 with ag tires and FST transmission, I was expecting something a bit less since I was told that I could expect to save $2,500-3,500 on a harvest rental return. Also, salesman said that the...