Search results

Am I crazy for thinking I'll be fine wearing a motorcycle helmet while using this on the front of my mx 5200? We have the 6' wide version and a pto hydraulic pump and typically I use it with a cab tractor... But motorcycle helmet and maybe a heavy chest rig set up and I feel like this would be...

Hello. I'm looking to put a needle flow control in the line going to my loader. Kubota MX5200 with LA1065 loader. My thoughts are to go with a 3/4" valve for the purpose of throttling the speed of loader functions way down when me or the mrs's needs to be in a basket on the forks to reach high...

It seems like people had a source for these back years ago when I joined. I need to replace my fluid. I'm a few hours past the recommended swap range on my MX5200.

If i lower the rippers and tear up the land that is plagued with privet and woody shrubs, I can remove most of the shrubs and within a few weeks the field will look great and grassy. Is there an implement or technique that works better than what I'm currently doing? Does a disc harrow do this...

Stuff been inflated. Glad I bought it when I did. My paycheck hasn't had that affliction of inflation added to it.

Who made it? The tag is faded.

I'm looking for a gas dually for farm use and occasional towing (tractors, excavators, skid steers, lawn mowers) around a slightly hilly 25 mile radius between several properties, the family farm, and my new house and property. I'm not impressed at all with the offerings from the big three. Let...

there are only three tractors on the local lot and this is what the lugs look like on one of them:

I'm sure it's normal, but I'm asking how is this accomplished. Surely there isn't a syncronizer ring is there? I can be moving and shift in and out very easily. Why is this?

Oxy/Acetylene. I've got plenty of experience heating and bending smaller steel, but this is a piece of 1" thick about 4" long in cross section and I can't put enough heat into it with a #2 cutting tip to get it glowing orange all the way around so I can bend it with a pipe wrench. Does anyone...

Here is a close up and a pan out view of the area: There was a pin hole in the rubber hose that was clamped to some device. What is this? It was a diesel fuel something rather.

So I have a Kubota MX5200 with the rear tires on the widest recommended setting and I spent quite a while trying to decide on a 72", 78" or 84" box blade. I'm so glad that I ended up with an 84". Any smaller would have been a mistake. Now I'm making ditches and leveling/grading roads with my...

I have a mountain, with twisty mountain roads going up and down and winding all around, 128 acres of land my wife bought. I'm wondering if mounting an oversized level like this; Would maybe help me figure out how to grade out all the roads for water run off. The roads aren't flat at all and...

So I've got a 160hrs on my mx5200 in the last 10 months, and I've never seen what I saw yesterday. I noticed while looking at the loader cylinders, it appears as though the plastic cap was left in place as the fitting was screwed into the cylinder. This looks to have happened on two ports, one...

I'm getting a ton of conflicting info from the threads that I've searched, the dealers that I've talked to, and my research. The threads and the dealers seem to suggest that I need L8304 & MX8452. I've had that quoted at $253+$244 for a total of $497 + shipping. The dealers could not tell me if...

So I've seen no shortage of high dollar expensive chainsaw scabbards. Here is my solution. I use my bike rack that fits into a 2" receiver, which also doubles as my weed wacker holder when I'm driving around or in my tractor, and I bolt on a piece of pressure treated lumber that I've made a bore...

We had a water problem and water was flowing down the drive when it rained. That has been taken care of with a culvert. Now we have pooling in the tire tracks. We can't even think of driving on it when it's wet because the tires will sink down badly and rut up deeply into the clay soil. What has...

I put 8 quarts in and it is at the top of the dipstick full level. My manual says it holds 10 quarts. I changed the filter also. This has to be a typo in the manual. What are your experiences with the 5200 or the 5800?

Okay, I am putting in a hydraulic top link and I will be mainly using the rear of the tractor for bush hogging and box blading. I put a hydraulic remote in place when I bought the tractor new because it would give me options. I didn't specifically ask for a spring centered valve, but it seems...

It looks proper to me, but I don't have the knowledge or experience to know. The price is good on this bb but I don't want a flat bar for a blade, like I'm told the less expensive ones come with. It's a Lowery branded unit made in Boaz Alabama. It looks great to me. Is there anything to be...

I bought these pipe brackets at McMaster Carr To mount this box right here: I've looked at a great many places trying to find a good spot, and I think this looks good and is convenient.

Dealer installed third function for grapple but it doesn't work with curl simultaneously, only by itself or with lift. Is this a characteristic of the valve, the installation, the tractor, or something that I'm not listing? Just trying to understand "why".

So I have a new mx5200 with filled tires and 100lb wheel weights on each rear wheel. I will be using the weight for a small profile counterbalance for mainly gravel and clay dirt fel counterbalance. My initial idea was to put as much scrap metal in the 55 gallon drum as I could fit, and then...

Dealer couldn't tell me either. The MX5200's on his lot had the 14.9x26's...mine came with 13.6x28. I don't understand why there would be two completely different sizes of ag tires. Dealer couldn't say why.

Watched a Youtube and the owner says he thinks this sucks but it's just part of Kubota tractor ownership. Now tell the truth. Is there ever oil coming from the rear end or transmission of a new kubota with a hydrostat? I bought a brand new car one time and it's transmission was covered in oil...

Please. What is fundamentally different? I haven't figured it out yet from looking at the brochures and there are none on the lot to look at. I'm really trying to understand what the differences between the DK4710SE and the NX4510 (both in Hydrostatic transmission) are. Thanks

I can't find this online anywhere and i dont have a dealer close to look at them. Do they use bevel gears to turn and transmit power simultaneously?

Tractor sizing and comparison and choices...Help me choose- UPDATED wtith Land Pic So I've made a matrix to identify important parameters and characteristics of potential tractors. I'm looking at models in the 45-50HP range specifically, but I've included some above and below that threshold...