Search results

My dk40 hst peddle seemed hard to push, I then noticed a dash light that isn’t in the manual. It shows a tractor with a paddle lock underneath it with an arrow going forward. When I push the brake on, the light goes off and peddle is easy to push, when I release pressure on brake, light comes...

Looks like I have a broken cable or connection to the joystick cable running to the loader valve. The raise/lower suddenly went limp. The balls (steel) appear to be fine, but there’s no pressure on the one that goes to the up/down. To get to the bolts to remove the joystick housing it...

My 2014 dk40 started leaking hydraulic fluid underneath the trans area. The independent tractor repair (heavy equipment too) facility split the tractor, found the seal or gasket that was the problem. They called me because they are having a problem getting a “parts breakdown” from the Kioti...

Could be very dangerous

It looks like two "thumbs up" facing in. I looked in my owners manual and don't see it in there. I'll try to load a picture.

Most, if not every deck over I see are only rated for 10k pounds?

http://youtu.be/9FEaEHXWWw4

Not that I need another one but this has hydraulic scarifiers. I offered $750. Is the a 3k plus box blade?

I believe the model is 72" cyclone, it has captured pins and just a ton of metal around it. The gear box looks a little different from most other rotary cutters I've seen. I hear rhino/ Servis is a good brand. But I'm worried it may be a little to much. I do have a loader for counter weight...

Both look to be in similar condition. The md has captured pins for the 3 point . The bb72 does not, although the newer bb72x does. The md looks a little beefier, but from reading here the gear box is far more important. The md is $1000 the bb72 is $1400.

6'4"x10 galvanized. Radial tires with hydrogen. Gate folds flat into bed and is removed easily, spring assist. 4 d rings, sealed wiring. I purchased it from RP carriages in Seneca il. Extremely nice people (and knowledgable) to deal with

Get one that hangs off the side of the bucket!! Lol. It worked pretty good considering all the pit run (round Potato sized rocks). I borrowed it from a buddy who uses it on a good sized new holland skid steer. So the hydraulic flow/ pressure was probably not ideal for my 11.9 gpm on my dk40. I...

Last time I was at my property I noticed that my dk40 was creeping backwards. It had never done this before. I have put 3 hours on it since the 50 hour fluids change. I topped off the hydro fluid because it was barely on the dip stick. It's still very hard to see (clear). Would an over filled...

Our family's (sibling) need a new pressure washer for a summer place so own. We need it to clean skim off the pontoon at the end of the season, clean off my tractor, we also have an exmark zero turn mower, concrete patio and probably many other things. We would like to stay around $300-$400.

I started with the hydraulic system. The fluid that came out of the two rear drains was pretty clean. The center drain plug had a magnet on the plug and as others have said, it had a few metal shavings and fine metal on it. Now the filter! Thanks to others here, I had purchased a chain wrench...

I had it installed when I purchased the tractor just in case I needed it. Today i took a7-way to 4 flat adapter out of my truck and attempted to push it into the Kioti plug. No go, not even close. Does anyone have any info on the plug they put on? There must be some sort of additional plug...

I was able to make the 2 1/2 hour drive and pick up this Gannon rollover. It's about 6 ft total lenght. Last year I settled for a gill sr20 that has spring loaded scarfiers that fold down and a swinging back gate. It was (is) very nice but I always wanted a rollover. I probably will keep one of...

I just turned 16 hours on my dk40hst. I trailered it to another property, attatched my 7' frontier finish mower and started cutting some grass. I noticed the rpms dropping off, I slowed down to let it catch up but couldn't get the rpms past 2200. It seemed to smoke a little too. I shut it down...

Does anybody have some useful info on this rotary mower. I've seRched here but haven't found. It's 72", my dk40 should pull it fine. I've read about gearbox problems on some woods mowers. For some reason the picture didn't show a tail wheel on the one for sale.

No message

And had the second remote added, along with the trailer plug (for no reason, lol). My buddy welded on a couple bucket hooks and also welded a trailer hitch inside the top of the bucket. On my ck he welded it on top of the bucket, it was a bit to high. He also welded a 2" rectangular tube on the...

The ground near Chicago is a little hard this time of year!

Invention for chopping firewood. Invention for chopping firewood. [VIDEO]

My ck35 hst has 48 hours on it, 2 rear remotes, bucket hooks and a receiver for a hitch. I really like the tractor, it was a giant step up from my kubota b7100. That being said, I'll probably never be closer, dollars wise to upgrade to a dk40 hst. I would think I could find a dk40 (new) for a...

Yesterday I cut some grass and then box bladed a 50'x50' area. I was running late and had to park it. After parking it I noticed a few drops of hydro fluid coming from under the middle of the tractor. It's near where the front drive shaft leaves the transmission. It's coming thru a 1"-2" hole...

My buddy is general contracting a house and asked if my tractor could install a silt fence. I have a subsoiler and middle buster. Id like to try the subsoiler first because their would be no backfilling. Any other ideas?

This thing is built like a Sherman tank! Everything seems to work as it should. Besides a new steel rod for the handle and a 1" 1/4 pin that holds the scarifir bar to the box (and paint) its a perfect unmolested piece of art. Once I buy scarifirs it won't be quick hitch compatible. The...

It has a hinged rear blade. The scarifirs can all rotate down or up with a handle (needs to be welded). Did this pre date the "rollovers" that are made today? The scarifir slots all look to be in excellent condition as do the cutting edges on the blades. If (when) I buy this ill have to buy...

I picked this up for $1000 today out of a local website. Previous owner said he barely used it, been kept in the barn for most of its life. Was thinking of hauling my ck 35 with it but, unless I get brakes it probably would t be a good idea. Overall in looks like its well preserved, newer tires...

Their is on for sale an hour or so from my house with a rear blade, 900 hours, 3speed, hi/lo trans. 2wheel drive. It's an 18 horsepower diesel. I don't know the model number yet but, would like some info on Mitsibishi, parts, reliability, etc. do they still sell them in the states. Thanks

I picked up a cheap harbor freight toolbox that fit perfectly between the ROPS. I painted it and the removed the small factory toolbox. I also drilled holes in the bucket and mounted my toothbar.

Found a 60" toothbar off Craigslist today! The previous owner never put it on his tractor (a Kioti ck25).

I ordered a top and tilt setup from Brian (mountainview), who I believe is the owner of fitritehydraulics. It was delivered last week, just as he said it would. I opened the packages and installed it yesterday. First the packaging. The cylinders and hoses were encased in rigid foam...

I found a 6' super gill pulverizer this week not to far from my property. It's a little rusty but theirs a lot of steel on it. Can't ever see wearing it out.

I remember reading about certain brands of tractors not offering the float function on their rear remote setups. I just finished running hoses for a new grapple. I noticed that my Kioti does have the float position for one set of the remotes. The lever also goes back to the neutral position when...

I ran the hoses last week from the rear remotes to the fel. I thought I had the wrong Quick connects for the rear, but did get them to seat in the female end today. My lines are a little long but that's better than to short. I really don't like all the slop I have where the front connections...

My 3/8 lines and coupling arrived last week. Yesterday I ran them underneath the tractor and the followed the loader arms to the front. I then installed the skid steer type coupling on the front for the grapple. I then put the ag couplings on (Dixon QC ag4f4). I couldn't get the. Kipling to...

Their is one for sale on Craigslist Chicago. It's 84" which is to big for my ck35. Looks to be in good shape and is only $600.

The seller said it is actually a woods but the picture says frontier. He is selling his tractor and he will sell mower seperatly. He has a 45hp tractor. From the picture it looks like its in pretty good shape. He said its an "05" or 06.

I'm looking to buy a set of pallet forks(ssqa). I would also like to buy the quick spade from bucket solutions. The problem so far is that the pallet forks need to be almost right next to each other. The ones I've looked at say they adjust from 6"-44". Does anyone know where I can find a set for...

Some of the most knowledgeable posters here have said (Iand I believe them!). That weight and strength are very important on a box blade. I think the united bb's are to light( 4xx lbs). I saw this woods/gill on eBay but am concerned it may be to heavy. I've been told 800lbs. Would be perfect for...

I just left the dealer and left a $1000 deposit on a new 2011 ck35 hst. Loader, quick attatch bucket, suspension seat, r4's, grill guard and bucket hooks. They don't fill tires so I'll have look elsewhere for that. I may have them install remotes, $340 for one set, another $430 to turn it into...

Im meeting with a kioti salesmen tomorrow. If we can come to an agreement on a ck35 hst I just may buy it. The problem is at my property I only have a 24x24 covered pavilion, half of which is enclosed with a small kitchen and sitting area. The outdoor area has my boat (for the winter) and b7100...

Ive been quoted $15900 for a new 2011 ck 35 hst, $14500 for a 2012 ck 20 hst and $14700 for a 2012 ds3510 shuttle. Another out of state dealer has a ds 3510 for $1399.00. What mahindras compare to these kioti models? I think the ck20 is over priced compared to the other 2 models. Thanks for the...

I've looked at a 2004 lb1914 with loader and chipper (no need for chipper) with 200 hours. Two lk 3054's with loaders, one had a 5' bush hog (off brand). One had 850 hours the other was near 300. Both were in the 1990's. All of these tractors were around $7000. I didn't negotiate with the lb1914...

I would rather find something used to replace my B7100 with a tractor with a loader. I've looked at a used lb1910 in great shape for $7000, with a chipper (no need but I could sell it). A lk3054 with loader and a old bush hog for $7000, he said he will take $6500. Both tractors have low hours...

My buddy's f 250 is acting up again, He has had it since new. Now it's out of warranty and it's blowing black smoke at start up ( dealer replaced egr valve and put a fan kit on it last time). He is ready to install ( or remove) the "egr delete kit". The diesal shop he has it at seem pretty...

Their is a 2004 LB 1914 near me for sale. It would defiantly be a step up from my kubota hst b7100 (no loader). It also comes with a chipper that I probably wouldn't use much. It has 140 hours, owner selling because it is rarely used (really). I'm looking for some pros and cons of potentially...

Could someone tell methe differences between a ds and ck series tractors. Their is a 2004 lb 1914 for sale not far from me. I have a b7100 hst but no loader. This tractor has a loader, although from the pics, appears to be manual. Was their any issues with this model or things that may irritate...

37 hrs, 6 months old. $13,900 firm. Looks clean, sounds like a decent price.

I'm considering buying a 19' Mastercraft competition ski boat from Seattle if I can get a decent price to haul it. I have a bid listed on uship.com and have gotten a couple of bids. Unfortunantly they are more than I want to spend. I am hoping that a truck will be coming back east empty and...

I bought 4 gallons of dex 3 at Walmart last Sunday. Went home and proceeds to flush 2003 4x4 3/4 ton suburban by taking trans line off the cooler. Everything went well, I didn't worry with low reading on dip stick as I will keep checking and adding Daily until full. Test drove and shifted...

My b7100 started leaking oil Near front right tire (inside). It's a 4x4 and the newer style b7100. I don't have an owners manual yet ( I need one), could someone tell me the proper weight of the oil it takes? It's leaking below the axle on the hub (?) where 2 pieces join together. I'm assuming...

Asking for a friend who is looking at a L48 tlb in the mid $30's. I know bobcat comes with many more standard features than the big 3 but I figure the knowledge here could give him a more broad view of a reason to at least consider a bobcat over the kubota. Thank you for the replys

What other models trans would fit a b2150? Ita a 1991

I'm looking at a CC 2146 with a 14 up linamar motor with 200 hrs. Seems like a decent machine but would like some opinions from guys with more experiance tham me. It's a 2000 year model. Thank you for the replys!

I have a 1996 newer style b7100 hst. Which kubota model decks will work with my tractor? Will I need any other parts besides what comes with deck? Also did kubota put a cover over mid pto? Because I have what looks like a shaft that is capped. And a bolt thru my lever to prevent it from engaging...

Theirs a b2150 hst 4x4 with loader and bh for 4500$. Not sire of the hours looks used but not to bad. The bh is a faded yellow color not sure of the make. Just wondering if this is a good, bad or average price if it runs well. Thanks for all replys and any other info on b2150's.

Will a superior loader off a ford 600 work on a newer style b7100? It's for sale not far from me, he wants 1000$ with pump. I want to make sure it would work, at this time he isn't sure of model, just knows it came off his ford

Theirs a older b6100 for sale with a loader and bachoe. Would those attatchments fit my newer style ( 6 lug front rims) b7100 hst? thanks

I just recieved a new SS off ebay from Iowa. I asked salesman the distance between the bottom of the point and the 2 lower pins for the arms? he said it was 20 inches, I then measured my b7100 distance with arms up and had 24". So I ordered the SS thinking I had 4" of ground clearance when not...

should I buy a regular cat 1 size subsoiler or a smaller size like a xb model? I don't want to order it and then pay shipping if it doesn't fit. I'm worried that it may be to long to lift off the ground.

Ones for sale by me and was wondering if anyone here has any info on them? From the picture I saw it looks like it for a garden tractor , but it is a 3 point hitch. It grades rolls fertilizes etc. . Seller is asking 190.00 .

I just ran my b 7100 out of gas. I shut it off as soon as it started sputtering. Then i put some fuel in it. it wouldn't fire so I cracked open the fuel lines on top of motor and started cranking again put it still won't fire any suggestions.

Is it possible, A friend of mine has a old Bison gas tractor with a 5 foot bison loader,complete with sub frame. I am not that handy so I'm looking for some knowlege here. I know anythings possible but would it be practical to put a another brands loader on a kubota , specifically the bison on a...

I have a friend that has a Bison 2030 loader off a Bison Trac 650 gas tractor. It has been in a barn for over ten years, some surface rust on arms and cylinders. It has a five foot wide bucket. Could this be installed on my b7100 hst? I have never heard of a bison but it reminds me of a cub low...

I just got my harbor F. qh and tried to install a KK rake and it would not go on. I measured qh and it was 27.5", my woods mower and kk middlebuster will work with the adapter that I can't seem to order ( thats another story). I measured the the rake and it was over 28 inches wide. I just bought...

I have a b7100 with turfs 4x4 and no loader I think my tractor could handle a 4 footer. Does this seem like a good deal? shipping is 50.00 because i will pickup from his drop off. Or I could get a howse almost new for 275.00 off of craigs list.

I'm looking at purchasing a bb for my b7100 4x4 hst with turf tires. I am on info overload with all the posts especially by bob. wealth of info but not tractor specific. I have clay soil, and realize I may have to buy ag tires in addition to the bb. can you suggest the best for the money.

I am looking for a subsoiler or combo for a b7100 4x4. I don't want to buy one and get it home and not have it fit or not raise high enough. Does any one know which brand would fit a b7100 without alot of problems?