Search results

Can't figure out how to add an ad to the classified section so I will do it here. For Sale..... Took off the JD brand front and rear lights off my cab 3720 and converted to LED. No need for these anymore. Come with clipped off plugs but enough wire left to splice to your own harness. Also will...

I picked this mower up back in 08 or so and for some reason I have done nothing with it. Good thing it was free!!! I am having a real hard time locating a manual or even any info on this. The serial # plate is too beat up to get any info off it either. Brillion Mow-Sale 61" All bearings spin...

After nearly punching out a headlight and dropping chunks of snow on the hood I decided it was time to fix the bucket. After looking around here I found some great pics and info from 4shorts thread http://www.tractorbynet.com/forums/customization/130266-bucket-mod.html Thanks 4shorts...

Handy little info here to save ya some $$.... Couple days ago I snapped the chute control cable on my blower. Still not sure what happened. Might have been a rock or ice chunk in between the blower and the chute. Anyhow.... I ordered a new cable, (part #M84556), from Deere. $27.28. Got it...

Should have taken better pics but this is too simple to do. I had an old boat seat with a swivel base just sitting around so...... got to thinking how to adapt it to the JD seat. First up was pull the seat out (4 bolts and the safety switch wire), unbolt the slide rails from the bottom of the...

My 3720 reverse pedal started to stick and catch kinda. Has a squeeky sound with it too. Still works but requires a touch more pressure to move it. Forward pedal is fine:confused: Thawed the tractor out COMPLETELY last nite in the shop thinking maybe ice had built up somewhere on it, no luck...

Finally got a couple mods done that I wanted since last spring when I got this blower. 1st was some extension wings to increase the width and hopefully speed up the process. Started with 1/8" sheet metal, had my local shop bend it for me to create 3.5" more width per side. Cleaned up, painted...

For winter use I wanted to use the bb to pull snow away from the front of my garage door then use snowblower to huck it away. Well with the blade there was a chance the 1/4" side plates and the aggressive scraper blade would/could cause damage to the concrete and blacktop driveway, I built some...

Picked this up yesterday off CL for $325. 98% clean and strait. Need to straiten out a couple areas and maybe re-paint it. Not too bad in my book. Seller had bought it new in 83' I believe he said. Now if anyone could give me info on what style and length of shanks I need for it that would be...

A while back I asked about using a hyd ram to raise and lower the 7' bar on my mower, and well that turned out to be not a good idea. Thanks guys!!! My dad came up with a GENIUS idea to use a winch. So I picked up a wireless controlled Harbor Freight winch and welded the mounting plate to a...

This thread got me thinking...http://www.tractorbynet.com/forums/john-deere-owning-operating/173601-make-shift-box-blade.html Thanks grnspot110!!!!! I have been needing/wanting a box blade for some time now, and thanks to my dad, (jmarotz) for the use of his 4' KK bb, but with a 5' wide tractor...

This started life as a 15' tripple row tow behind model that my dad picked up at auction, took what he needed out of it, and give me the rest. I forgot to get pics of what I started with, but let's just say it didn't resemble anything like an attatchment after we hacked it up so I could haul it...

So we finally got around to putting in a new fire pit in our backyard over the weekend. The old one was just an old steel rim with center cut out and dirt surrounding it, muddy mess some days, and dangerous as someone always ended up with melted shoe bottoms for some reason;);) lol, and little...

I am building some roller harrows to hang off the back of my S-tine cultivator that I built from a 15' 3-row tow behind model that I got from my dad after he took what he needed off of it. Anywho..... I have the shaft, roller circles, and 1.5" angle iron I am going to use. Now my ?.... How do...

I have an old Ford 501 sickle mower that I got up and running last yr, works great. Now my question is this.... can a hydraulic ram be added to this to raise and lower the cutter bar? The bar can be a royal pain to hold up and install the locking rod, and vise versa to lower it. Now that I have...

Anyone have pics of where they placed a toolbox or chain bucket on their 3x20 cab tractors?? I studied for over half an hour tonite and am still lost.:o For reference... I have 300CX loader and front mount 59" blower, so I would like things to stay on the tractor and not have to swap back and...

New tractor and 59" front mount blower finally showed up today!!!!! Had to try er out with some extremely wet heavy snow.... WOW what a difference from the lil 3203 and 68" rear blower. The added power was very noticable and chewed thru the snow quite easily. Not used to having heated cab...and...

Ok here's the deal... I ordered a 3320, with the same options added below, wether the 3320 or the 3720, in mid December and after a month of no show tractor I (and the wife;)) changed our minds and ordered a 3720 with factory cab, 3rd SCV, 300 CX loader, R4 treads, front mount 59" snowblower...

Had to teach the wife how to use the blower setup due to my back being a piece of junk:mad: and waitin for my new 3320 with front mount blower to show up. She needed to know these things.... but... I think I just lost my seat time and playtime in the snow. LOL She IS kickin butt and having a fun...

I am in the process of building a 3pt S-tine field cultivator out of an old 15' pull behind. All the original mounts to hold the tines I planned on re-using, but the U-bolts are all stripping the threads out when I try to tighten down the nuts:mad:(1st pic). I have 1 different style mount which...

Hi guys... Bit the bullet and ordered in a new 3320 open station, w300CX loader, and 59" front mount snowblower to replace my 3202 w300 loader and rear 3pt Meteor blower. Looking forward to a few more conveniences and added loader capacities. Should be here in 2 weeks if things go right. My ...

Contemplating selling my 3203 with 250 hrs on it, in favor of a 3320 or 3520 and getting a front mount blower. I have some back and hip issues which get more agrivated by using the rear mount blower and cranking my body around to see it. Would like to sell as a package, but.... what's your...

Locked and loaded ready for winter!!! Got the weatherbreak, rear window, blower, weights, and oil changed. Let her snow.:D:D

My dad found this mower for one heck of a deal!!! He wanted it for his lil BX24 but, descided it would be too much for his tractor. I have a 3203 JD and we "think" it should work well for my needs..ie. roadside maintenance, pasture work, general cleanup, etc. Now the ??'s begin:o When bought it...

Currently have 2 sections (4'x10' total), hooked to pull bar and cable that hooks to the drawbar. I want to build a 3 pt setup so I can use reverse on the tractor to get the harrows into pasture corners, between trees, across driveway, better winter storage area, etc. that currently as a drag...

Thought I would share this project with the rest of you fellas. Trailer is a 1990 WW 4 horse trailer, started out I needed a new floor, (I fell thru couple times:eek:), the top was rusty from faulty factory paint, and lights were .....well worked when they wanted too. The trailer steel was still...

I like the forks dd, hope they work out for ya, as I am hoping the same results for the Frontier bale spear that I just got. Very nice fit and looks to be good quality. #AL1202E from JD. I have a local farmer who will scale down his 1/2 ton bales down to 5-600lbs so I can handle them, (I'm...

Has anyone here used the King Kutter F602 universal bale spear? And know a price? Deere wants $450 for their AL1202E, which looks good, but not the price. Thanks for your help fellas. King Kutter Incorporated

Installed over 200 posts last fall, and I am now wondering if 12' posts would have been better than 7'.:confused: They are now almost gone:eek: This snow is unreal here, the last 10 days we have gotten over 2 feet plus super winds to help move it around. Snow marker now is at 4.5' on the flats...

I have a JD 3203 with 67hrs on it and now have a mystery leak somewhere. Here is the story, the tires are loaded with CC, hyd oil is light tan color, as is motor oil, antifreeze is green, so on and so on. The color I am finding while blowing snow is a pink/red every 10-20 feet in my tire tracks...

Just got my new Femco weatherbreak installed last nite. Femco doesn't make one for a JD 3203, but the basic platforms for the 3120,3320, etc. are pretty close in size, so I figured what the heck and try one. It fits pretty well all in all. The only real problem was the door post, with it mounted...

Anyone know who makes a weatherbreak, (partial enclosure), to fit a JD 3203? Femco does not make one. And I can't find anyone else who does. Would one for the 3010, 3020 possibly fit? Any help would be greatly appreciated. Thanks.

Here is an option to save everyone some much needed cash. I had 2 sets of v-bar chains left over from my 4 wheeler, guess what, the rear set fits like a dream on the front of my JD 3203. The real kikker here is that you can buy ATV chains on e-bay for $20-30 per pair plus shipping. Now go to...

I have a JD 3203 which as everyone knows has no extra hyd ports. Does have 2 remote valves for the loader. Now my ? is, would a 12 volt hyd pump like those used on dump beds, pick-up bale spears, etc. work for adding one remote? Deere doesn't even offer any kind of kit to add more scv's.I don't...