Search results

I have a ‘92 LX176 with a 38” deck and the rear bagger. It’s been a great mower but getting a bit long in the tooth. I found a nice shape LT150 with the 38” side discharge deck without the bagger. My Deere dealer can’t confirm that my LX bagger will fit the LT, and it’s at a distant dealership...

I have a 1992 LX176 with a Kawasaki 14HP engine I bought used about twenty years ago. It has been a workhorse & I’ve had very little trouble with it. It has been blowing oil smoke at start-up and early in load (bagging) conditions for 5 + years but soldiers on. Use is in Michigan. It starts...

I’ve got a B2320 HST, FEL. Had it about 7 years and it’s maintained and sees little use, mostly bush hogging and FEL pushing and lifting when I trailer it 800 miles to my hunt property in NW ONT. It’s only got about 130 hours and has been pretty much flawless. Today I was simply running down...

I use my 2010 Tundra to tow my B2320 on an 18’ flatbed, towing it about 1700 miles per year. It tows it just fine, no problem with that. My problem is short truck tire life. My last set of Michelin LTX M&S were toast after less than 50K miles with tread actually shredding off. Other top brands...

I've searched but cannot find threads here using my mobile phone so... I need a new booster/jump starter as my old one finally quit. I see Lithium ion ones are all the rage right now. I'll use it for everything from lawn/garden tractor thru my B2320 to my V8 Tundra. Not sure how the Li ones...

Haven't been here much lately: I was browsing the other day and noticed I hadn't mentioned my B2320 for 4 years! Asked all kinds of questions here before buying it, a couple more after purchase & then 'bam', I just used it. So a quick update that might be of interest to those considering a B...

I cut a lot of rough ground & thick cover with my B2320 hydro & LP 48" bush hog. Three or four times in 58 hours of running I've nailed a big rock hidden in tag alders/grass or pulled up a big log into the blades & the tractor stalls before I can raise the cutter, disengage PTO etc. It then...

Hauled my new machine to Canada hunt camp. Bushhogged around cabin then hit woods & with dry weather this thing went everywhere, cutting trails & pushing countless trees, rocks, rotten stumps. Actually far easier than my ATV to get around back there. Also moved ~50 anthills like in the pic & my...

Got it a few weeks ago--posted here-- & getting more loader time. Today filled a 4 yd. dumpster with various stuff + dug sand to fill a 55 gallon sized old pipe hole. I'm finding it pretty stable w. my 5' back blade hanging out back. Learning digging/grabbing limitations with bucket w/o toothbar...

At dealer now. Truck was fine on 146 mile trip here. They drained/checked oil, refilled with synthetic, cleaned it up & covered my tow expenses etc. + gave me about $200 in replacement parts & cash to cover my hassle. I did not ask for nor expect the $200. They also are giving me extra 40K...

Beside my self. 2010 Tundra, bought new & as only 33K miles have dealer do routine stuff. They changed oil 1000 miles ago. Towed my tractor about 60 miles after that plus general stuff, didn't check oil level nor notice leaking oil--found those spots after the 'event'--& driving w. Grandson &...

OK I'm a certified idiot. Gonna take off the bush hog today & think I got the 3-pt hitch understood but the PTO coupler is hidden by a plastic guard on the hog driveshaft so can't see how it decouples. Does it just pull & drop off like a car U-joint once the 3-pt is off? Supposed to be 'push...

Some guys asked questions about the ramps on the trailer I just got so here are a few pics of it. It's the 'Economy Car Hauler'.

Picked it up today & took it to my MI hunt camp to run it. Nice little tractor & so far like everything. Mainly cut trails inc. one w. two year popple regrowth. Only chunked one rock + about five logs! This thing is gonna get some use, thanks to TBY folks for input during my search.

Picking up my new B2320 Saturday to start learning it. One issue: main use will be where really level ground is very hard to find, no concrete pads etc. I want to drop the bushhog & backblade etc. plus reattach for use up there. Thinking to hunt up some pallets and try to shim with boards to get...

A friend is using a Bobcat 863--I think that's the one, tracked & about 75 HP--and heard a 'noise' the other day when running & when he stopped it it wouldn't start. Starter was pulled & bushings were burned. Put the new starter in & as soon as he hooked up the battery the starter turned with...

I've read countless posts here on loaded vs. ballast etc. & consensus seems to be "everybody loads". My new B2320 should be ready to pick up this coming week. FEL w. 4' LP bush hog and 5' LP back blade, R4s. I ordered it w/o loaded tires as its main use is well back in the woods--alone--and me...

Boy, does that feel good. Here it is awaiting change to R4's + the 364 loader. Got this 10,000 lb. dovetail trailer and the 4' cutter, box blade, tire repair kit, two chains/binders, two straps, 50 hour service + probably a few things I'm forgetting for $19K + tax. I'll pick it ip in about 10...

Planning to order a B2320 this week but looking 'used' to the last minute. Found a B2400 HST w. 351 loader, power steering, one family owned, 392 real hours, it is in excellent shape. Has great turfs I'd likely change to industrials ($1000?) but can get it for $9300 vs. $13,900 for a new B2320...

Gonna get one of these w. FEL + 4' RM (bush hog). Dealer thinks 16' will handle it, I don't think so. Here's my situation: I live in MI but will tow this rig 800 miles each way once/yearly to work on my Canada camp. Got a Tundra w. tow package--8300 lb. tow capacity--& will get brake...

Question for guys who use B-series in the woods: getting B2320 or B2620 w. loader & will use with 48" rotary cutter on woods trails that are only 10'-15' width. Now use ATV + 44" tow-behind Swisher rough cutter & nearly impossible to back that rig up in that space w. very long 'tongue', low...

Amazed to see I first posted here 3 years ago on a used tractor & still don't have one so visited a dealer I like & got a good price on B2320 HST w FEL, 4' bush hog, loaded tires + trailer. Way more $ than I originally was planning but after looking at used stuff forever its the way to go. It is...

Have been looking for a tractor for too long & missed a good Kubota on CL two weeks ago. Missed this one by about two hours, a good deal that actually hurt as I thought I was finally 'done' & was looking at trailers & had gotten cost of getting Ags for it. It sold the next AM before I got up...

Looked at a B6200 today. SN 61433, geared, 4WD, unknown aftermarket loader (pistons say "Chief"), back blade, 6' plow jury-rigged for loader (!!). 219 hours showing but likely 1219 or who knows, new foamed rear tires. New hydraulic pump within past 3 years. Cosmetically pretty darned clean...

Today looked at an '85 JD 750 compact. Gear driven, 4WD, ag tires, no attachments, suitcase weights, 1500 hrs. 2nd owner, tractor has been used only to cut fields/lawn w. rear rotary + some recent rototilling. Very nice shape, no blow-by, clean oil, regular service, good rubber--tires not...

I'm looking at CUTs and this one caught my eye in MI. Drove it today, really liked the way it handled, controls, etc. I'm new to this but liked the machine. Anyway, here's the deal: a 2007 model JD 2032 w. 200CX Loader, 69 hours, looks = very light use (almost new), no Xtras except one eye...

Hi, new here but LT reader of this and other forums. My only tractor experience is with my lawn JD LX 176 (love it). I live in MI but own hunting land in NW Ontario, 800 miles from here. My primay needs there are to cut trails--about 1 mile of 'em, 8'-10' wide, tall thick grass + 1"...