Search results

I think my switch has gone south on me. Last couple weeks it has hesitated, seemingly at the Key and I think it is the switch... I have tapped on the starter a number of times and no change. Lights all work. New bigash battery and clean terminals.... Anyone ever replace the iginition switch on...

Greetings from the PNW. I have a pond plus or minus an acre in size. It is a man made pond from the era of taking livestock to the water. It is fed by winter and spring run off and a spring. The west band was compromised a few years ago by a combination of beaver and cottonwood. Last summer I...

I found this to be a real winner for me. White paint on the sides of my SSQA manure forks and forklift forks helps me line up much easier from the tractor seat.

These two additions make sense when I am working in the orchard and need to do some real clean up. Two pieces of pvc pipe, cap glued on the bottom with drain hole drilled. Plywood and two by four box fastened via one bolt and one pin. Box come off when doing maintenance.

This was a "been gonna" project for a while. I made a mock up out of wood and screws. I went to the scrap yard and bought the aluminum I wanted. I cut it all to size, took it to a job shop and had it stuck together for 45 bucks. The side pocke insert piece is solid, so is the outer lowering...

My new Northern Tool pressure washer started out wonderfully. I dunno what happened. First time out. Ran it for an hour and a half, two at the max. Shut down. Put some more gas in and yank on it to rock and roll again. Nada. Dang near tore my arm off. Then the starter rope slipped out my hands...

I need a new starter assembly for my old mower. Bendix spring is shot, ditto solenoid. Anyone have suggestions and good review for aftermarket or rebuilds? thanks

two by eights six feet long. two by four six feet long, ripped. douglas fir star head exterior wood screws works fine for me, I have tried repeatedly to post photos and to no avail. Done it lots of tiems before, but for some reason, they don't come through. Anyway they slip on the forks like...

I recently acquired a rather derelict LX172 as a barn find. Hood of course toast. Couple tires flat. Bagger assembly intact. I drug it out and loaded it onto a trailer and hauled it home. With some standard boy scout procedure I got the Kawasaki 14hp to run like a clock. New air filters, plug...

I am finding that five to six inch stuff is having a difficult time getting through the rollers. They chew it up and don't digest as they should. Maybe I set the spring tension wrong? Should I loosen and back off on the eye bolts or tighten them up? Or is it something to do with the small set...

Woodmaxx pto chippers come partially assembled but crated with a platform and uprights made of rectangular tubing and angle iron. I had this thing sitting around wondering what I was gonna do with it. On the bottom I added some big C iron to house my tractor forks. A couple more pieces of angle...