Search results

Got a MF-240 with 3 cyl Perkins diesel. About a year ago I replaced seals on throttle and shut off shafts now have a new leak. Its dripping fuel off what I think is a banjo bolt on bottom of pump onto oil filter below it. Thought it was coming from inspection cover to the left but after cleaning...

I bent the PTO shaft while bush hogging this spring at a remote piece of property. My dumb a** forgot to bring the shaft home with me so I could order a new one. Is there a standard size for these? Would like to have the new replacement in hand when I return in a couple weeks. Its 8 hour drive...

Getting ready to replace the fuel filters on an older MF 240. According to Agco online parts manual both filters are the same. Is this correct? Just assumed they would be different micron ratings like most primary/secondary setups. Anyone ever replace this setup with spin on filter heads? Looks...

Looking for advice on how serious/expensive this might be to fix. Late 70s 245, draft and position levers stuck together. Will raise and will lower, but no in between. If moved at all much lower than full up position the arms start to drop. Previous owner said was working fine until he forced...

I am looking for the part number (or even better the part) that the steering cylinder attaches to. Its a bracket mounted to the side of power steering equipped tractors. Anyone have one or know where I can find one? Its marked with a red X in the pictures.

Trying to install parking brake on my 245 that was missing it. Setup is nothing at all like my 150. Anyone have a pic of theirs that that could post? I'm including a pic of my 150s brake, and a pic of the 245s replacement park brake kit. Can't seem to get it on right.

Picked up a 245 with Bush Hog 2345 QT loader. Loader was removed by previous owner as soon as he bought it, so he was no help on it's operation. Has a TS300 three position valve in front of seat. From there 2 hoses run to two 2 way valves, then on to 2 quick connects on rear fender which the...

Picked up a non running 1530 with a 143 loader. Got it running and have a few issues I wanted opinions on. 1 Hydraulic pump making a lot of noise when not under load. If I turn the wheels or operate the loader noise goes away, but immediately comes back when not in use. 2 Thought fluid might...

Have a chance to buy a low hour (less than 3000) 1 owner 150 with fresh paint for a good price. Tractor had been sitting for many years, was given to local body shop as payment for painting owners van. They in turn painted it to help it sell. Wish they hadn't but oh well. Long story short it has...

So was blading the driveway with the 40 the other day when it started missing real bad. Almost like ignition turned off, then it would recover then do it again few seconds later. Not sure if its electrical or fuel related, and since I cant describe it very well I posted a video on youtube so...

Found a nice JD 40-U that I plan on buying. Anyone know if it will fit on a Uhaul car hauler trailer? They can handle up to 5900 pounds so weight is not an issue, just wondering if the deck is to wide for the tractor. Anyone done this before? I hauled a MF 135 with one of these and it worked...

Picked up a Hinomoto E14 the other day thinking since it was made for MF parts wouldn't be a problem. Guess I was wrong on both counts as parts are scarce and I found out this was not the model made for MF. Still a great running little tractor and I am satisfied with the purchase so far. Has 690...

So im looking for a diesel powered SCUT to keep a 2 acre yard mowed with. Found a Kubota B6100 HST with a 48" belly mower, but it has 2000 hours on it for $2200. While it seems to run good, isnt that approaching rebuild time? Also looking at a Yanmar YM1500 with only 500 hours on it that I can...

I am trying to rebuild my carb and have discovered some missing parts. At the bottom of the bowl it looks like there is supposed to be some sort of valve or jet assembly. On mine there is just a pipe plug someone screwed on to seal the hole. Suprised it was still running, although might explain...

Well I just got my new acquisition home. After a little online research it appears as if I am the proud owner of a 1973 industrial mf135. It has a 3 cylinder Perkins gas engine, and a 3 speed tranny with high/low. The tractor was originally yellow and has a hand and foot throttle. I know nothing...

Was wondering if anyone could tell me if I could haul a Massey Ferguson 135 on a Uhaul auto transport trailer. I am unsure of the year of the tractor and am posting a pic in case it helps. The weight of the tractor should not be a problem, I am just worried about the width. I can't find the...