Search results

While the new BX4090 cab is officially for the 80 series tractor, would it fit on a 60 series BX25? What's important is the shape and dimensions of the floorboards and rear fenders, if they are the same it should be able to be made to work.

Can anyone share a picture of the BX3086 conversion kit? What does it look like? Cannot find a picture of it anywere on the internet. How about the BX3028 boot kit? What comes in the boot kit besides the boot? Does the 8" hose come with the kit? Does anyone have a copy of the GCK60-23BX...

Anybody out there believe in not greasing specifically the mower deck gauge wheels, on the theory that the grease and dirt make a nice grinding paste. I took the wheels off the shafts for the first time on my RCK54P-23BX deck and was surprised at the wear on the steel axle shafts. I thought...

What is the best valve to use for rear remotes on a BX25? I see the specs on the 60 series tractor is the max GPM is 6.3 so the valve does not to be a high GPM model I presume. What about this 8 GPM valve? 2 SPOOL 8 GPM PRINCE MB21BB5C1 DA VALVE Or this one with float ? 2 SPOOL 8 GPM PRINCE...

For those that use the vacuum cleaner while removing the transmission strainer on a BX. Do you hook the vacuum hose tightly to the dipstick hole? If so do you have any problem sucking up fluid into the vacuum? Or do you have to purposely leave a little break or leak in the connection to avoid...

Has anyone mounted a grass gobbler, accelerator, type metal side bagger on a BX25 or other SCUT tractor? If they work well on a walk behind they should work the same on a rider. The problem with ordering one online is the application charts to select the proper one and the mount bracket do...

Well this is not specifically a tractor attachment, but it can be! Wilton Vises | Truck Hitch Mounted Vise | ATV All-Terrain Vise Anyone see one of these in person yet? I have been shopping the flea markets and swap meets hoping to find a good old made in USA vise for my garage. But I may...

There are posts on TBN about grass buildup under the mower, adjustment and cut quality issues, but I have no problems with any of those issues. What I would like to know if there is a solution for is the grass that winds up everywhere, bunched up on top of the deck, on the operator floor mat...

I know that several people have done a nice job installing a better filter for the first fuel filter that is prior to the electric pump. And most route the fuel line forward to the new filter and then back again to the fuel pump left in its stock position under the tractor. But has anyone...

I have a 2008 BX25. I see that Curtis has a new part number cab for 70 series BX tractors, the steel door cab part number is 1KBX70AS. I like the design of it much better than the 1KBX25AS that they have had offered for the BX25, specifically the hard removable rear panel and the larger...

Most of the time my Kubota snow front blade is all need for snow here in NJ on my BX25. I also have Martin Meteor rear blower I rarely use. This last thick wet snow was too much for the blade, the big wet piles it would start to make it could not move once it made them. So I out the blower...

Hello Has anyone seen the new BX25 factory thumb for sale online from any of the online Kubota dealers? ORDER CODE BX6316 Mechanical Thumb (BT602 Only) FACTORY NUMBER K292B50 suggested list $375.00 Has anyone fabricated their own welded on bracket that is missing on older BX25's to fit...

Any of the aftermarket OCDC's (operator controlled discharge chute) I see seem to be only for zero-turns and walk behinds. Does anyone make an OCDC for SCUT's? I'd like to have one on my BX25 / RCK54P23BX like on the Dixie Chopper zero turns.

I pulled out the eleven plastic "Christmas tree" ribbed shank fasteners that hold down the rubber floor mat and pulled up the mat. After four years, a layer of mud and water was under there but it washed up OK, no rust spots that I can see. The ribbed shank fasteners are tough to get out, and...

Does anyone know if Kubota still offers the Jodale Perry built, Kubota BX6730 cab? Does anyone know if it will accommodate the backhoe on a BX25 with or without modding? Does anyone out there in TBN actually have one? Does anyone out there in TBN actually have a Laurin Eclipse cab on a...

HVAC trained tractor guys please weigh in on my idea. My attached garage is fully insulated, but not heated. If I leave the door to the house open on the weekends it will get comfortable in the garage. But dust, dirt, fumes of course make this not an ideal solution. Not to mention the rabbit...

I just bought a used Bannerman BA-400 aerator. Does anyone know of an online retailer from which I can purchase parts? Does anyone have a .pdf of the parts list or owners manual that they could share? I emailed the company but got no response.

For those that haven't seen it yet, check out the new website for AI2 Products. Home

Hello I just bought a used BX2763A front blade. The previous owner modified it for another tractor. He cut off the bracket that the power angle cylinder connects to. Can any one out there that is handy with measuring instruments help me with dimensions so that I can rebuild this missing part...

Has anyone out there tried this? http://www.schmidtproducts.com/7501/7801.html I am thinking it would be useful to take my rear blade over to my Dad's and snowplow his driveway, instead of loading up and taking the whole tractor.

Well I did my 50 hour oil change this weekend at 48.9 hours on the hour meter. I changed the engine oil and filter, the HST oil and filter and cleaned the screen, and changed the two fuel filters, and changed the front axle oil. The air filter looked fine, just wiped out the little bit of dirt...

There has been some talk of the Laurin Eclipse cab here. Does anyone out here in TBN actually have one? I would hope that someone that actually has one to share some pictures and experiences with us.

I am at 42 hours. I hear an occasional screech from under the hood once in a while recently, usually shortly after startup, this is a new sound. I guessed a loose fan belt might be making the noise. The bolts on the alternator were very tight! After loosening the top adjustment bolt it still...

I installed my new polyurethane edge last night, and made my own chain lift rods so that it can follow the driveway surface. It's raining now, supposed to be 1"-3" of snow tonight. I might get to try this out by tomorrow. If it don't snow I can squeegee off the water. :D I still can't help...

Is there anyone out there that can share a success story of finding just the right pan that fits between the rear tires of the BX25, fits under the hitch frame, and holds all the oil that will come out?

The Workshop Manual and the Operator's Manual seem to disagree with each other and are as clear as mud. Which of the two plugs would you fill the oil level to? The smaller lower one or the larger upper one? Both are circled in yellow on this picture. The Operator's Manual says to fill it to...

I had a blade fall off yesterday while mowing. Normally if getting off the tractor while mowing I would throttle down and then disengage the PTO. Well this time I just got off with the RPM's up and the PTO engaged without thinking to move something out of the way. It was a good test of the...

The stock threaded top link on my BX25 travels from approx. 14" to 22" I have been looking at some of the products mentioned here on TBN but have not found an exact match in a hydraulic top link. Surplus Center has one 18.125" to 26.375"...

Can anyone share a picture of the BX8064A front weight bracket, and BL8060-1 suitcase weights?

When you look at the Kubota website and I look at the available implements available for my BX25, they don't show the part number / model numbers of the implements. Sure one can hunt around here on TBN or the internet and come up with them, but it would be nice to have a complete list of all...

Can anyone suggest some good online dealers to buy a polyurethane wear edge from? I found this dealer, FallLine Corporation | Specialists in Urethane Technology and Manufacturer and Distributor of Custom Molded Products and Ski, Construction, Snow Removal, and Sports Recreation Industry...

Has anyone seen this concept applied to small tractors? I would want all four wheels secured, not just the front two, but it might be the answer since I cannot figure out where to attach straps or chains to my BX25 without damaging it. Tie down system, tiedowns, wheel chock, The Tire Trap

This is very cool. Pronovost- PXPL Snowblowers But the smallest one is 86" so it's not for the SCUT crowd. Is anyone aware of this style being made in 48" by another manufacturer?

On the right hand group of levers there are 3 levers but there is an empty slot for a 4th lever on my BX25. What is that slot meant for?

Does anyone have this brand of canopy or have you seen one? Tractor Canopy, Tractor Canopies,Tractor Sun Shade,Mower Canopies,ROPS Canopies,Factory Direct Canopies I like the idea of the color being all the way through, and not painted.

Has anyone purchased the WSM work shop manual for their BX25? Do you have part number 9Y111-01970 or 9Y121-01970? Are your pictures in color or black & white? Thanks

I want to put a bolt on replaceable wear edge on the FEL of my new BX25 before it sees any use. Is the 6" hole spacing a standard? I only want to drill once and get it right! Wear is the best place/price to order a 48" bar from? I don't see it at TSC or Northern Tool. How does the slip over...

Where exactly does the front quick attach bracket bolt to on the tractor? Can the BX25 grill guard stay or does it have to go when you add the quick attach bracket? Any pictures? Anyone have the manual for the quick attach in pdf? Thanks