Search results

If you are curious about the builds, check them out here - https://www.youtube.com/channel/UCWVSa5kgbGqcpaZUgesS4JQ

Hello, I need to replace a couple of the Hydraulic QC female couplers. The part number called for is AM102487 and the are currently running $36-38. Does anyone know if the LVA16843 from Summit will work? Asking because they are half the price of the AM102487. Alan

Does anyone have experience with the pto selector lever breaking the bolt where it threads into the shaft? The bolt broke pretty much flush at the end of the shaft. Is there a way to get that shaft out without disassembling the whole rear end?

Where can I find a wiring schematic for the 2305 tractor?

Does anyone know where I can get a rebuild kit for the curl cylinders on the KL130 loader? I just called a Kioti dealer and they want $280 per cylinder. There has to be somewhere cheaper....

Does anyone know where I can get a good quality mid mount finish mower for a CK25?

I just installed full hydraulic steering on my truck and am wondering if anything special needs to be done to bleed the lines to the cylinder, or do they self bleed? Alan

Here is my latest project. I started with a frame for a snow plow and a friend suggested forks...which I really wanted, so he and I came up with a design that does both, I just remove the pins that hold attach the blade and slide the forks on. I'm also working on a slide/bolt on grapple setup...

First off, I don't know that much about the Kioti brand, so I'd love some feedback from you Kioti owners. Are you happy with your Kioti's, have you had any problems etc. I am looking at a new CK25 (shuttle shift) with a KL130 loader and 1 set of rear hyd. outlets and was quoted $14K, does that...

Does anyone know if NH offers a kit to add an aux. hyd. line on the loader. If so, how much?

Need advise. I am in the market for a 72" tiller and would like input. Is 4 or 6 tines per flange better and what about reverse rotation? Also, I don't want to buy a tiller I can't get parts for. I use this tiller to till gardens, and prepare flower beds and to rip up yards to replant. Our...

What can anyone tell me about the 170 skid steer? I'm looking at one and have no knowledge of them.

Looking at a 170 JD skid loader, does anyone have any knowledge on them? good, bad whatever?

The bucket cylinders on my 16LA have something going on with them. If have the bucket in any position other than full curl back, I can lower the lift arms and the bucket will curl back several inches, then firms up. I have not noticed it bleeding down if I leave the bucket full. What do I need...

Bout to test NH. Just before my warrenty expired in May, My TC35 3 pt. developed a real bad leak down. If the tractor was idling, it would shake as the 3pt. kept dropping and raising. I took it in, and they "fixed" it under warrenty. Now here it is 2 months later, out of warrenty, and had the...

I have a standard TC35 and the FEL joystick is stiff. This occured after I was got off on the right side and my shorts caught the stick on the way down. I worked the stick back the other way and loosened it up some, but its not operating as it should. What should I look at to get it fixed?

I have seen 30-60 horse tractors pulling lawn rollers that are at lease 6 ft wide with a bunch of tractor weights mounted to them as well. Are all these custom made or are they on the market?

Does anyone know why backhoe controls are located directly in front of you but excavator controls are located off each arm rest? I am looking to build a Cadplans 808 backhoe (3pt version of the 821) and have been thinking about setting up the controls like an excavator for greater operator...

Does anyone know what the ship weight is on a TC35? Or what the weight would be for a TC35 with 16LA? Thanks Alan

I would like to add some removable weight to the rear of the tractor to use when plowing etc. My local dealer told me that I would be looking at 1$ per pound. Didn't matter if it was wheel weights or suitcase weights. Does this sound high? I have been watching auctions to find some old style IH...

I just came back from the dealer after picking up 10 gal of G134 Hydraulic oil, 1 Hydraulic filter and 1 fuel filter. I must say I thought I was going to have to clean my shorts when they gave my the total, $153.53 WOW@! Is there somewhere else to get that stuff cheaper?

My TC 35 hydraulics has just started surging when the tractor is idling. Tonight, the bucket was rising and dropping a 1/2 inch or so with this surge. And the attachment was doing the same. Yesterday I hooked onto my finish mower and left it raised and shut the tractor off, and within 5...

Anyone the specs for this hoe? It is on ebay, and they don't list anything that would indicate if it will work with my TC35

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3803149636 I went on John deeres website, but was unable to find any info. I wonder if it is simular to a pulverizer with a seed box.

I have heard both ways, whats the general concensus here?

Where is a good place to get one?

Two implement dealers around here both have Long 1199B 3pt backhoes. I have looked at one and am unsure about the controls as the labels are gone. It has 2 joy sticks and a foot pedal on each side. Does anyone know what the foot pedals control? Also, is Long still in business?

Particularly, trunnion. Thanks

Please post some picks of your 3pt backhoe frames. I just purchased the Cadplans mdl 808 backhoe plans, and I don't like the design of their frame so I need ideas. I am looking to modify the design to include a location for a hyd. fluid tank, relocate the swing cylinders and put retractable...

Does anyone know what issues would need to be addressed to add an extend a hoe feature to the Cadplans 808 backhoe plans? If I could add that and get Cadplans to sell me their 808 hoe plans along with the hydraulics and retractable stabiliazers of the 841 kit, I think that would be a awesome outfit.

Anyone know how much horsepower is required to run a standard baler? (not the big round and square balers) I have an opportunity to get free straw, and have access to a baler, but don't know if my TC35 can handle it.