Search results

I removed a dead starter from the Predator 670, got a new one and I can't for the life of me figure out how to get it back on. Anyone know if there's a trick to it?

I swapped a Predator 670 engine into a John Deere 757 zero turn. I started the engine, engaged the pto, cut some grass, but the engine was smoking very badly, so I removed the engine, exchanged it and the new one runs great but when I turn on the mower it dies. The belts are free, the clutch...

I built a mini brush hog mounted on the fel of my Kubota. It is a Toro 36 inch 2 blade deck, driven by a Kawasaki FC420v engine. It works great except sometimes it "squeals like a stuck pig" when the blades are engaged. All moving parts are fine on the mower. I spun the spindles up with a...

It suddenly happened where pressing the pedal stopped the engine. The seat switch was bypassed a long time ago and worked fine. I found that tapping the brake pedals solved the problem. Does anyone know what that brake switch is for? if I lock the brake pedals, and press the HST it tries to go...

I have a cyclone rake mounted on my Kubota zero turn mower and it works great until the leaves get too deep, then it pushes a pile out front. It seems to me that I could improve things by raising the opening in front with a removable panel, or maybe a chain curtain like a gravely I used to have...

I purchased a 4800 watt emergency generator and intend to run it under load every 6 months. My question is how much load is necessary. I bought a 1600 watt range top element to use, but I wonder if more is needed. they are only $17 so no big deal to add another, just wondering if it's necessary.

My generator was running great until I suspect a little extra load tripped the breaker on the unit. I pushed it in, felt a click, assumed that was the problem. However when started there was no power in the house. When I checked the generator outlets the 110 volt worked, nothing on the 220 volt...

I have a Kubota 2029 with a modified truck snow plow mounted in place of the bucket on the fel. I want to use the bucket curl functions to angle the plow. I am adding diverter valves in the curl circuit to do this. I disconnected the connections from the rubber hose to the steel lines and...

I have a 2920 with the LA364 loader that has 80 hours on it. Today I raised the bucket all the way up with a light load, and it would not come down. With the engine off, if I press the lever very gently, it will come down slowly. If I press a little harder it stops. If I press hard, past the...

I need to find the engine coolant drain on my tractor. I don't have a manual. Can some kind soul help? Thanks, Rich

I need to find the engine coolant drain on my tractor. I don't have a manual. Can some kind soul help? Thanks, Rich