Search results

Anyone have experience with the aftermarket hood and cowl for Deere 4400 series? There seem to be a variety of mfg, suppliers and prices. Like this https://www.amazon.com/gp/product/B0DY1WZWTQ/ref=ox_sc_act_title_7?smid=A3QEAIM7YYCNN4&psc=1 and this...

If it has any kind of computer you should disconnect it, they don't fail often from welding but it happens sometimes. Disconnecting the battery doesn't do anything.

I'll take another look. I believe I can see all the fuel lines and filter from the bottom of the tank to the injectors. There is a blind spot behind that sheet metal that is hard to get to see what's above it. Perhaps I can take a look with a mirror before I start taking things apart. I was...

My 4410 is leaking fuel from above the fuel line where it goes through the sheet metal behind the fuel filter, see picture. From looking at my shop manual it doesn't look like there is anything up there that is a logical leak. The sending unit isn't leaking and none of the fuel lines are either...

In my 杜eadow restoration project the seed provider has recommended mowing to 8 when it gets about knee high. any suggestions on how to mow to 8? I値l presume a brush hog would do it be I don稚 have one an haven稚 been around them much. I only have about a ｼ acre or so to mow. I have a 318 JD...

When I am digging dirt with a box blade that I want to move to another location I have a problem that I was hoping someone has a good solution to. When I have a box blade full of dirt and am at the end of the area where I want to remove dirt I'll raise the box and allow it to fall out. On the...

How come tooth bars and/or toothed buckets arn't commonly available from tractor manufacturers? Perhaps they are more than I think, I don't know tractor's very well but toothed bucket certainly seem to be common on bobcats. I am probably speaking mainly about JD's, I seem to have a mild green...

I recently got a JD 4410 and it has one problem that the part is a little pricy, about $300 so I'd really like to be able to straighten this threaded rod that is part of the 3 pt. lift rod assembly. I tried heating it with rosebud and then screwing it into the casting but it seem to cool off...

My 4410's manual says the recommend low vis but then they have a temperature chart that says ony use low vis to 80 degrees F. and that seemingly Hy-gard should be used for higher temps and it is suppose to be good down to 0 degrees F. My dealer (parts man) says they put low-vis in everything...

Going to look at a 4410 this saturday. Whats $13,800 for it. I has 4WD, hydrostatic drive, load match and cruise. 954 hours. Says he works for a rental company that is located on the NC coast and that he used it for a year around his house to do some things but doesn't need it for anything...

I am looking at buying a 4410 vs a new model, does the 4410 does it have position control on the 3pt? This seems like an important feature for the grading I want to do. Do any of the other non-current model have position control? Thanks, John

Why do people consider 4WD so important if you are going to have a FEL? I understand that with the bucket full you have a lot of weight on the front but a box blade and perhaps wheel weight etc. on the back it should be counterbalanced fairly well. The reason I am asking is that 2WD with...

Has 350 hours on it, turf tires and looks in good shape. I think it is a Frontier blade and it is a 52 loader. Asking $6900. Is that resonable? ] Also, if it has 4WD (what I really want) how much more would you expect to pay? Thanks in advance.

I think I am going to look at a 955 that doesn't have a rear pto shaft. From the picture it seems to be a well made cover over the opening. Any opinions on what is probably broken inside and maybe what it would cost to fix? Thanks for reading

Hi, I need some help deciding what tractors will fill my needs and what I particularly need to look for. I have couple of acres that is heavily wooded with some open areas. I really want to have a continuing landscaping project and think I deserve a tractor with a loader. On my property...

There is a BX2200 nearby that has "HYDROSTATIC TRANSMISSON. Kubota front end loader. Kubota 5ft belly mower. Woods 4ft rototiller (low hours), Leaf vacum system (needs minor repair), 4ft box blade with rippers, 4ft landscape rake, 4ft KIng Kutter bush hog (works/cuts fine, need cosmetic...

Looked at a 655 with a 70 loader on it today. Whats $5350 for it with almost 1200 hours and a new Howse 4' box blade. The loader seems to be in good shape, the bucket may have been replaced or at least the edge recently. A couple of things I could use some information on. In high range...

Hi, My name is John, I live in NC. I am thinking about buying a compact tractor with a FEL. I'd use it primairly with a box blade to do landscaping planting projects around the wodded 2 acres I have here. I now have two JD318, only one running, it has a 3 pt and I have a 4 foot box blade...