Search results

This might be little convoluted, so please bear with me. I was under the impression that aside from the engine and a few other things like cruise control, the B2710 and B2910 were pretty much the same tractor. Why then, do they call for a different mounting configuration when putting a BL4690B...

As noted by Slowzuki in another post, here in Canada there is no such thing as regular UDT and Super UDT. We have "Premium" UDT. Period. It sells here for about $65.00 CDN for 20 liters (5 gallons). A couple of posts from Kubota owners who've gone from UDT to Super UDT (or gone the other...

Clutch Won\'t Disengage PTO I've noticed a "knocking" somewhere in my B2710 HST driveline for a while now. I becomes more predominant when the machine has been working under load (ie. pulling the box scraper/landscape rake. etc.) Mechanics at the dealership can't identify what the problem...

Just got a Maschio W125 tiller. (Chain drive.) Noticed a bit of oil seep on the top end. This is coming from somehwhere around the area where the drive shaft goes through the side of the tiller to meet the top sprocket of the chain drive. I'm thinking a bearing for the drive shaft is seated...

Anyone ever heard of this one, please? I'm wondering about setting it and can't find a thing anywhere. Thanks, Slim

I'm looking at a 48 inch tiller with offset to run on a Kubota B2710 (20 PTO hp). My rear tires are set to about 54 inches and while I'd really like to be able to cover myself in one pass, I'm a little confused by all the different PTO hp requirements different manufacturers list for their...

I have a 5 foot rotary cutter made by World International Machinery(?)... the outfit out of Bethel, Ohio. I drop my RPM's down to engage the PTO and as I'm powering up to the rated (2,600) engine RPM's I get a distinct wobble from the cutter. It stops at about 2,000 RPM. I've only used this...

Have a chance to pick up a 7 foot landscape rake with gauge wheels at a pretty good price. Am I going to be happy with this on a B2710? Thanks, Slim

Picked up a brand new Kubota B5320 Ballast Box at auction yesterday for a real good price. Measures about 16X16 and 30 inches wide. I'm looking to use this on a B2710 instead of the box scraper when I'm doing loader work. It's not quite as robust as I'd hoped for, (quarter inch steel ears and...

My year 2000 Kubota B2710 (Hydrostat - 325 hours) has developed a nasty knock somewhere in the rear end. The closest I can come to describing it is somewhat akin to a bottom end knock in an engine. It's there whether the PTO is engaged or not. Bought this tractor used with 210 hours on it and...

When I dump the LA401 loader on my B2710 I get a "stop" when I'm moving the joystick to the right. I move the stick to the right to where it stops and it slowly curls the bucket down. I can "push past" this stop and get a much quicker dump, but it's taking away some of the fine control to do...

I've been cutting a trail through the bush at the back of my place to: a. get to the property line to fence and b. do some ditching to deal with a drainage problem. The annual monsoon abated three or four days ago, the temperature fell to just below freezing and we have about 3 inches of frost...

I've noticed on my last couple of outings that the LA401 loader on my B2710 has been a little "slow" when dumping. Not as responsive as I'd like. This afternoon I noticed a slight catch as I moved the stick over. Nothing I couldn't move past with just a little more pressure, but a definite...

I'm running one of the older B2710's (serial number before 15496). I only use one hydraulic filter and the hydraulic suction filter (strainer). I'm a little confused as to which hydraulic filter I want. The Kubota look-up page calls for 67955-37710. TractorSmart notes the same part number...

I'm going to admit that this whole computer/Internet/ecommerce thing is a little new to me. I'm also going to admit my ignorance of what's going on, but I'm seeing some tractors for sale on this e-bay for ridiculously low prices. I notice that you have to "pre-qualify" and these sellers...

B2710 Hydraulic Leak... I Can\'t Believe This! Was doing some hoe work this morning, stepped down to do some work on the ground and noticed a pretty fair flow of fluid running out from the belly just behind the rear cross member of the loader frame. Shut things down and discovered that the...

Wondering if anyone knows of any good web sites on installing load equalizing hitches. Thanks, Slim

Where\'s your favorite place to do it? Which part(s) of your tractor do you like to use as tie down points when your tractor is on a trailer? I'm legally required to use 5/16 Grade 7 chain and binders where I live. A four point tie down is mandatory with one chain on the front and one on the...

Had the good fortune to have a local fabricator build me an 18 foot, 7000 lb. car hauler to move my B2710, loader and hoe. And yes, it fits perfectly. And yes, the price was teriffic. The one thing I missed the boat on was ramps. Never occurred to me. The rear wheels, of course...

Didn't realize the rubber pads on a Kubota backhoe stabilizer pad were not included in the purchase price. Thinking about getting some rubber stall mat (recycled tires, I believe) and using that. Anyone ever done this? Advice on laminating two pieces together for extra thickness? Thanks, Slim

I\'m confused here... The UDT in my B2710 was fried yesterday when it ran for about 5 hours with the parking brake on. (That's a whole other story.) I bought this tractor used with 201 hours on it, and the UDT level was high on the dipstick. I thought somebody might have checked it with the...

It doesn\'t add up... The UDT in my B2710 was fried yesterday when it ran for about 5 hours with the parking brake on. (That's a whole other story.) I bought this tractor used with 201 hours on it, and the UDT level was high on the dipstick. I thought somebody might have checked it with the...

Knocking... Oil Filters... What\'s Next? Forgive me for "doubling up" on this. Have a similar post on the "Kubota Forum," but hope I can get a little more feedback by posting here as well. Have a used Kubota B2710 HST with 211 hrs. on the clock. Looks to me like the original owner over filled...

Have a used Kubota B2710 HST with 211 hrs. on the clock. Believe the original owner over filled the HST to just about twice the height called for on the dipstick. Haven't run yet, and won't 'til I get my fluids fixed up. I'm new to this HST thing, and wonder if this might account for a...

I have an acre of cleared land that I need to contour into a swale that will border a drainage ditch. My basic plan is to rough cut it, break it up, and go to work with box blade and loader. I don't know when this land was logged, but it's been at least four years, and it looks like they...

Please let me preface this by stating that I don't want this to turn into an HST/GST debate. I recently bought a very nice used Kubota B2710, and while I really like the HST for a lot of things, it's just not quite enough tractor for me. The local dealer tells me he wouldn't use it to pull a...

And wasn't I pleased to find this site? Been having a look at things the last couple of days and I'm impressed with the great amount of knowledge freely shared here. Well done! Picked up a nice little B2710, and it came with an Ezee-On 1400 3pt. PTO driven post pounder. Just moved to this...