Search results

Hi guys, i haven't been here in soooooooooo long, i can't rememeber ;), anyhow, anyone here have or know anything about Eastwood welder/plasma cutters? Just happened to notice this company, and have not a clue about their products. Currently looking for a new plasma cutter. I did have an...

So far i find it to be a good machine, only thing i have replaced si the ground clamp. What i like is that the mig gun is pretty long, compared to my miller and lincoln models. I used the spool gun a few times to repare ski-doo stater casings and broken mag wheels, i use 0.035 4043 wire for the...

Have one, great allaround machine, i got the spool gun and cart too.

I have the same machine, have half a 12lbs roll used up on mig. I find it to be a good all around machine. Have not tig welded with it, but mig, stick and welded aluminum with the spool gun. Runs 7014 good, 7018 fair, but dont even think about 6010/6011

I have an Everlast Power Plasma 60S, great machine without paying for bells and whistles, always works when i need it, very satisfied with the unit, would buy another one without hesitation.

Hi guys, Just a quick question, my uncle has a 1986 MF1010 tractor 6x2 tranny, and he asked me if i new where to check the oil, i said to look for the dipstick but he said there wasn't any. Septical that there isn't one, i went to see, and i couldn't see it either, Does anyone know where to...

Just Though i'd show you my new welding rig.

Hi everyone, wondering where to find performance parts for my MS461. I've been looking over the net, but i guess i'm not looking at the right places:laughing: I need an after market ignition coil that doesn't have the rev limiter in it. Thanks

Finally the wait is over:cool2:

Well it's time to shop for a new saw, having sold my 1 year old saw, it's time to buy something else. If been shopping around and the 2 models i'm looking at are the 372xpg and the MS 461 arctic. I like to have lots of power, and do use the saw in winter and snow. I'll be using a 18-20 inch...

This is what i did for baby dump trailer, 3.5 bore X 24 stroke, same size s my load trail 5 X 10 dump trailer. Cost of brand new cylindre 340$ + 20$ for 2 brackets and pins.

These are some trailers that i've made, just for the fun of it:D

I'm presently shopping around for a new mig and plasma cutter. I previously had a miller 211mvp and spectrum 375 plasma cutter. Wanting to upgrade, i sold both...but too fast as all i have left is my lincoln buzz-box, and i have a few trailers to build, as well as a dump box for my Duramax. I...

HI all:thumbsup: Well with the sun starting to show itself my dad and I have started to get tractor fever again:laughing: Anyways our current tractor is a CK30 gear TLB, and we are looking at a DK50SEC, but the dealer (Distribution Payeur in the eastern townships) told us about th RX6010 with...

I like to blow more than to plow, but plowing is way faster, unless there's 2+ feet of snow. Blowers rule:thumbsup:

I like to blow more than to plow, but plowing is way faster, unless there's 2+ feet of snow. Blowers rule:thumbsup:

Actually the Puma isn't a budget blower, same thing as a regular Pronovost but without the chain garde, semi-ind chute, bolted wear bar, well that's the dealer had to say:rolleyes:. Could simply not justify the 1100$ difference. My CK30 is only a spare snow tractor. But now how's this blower

I have a pronovost Puma64 on my CK30 gear, and all i can say is that i'll entirely satisfied, this thing really blows snow and will last a very long time. Price isn't a thing to consider when wanting quality/durability in my op.

@ Johnk, i'm also a Husky guy, but due to crappy Husky dealer i decided to switch to Stihl. Here's my 2012 collection :D. 2013 on the way. I've been hearing about woods porting on chainsaws, anyone have a link to that, that way i'll get a Stihl to out performe a Husky:laughing:

Just felt like sharing this, but just got a brand new MS261 i'll add to the rest.:D

Well after having purchased my MS362, and found out it was a little underpowered, i decided to buy something with a little more power. So here it is a brand new MS441.

Hi guys! Juste felt like sharing this, but i've recently changed pack, left Husky for Stihl. I usally change my 3 saws yearly, but this time it won't be at the husky dealer. Something he said :shocked: pushed me to go somewhere else where my $$$ is good and welcomed:thumbsup: Any how , i have...

Thanks, waiting for the quotes, gonna shop around a bit cause these things aren't cheap. Meanwhile these are some things i built with my 211 to pass time:thumbsup:.

Hi everyone! I need advice on the purchase of a new welder. I am looking into either of these brands; Miller shopmate 300DX,Lincoln Power Mig 350MP, and Esab Multimaster 300, that's what is available around where i'm from. I currently have a Millermatic 211MVP mig, Lincoln SP-100 mig and...

I have just finished building my own cab for my tractor, everything is completed, but one thing remains to be done. The heater has been installed, but i don't know where to plug the heater hoses, also should i remouve the thermostate and change to something hotter:confused: Any help is welcomed...

With winter on it's way, and having sold the DK45SEC i had no other option than to custom build a cab. My cab will and must have the following; -Heater -Front and rear wiper -Front and rear cab lights -Dome lamp -Lower than the Rops ( Rops cut down 11 inchs upon purchase) -A radio -Must...

I have a 2010 CK30 gear TLB with a hydraulic problem. When cold the tractor can lift a bucket of dirt with the fel no problem, digging power of BH is good. Once the tractor is warmed up ( after 20min) the tractor has less strength and can barely handle a bucket of sand with the BH, making...

I Know it's kind of a bit early to start talking bout snow removal, since summer just sarted to show it's face:laughing: I plan on getting a 2nd tractor for snow removal contracts. I will only do residential driveways, since me and my father work from 8-5 and have to get up real early to plow...

Hi everybody, I have a 2010 CK30 with 200hrs, for sometime i have been experiencing hard shuttle shifting. I push the lever in either direction and it doesn't engage completely and when i realese the clutch you can hear the gears grind:( Same thing randomly happens when i put the tractor in...

Greetings everyone, I am presently looking to purchase a backhoe for my CK30, but at the same time managed to come across a 1990 IHI IS30G2 excavator. Never heard of IHI before:confused: Low hours, cab, dozer blade, and steel tracks, for about the price of a backhoe:) But before a make a choice...

Hi everyone, looking to put a backhoe on my CK30 gear 2010. What set-up do you have. Been looking for the wallenstein GX720, kioti KB2475, both are 7 foot backhoe with 16'' bucket and subframes. Quite pricy around here 7500$ kioti, $8200 wallenstein. I was also offered a Kelley 7 foot 3pt...

Hi everyone, i was just looking at the new boomer 30 and was just wondering who makes them for NH:confused: They surely don't look like the NH i used to have. The loader joystick is cable driven to the control valve, the hood is flat, no specs of who makes their engines.

Hi everyone, i'm presently trying to figure whether i install a kioti cab on my CK30 gear, or i trade in my ck30 for a DK35 hst with oem cab. From where i am the cab is around 8000 installed, and if i trade in my CK30 for the DK35 it's around 13000$ i have to shell out:confused2: The tractor is...

Hi guys I need some advice on buying my next tractor:drool:, looking for the ck20s or the kubota 2320. Both will have the HST tranny, loader, backhoe (maybe, still have to convince my wife:confused2:) box blade, and a snowblower.(front or rear haven't made up my mind yet. Never had a front...

Hi everyone, i presently have a ck30 gear model, and i'm looking to buy another kioti. The model considered is the DK35 gear:drool:, any feedback from anyone who has one would be appreciated. I love my CK30, but i so wish it would have a middle range.

Hi everyone, just looked at the kioti web site, a new DS model will be arriving soon; DS3510. Anyone know anything about this?:confused:, the kioti web site has no info on it.

Hi everyone, i'm a new member here, ready to explore TBN. This i just a wounderful site, keep up the work.