Search results

Here is something else for thought. the model TC40DA year 03 through end of production I think 06 shows a smaller oil cooler than is listed for the T2310-T2330 series. The T series coolers take up the full size of the engine radiator. attached is a pic of the smaller cooler. Here is a theory...

Here is a pic of the current filter on the unit and the area where i removed the filter head. Just a note you can remove the filter head with loader and frame on tractor you just have to have long arms and patience.

Took the tractor apart yesterday afternoon and here are my findings. HST has been bypassing for some time looks like judging on the pitts seen in the picture of the filter head. The two part numbers I gave are indeed two part numbers but are really the same spring. The tractor has 380 hours on...

Below is what the service manual says about the bypass. and the direction of fluid through the unit. Im not planning on taking the time to make a custom banjo bolt like the book says. If I install new spring and ball and problem is not resolved I will bypass with hoses the hst cooler to see if...

Im sorry I didnt get the jacket looking forward to that HAHA. Here are some pics even though I can no longer belong to the kubota club. There is a broken three point linkage on the tractor but nxt monday the dealer is making everything right. \ I really like the tractor so far lots of power.

Im leaving club orange and am now in club blue. I traded a kubota b2320 for a used T2310 plus some cash. just got tractor home tonight and i really like it! Tractor is Hydro with one rear remote and NHTL250 loader with 365 hours.

About a year ago I started looking at trading my current tractor. Today I've made my mind up on going with the following. My operations are beef cattle of the small scale and general farm work. I have been getting pricing from two dealers one in KY, Barlows and a local one in NC. The NC guy is...

Does anyone have one of these units yet? The specs are really impressive. I have friend with a workmaster75 and he really likes it. He uses it on a beef cattle operation. I know there are other options out there just feeling out what others think. To me they look like a lot of Tractor for the...

I was at the Kubota dealer today and they asked me if they could come look at my tractor and give me a actual quote of value. Heres what I got B2320HST R4's LA304 loader, Land pride RTR0550 tiller,BB1548, hardee brand 48'' bush hog. I bought the tractor with the idea of using it on our larger...

So checking over tractor doing greasing rounds and I notice this.the wear on the housing is cause by a loose ball connection on a cheap 3 point auger I lent from a friend. No big deal I can replace the housing. I found a high spot on the casting of the auger pto shaft coupler so I'll gringo it...

Ray, Im not sure how mech. you are If I still lived in PA Id be temped to come help you. I love wrenching on tractors. attached are two kubota parts list so you know what your up against and what parts you would need to replace. hope they images come through other wise ill try it again.

Im working on getting our cattle operation up and going and have been doing lots of reading about trailers. Ive have scoured craigslist and other sale papers trying to figure out what is best. Below is a list of things id like the trailer to be capable of. >Haul 4/5 beef cattle at one time to...

I have loved the B2320 we bought new in 2011 but im at a cross roads of sorts. We bought a home place with 20 acres mainly fields and some woods with a half mile drive the will need work in the years to come. I would like the abllity to plow and disc fields to plant better pasture grasses for...

So in our new homeplace and out bush hogging tonight when an suv rolls down our road. (Over 1/2 mile long.) They see me so they stop and get out. They ask if they could fish I said not tonight I'm cutting the chest high grass around the lake. I said if Im around its ok. Then they asked if they...

Well the family and I moved to our new home place 19 acres. Half pasture half wooded. I have a b2320 and have been looking at bush hogs. I know manufacutre says 48" for hp and weight reasons. I'm looking a a bush hog sq148 if I can find one seems they stoped making this model. Or a bh14 48"...

So we sold our place and are moving to friends house until we find something else They have plenty of land to store my stuff tractor implements ect. But nothing under roof. Should I buy a good quality canvas tarp and cover my tractor? I know tractors are ment to be outside ect. I was just...

wife and I found a farm that has almost everything on our list that we are looking for. eight stall horse barn, pole barn the barns are older but one has a new roof. The house is about 3200 sq feet. built in 76' and needs updated but, very liveable and useable. There are three fenced...

Well My two saw plan is complete last night I bought a 372xp from my local dealer. He was a little further out of the way than the other dealer but so much nicer to work with. I ran the 372xp a little just for break in she fired right up and sounds strong from the get go. I know the 346xp I...

Well I started poking around wondering about oil for my tractor. I got to wondering who makes kub oil. I looked up the msds and looks like ashland makes kub. Branded oil. The part number matches the jug I have left over from the first oil change. 10001 Let me know if the link works or not...

well looking at getting a bush hog for me B2320. My uses are clearing woods trails cuting sapling and underbrush. Im looking at the Bush hog brand SQ148 and land pride RCR1548 or a 1248 Any Ideas or feed back on either of these models? I dont line how the LP RCR1548 had a rubber wheel in...

well I emailed messicks about a valve kit for top&tilt. Here are the part numbers he gave me. Im wondering if this is the kit that mounts on the rops or something different? You need B7309B (1st position valve and hose) - $700 BL7343 Stacking Kit - $50 BL7373 detent valve - $380 Or...

Im sure I will get answer across the board on this one. I like wearing usa made boots and ones that are resoleable. I have worn timberlands, rockys, wolverines, Keens, Red wings all of which have not held up to my job. The soles come off the leather tears in the toe area. Im currently wearing a...

I have been considering lately if I should sell my 05 F150 STX 4wd and go back to a more simple truck. I like basic! My first truck was a 94 F150 5speed with a straight six. That truck was bullet proof. It wasnt rust proof though... The trucks Im considering are the 93-97 250s and 350s. The...

So I built a 12x16 pole building off of my 12x16 storage shed. With winter nearing I have been thinking about storing the tractor in the shed not under the pole structure. I do my service work on the tractor in the shed but Im afraid it may have bad effects on the sheds sub structure. The sub...

well fall is here and i decided it was time to try and get some grass to grow on the front part of our property. Im not looking for fancy manicured grass just grass. The B2320 did great as did the tiller! I did almost stall the tractor twice i didnt have the rpms high enough and i hit a very...

so the Labonvills arrived a day early. They are very nice quality and the fit is great. I do however have a question for owners of chainsaw chaps. I measure like the site said to ect. but I was worried these are not long enough. They cover the top of my steel toe hikers. but my pants stick out...

I have some questions, everyone keeps telling me this stuff is much better than normal oil ect. However I was going to run husky xp oil in my new saw for break in. The dealer gave me some optilube2 when i bought the saw. The rating is E-GD++ which is stated as the highest rated oil? what are...

I have a question for the chain saw pros. Up until now i have not had chainsaw chaps. Dumb Idea I know. With our new woodstove and the ammount of wood i cut chaps are a must... I have been looking at the Labonville chaps reg. or the full wrap one. does anyone have any input on these chaps or...

i know many people have complained about their HST peadal on the B's not returning to center all the time. this is typicaly more pronounced when the temps are freezing outside. One always has to make sure you lube the pivot points but even at that the pedal is sometimes sluggish. I was...

alright guys ive had enough im *@#$ ! so the wife and i go out on the boat this after noon we are both gettting the boat set back in in spot ect when the neighbor kid who is 14 is continuallly peelling out on the gravel road that i work so hard to maintain with my tractor. :mad: Im very...

Im in need of a long gun safe... I know some of ppl around is know i hunt and have guns just from them seeing me going on outings.. I really want the safe so that the guns are locked up when im at work and the wife is home alone... I have under ten guns currently at this residence and maybe only...

Well eight months ago i had the saw gaskets replaced at the local husky dealer. I though it would be under warenty but it was not. I asked the dealer while i was there if there was anything i could do to help this from happening agian. He told me to run fresh fuel and use stabil-ethonal...

I have a question for you guys I found wwf at a local supplier on sale for 1.79 a gallon. My question is I was going to go with the -20 stuff but isnt that over kill for living in NC? If I stilled lived in PA i would def go with the -20. any thoughts>?

Does anyone on here have one of these saws? looks interesting but id be worried about the auto not working in the long term? im ready to step up to the xp line up just still weighing all my options

I have lots of hilly terian i use the tractor on and really think the use of front weights would help doing tilling work and bb work. I didnt want to always have the loader attached while doing these tasks. This is my solution... on the cheap! This is the start of my project. All materials used...

I just can up from the shop and snapped a few pics. I found 6bolts loose on the sub frame. three on each side. My original complaint was that the right side of the loader sat higher than the left. these pics and bolt holes agree with why the bucket is not level. Like others have said before and...

Well as we all know the economy is not so great. I bought our home in 2010 it is a three acre lot with aprox. a 1300sq foot house. the house is in good shape and I have done lots of upgrades. kitchen, bathrooms added a Vermont castings wood stove. removal of popcorn ceilings ect. My wife and...

Well i know its the end of February and most of you are far from planting but in NC the growing season has already started for some. Being from PA its weird to me to be tilling a garden in early march. In preparation for the early growing season I brought the tiller up into the shop to find the...

I have a pole building My Dad and I made last summer. I also have a enclosed shed that the tractor will fit it. The problem is the tractor will not fit with the shed with the loader on or other attachments. My question is it better to store the tractor inside and just hook up to the implements...

I have been leaning towards the 346xp but I am curious if those of you that have it think it would have plenty of power to fall 20-24 oaks? I typically dont cut anything that big but I have some huge trees on my property. I want a saw that is real quality not a lowes special. I will be...

I noticed after I parked my tractor tonight that there was some sediment in the bottom of the filter bowl. The manual states not to service it until 100hours Im currently at 24hours. what would you guys do? I think Ill just service it now but have others seen build up this quickly? Im...

I priced a remote kit from kubota and Im not willing to pay the 700.00. I have a top link and a valve picked out from surplus center but I want to make sure Im getting the right valve..does someone have a spec sheet from the kubota kit that shows what the valve configuration is? below is the...

I priced the remote kit from kubota and Im not willing to pay the 700.00. I have a top link and a valve picked out from surpluss center but I want to make sure Im getting the right valve..does someone have a spec sheet from the kubota kit that shows what the valve configuration is? below is the...

I have been looking at pto generators all use 540rpm. My thoughts are can, I use my 960rpm setting on my pto to run at a lower motor rpm and still get to 540 rpm at the PTO I dont want to load the tractor to much but this was just a thought I had.. thanks for any input..

Well I used my tiller for the first time last evening. The 2320 has more than enough power to run the tiller.. i ran out of traction before hp. First time i ran the tractor at rated rpm for pto speeds... going to do some driveway work today..

Well heres a pic.. thanks all tbn users for ur input.

While waiting on my B2320 I decided to build a 16x16 lean two off the back of my current shed. The plans are to store one cord of fire wood under the 4 foot overhang. Then the tractor and implements under the remainder. The post are set now going to pick up the lumber and sheeting... here is...

Hello all, I have been snooping around here a lot lately and have decided to order before the zero percent is gone.. :D I sent Credit app. to Brady at Barlows. I will have a few days to decide what options to go with... this is the package so far 2320 HST with R4's FEL(LA304) BB LP 1548 My...

What is a good size box blade for the B tractors? I know its best to try and cover your rear tire track width. I saw one user here using a Land Pride BB0548 on a B2920. While other users have used a BX size blade... on a B. My thoughts are to add the box blade to the price of the tractor up...

Hello all, Im new to the site but have been trying to find a tractor for my property,it is three acres. Most of the property is hilly. I have never had a new style compact tractor. I worked on a ranch in FL where i used a JD4455 and a smaller ford tractor. i have a garden now but would...