Search results

Hi there, just wondering if anyone would have the grease fitting size for KL 6010 loader on my NX4510 ? Thanks Kevin

Hi Folks I have a NX4510 and bought a snow blade for the front end, just wondering if anyone has applied front weights to their tractor because when the snow is heavy while plowing sometimes the tractor slides to the left or right opposite to the angle especially when going up hill and feels...

Hi Guys, I am thinking about getting someone to make me a sort of jig made of steel framing to sit my backhoe on. For 10 years I have backed my Kioti CK25 into the back of the garage drop my backhoe on a trolly and tie a couple of chains to the framing studs on the back wall and pull away, well...

Hi Guys, I am thinking about getting someone to make me a sort of jig made of steel framing to sit my backhoe on. For 10 years I have backed my Kioti CK25 into the back of the garage drop my backhoe on a trolley and tie a couple of chains to the framing studs on the back wall and pull away, well...

Hi there, I guess I bragged too quick. The tractor will not start, just keeps repeated clicking from the relay I just replaced (not it), lots of battery. Any ideas ? Thanks

Does anyone have any trouble shifting their HST into medium range. It's been like that since I got it last year, got a 160 hrs on it and it is starting to get to me. Sometimes (rarely) will slip in but 90% of the time I'm rolling the gear shift back and forth trying to jam it in place only...

Just finished installing my rear LED lights and figured I may as well switch the tail lights also they were only $25 when they were on sale at Princess Auto.

I'm impressed :) and got 2 more going on the back. Eric you're an inspiration to upgrading. Oh and just as a foot note to the tool's opinion :this tractor may be a tool to people for work and I respect that but don't tell me that my tractor can't be a toy for work and play. Big boys like big...

It's almost like the Tide commercial "I can see the difference can you see the difference"

Just eased out the plastic pins out of the liner and bingo there it is. all the wiring the connectors were easy and 1,2, 3 same with the other side.

I have been a member of this forum for the past 10 years and the people here have always been there to help when I needed it so I'm semi-retired now and I would like to share and help whenever I can. I know there has been a few threads of LED light installations. This is my installation of 45...

I started a new thread because there are a few pics I think you'd enjoy but I have to send them each in a separate post because of their size. See how this works. Kevin

Just thought I'd share the news with my friends on TractorByNet. Traded my 2004 CK25 HST for the new 2014 NX 4510 Cab HST, its actually more exciting than getting a new car or truck. Had my CK25 for 10 years and any problems I had with it over the years I was able to fix them with the help from...

Hi there, would someone have a copy of a Kioti tiller(60') user manual ? Cant find mine. Thanks Kevin

Hi folks, My 2004 ck25 has a fluctuating idle and stalls when I accelerate or lift or move the bucket. I cleaned my fuel filter and changed my air filter. Any suggestions to help diagnose my problem would be greatly appreciated. Thanks Kevin

Hi there, I have a new (Indak) switch for my heater fan 3 speed (but only need 2). Five push on terminals labelled L- M- H-B-C . Can someone tell me what wire goes where ? Thanks Kevin

Hi folks, I'm looking for a little help here. I installed a heater I got with my cab from Simms. Last January someone thought they would do a dirty deed (a young mechanic who thought I wouldn't know the difference - can't prove it) and pull off both my hoses connected to the heater and then...

Can anyone help with an easier process to get my antifreeze to circulate. (I believe my heater was tampered with to give me this problem. They just pulled the hoses off from the heater enough to allow an air gap) I have a cab heater in a Kioti Ck25 and it was a bugger to get heat to it when I...

Hi Guys, As promised the following is a sequence of steps pic by pic upon delivery & installation of my new KB2475 Kioti Backhoe. I hope this works. I had to reduce the resolution of each pic. Enjoy. This first one is the arrival.

I am getting a new KB2475 backhoe for my CK25. Could someone tell me what's necessary as far as hydraulic kits go. the dealer mentioned an additional remote connection in case I want to run something else off the back but says the backhoe will work without it. I am looking for the easiest way to...

Once again - problem solved thanks to all who posted and Tractorbynet.com. I removed the seat and the 2 bolts that hold in the Joystick box and your right, it was a bugger getting that boot lifted. For those of you who have to do this, there is a lip on the rubber that is tucked under the bottom...

Hi Folks, Been a while since I posted. I am an avid reader of the site tho. I have a problem with the joystick ! By the way I always enter & exit on the left. When I push it down to float the bucket the stick keeps turning like it is going to come off. I have read where the plastic ball inside...

I have my tiller on my Kioti ck25 rear 3 point hitch. I have it lifted up as far as it will go but when I go to lower it to the ground it won't move -stays up, even after I shut the motor off - the hydraulics still won't release it. Anyone have any ideas. Thanks. Kiotikevin

Is there a wear blade (metal) available for loader buckets. Such as the same set-up as a universal bolt-on toothbar for a 60 inch bucket so that I can just take the toothbar off and replace it with a wear blade for snow removal on my (200 ft.)paved driveway. We didn't have that much snow last...

Hi folks, My neighbor has asked me to check out any information I can find on Task Master Tractors. There is a dealer in our area (Cape Breton, Nova Scotia) and they are fairly cheap. Just wondering if anyone can provide me with any info on this product ? Thanks Kevin

Hi folks. Has anyone installed a heater in a ck25/30. I got one from Sims Cabs. Shouldn't be any trouble to install the adapter and gooseneck at the thermostat. Can't figure out how to cut the radiator hose at the bottom and exactly what adapter goes in there. Could someone send me a pic of...

Today's Cape Breton Post - front page news. A guy was driving along the side of the highway yesterday and rolled off into the ditch. Amazingly he was pinned under it and still recieved no injuries. Someone was watching over him. I believe it is so important to pass these reports on to as many...

Hi Folks, Last year I installed a couple of double 55 watt flood lights on my ROPS and had to install a relay with the help of my good friends here and now I just finished installing a new cab. I have taken the lights off of the ROPS and installed them on the front of the cab. After I hooked...

Hi guys & gals, Hello from Cape Breton .............. I have been out of touch since the spring but back in the seat again. I ordered my cab for my ck 25 yesterday and will have it on Monday. I am going to look for a heater for it this weekend. By the way, for those of you who can recall, I will...

Hi Folks, I bought a 2000lb winch for my ck25, figuring there must some place to mount it on the front. It's just a simple cable winch, the type you would find on an atv or small truck. Any suggestions along with wiring would be greatly appreciated. Thanks Kevin

As some may remember my Post in January 'My ck25 HST stalling' , I tried the increase in rpms; it seemed ok after that but I still insisted the dealer check the pressure in the HST. The dealer's mechanic was here the day before yesterday and did a pressure test on the transmission and got...

When I turn my tractor off, I leave my loader and my rear implement raised. After it shuts down, then I lower both of them to the ground (I am assuming) to relieve the pressure off of the lines and pump ?? Question - if I lower my loader and or implement to the ground before I shut the engine...

I know - it's a never ending subject but one has to apply the HST answers to their own unique situation. I'm looking for some help, please ? I run in medium range but I really have to work it by taking run at the snow and when I get too much to move it stalls. This particular day we had...

Hey guys, I think I just about got the wife convinced to get a cab for my CK25. I've seen the one on the CK20 (Simms) but I't probably may look quite different on a Ck25. I prefer the Simms over Curtis. just on the rear glass alone. If you know anyone who has one and will let you take some...

Hey Guys, I just need to clarify a couple of issues keeping in mind I have never owned a tractor in my life and I'm learning as I go thanks to everyone here on TBN. I need to change my Transmission oil and filters. 1. Is the Transmission oil and Hydraulic oil the same thing ? 2. Do I have to...

Just thought I would share a couple of pics with everyone. I have to build a piece on my garage (24x30) because I have no room for my car & Jimmy. My Kioti CK25 & impliments as well as my boat have me kinda crowded.

Hey guys, I installed a set of flood lights on my ROPS on my Kioti CK25. 2 double 55w lights. I had a 50 amp toggle switch with a wire feed directly from the battery with an inline fuse (20amp) holder just before the switch. 220 watts of light for about 30 minutes - lights wouldn't shut off...

Has there been roll over tests done by any government or non-government safety agency for tractor ROPS? Is there statistics available to the public ? Is there a thread on this ? Kevin

Here\'s My CK25 Hi Guys, Sorry it took so long to post these pics. Thanks to Kioti John, I can post high resolution pics in the Webshots Web site. I hope this works out.The first set of pics are at the dealer. My Ck25 sitting next to the CK20. When the tractor first came in, I drove 3 hours to...

Hi guys, Just wondering if anyone is having any trouble getting Kioti Impliments directly from Kioti. I ordered a RFMower when I ordered my CK25 on April 28/04; I got my tractor last week and still no Mower. I also ordered a Rotary Cutter 3 weeks ago and still nothing ! My dealer and another...

Hi Guys, Well, I finally took delivery of my Brand Spanking New Kioti CK25 with FEL. Wow what a machine, I will tell more later and post some pics on the Kioti forum. Meanwhile, I am hooking up some extra lighting to the ROPS and back-up work lights. If any dealers, owners or anyone familiar...

What\'s The Difference ? I am shopping for a second hand Bush Hog (not the brand name) but something to knock down 8ft alders. I am only new at this while I await delivery of my new Kioti CK25 I am trying to understand the proper terminology for impliments. I see there is finish mowers - rotary...

Well I just want to share my excitement with everybody. I got a brand new Grandchild (girl)and a brand new Kioti CK25 the same day. If wasn't for everyone here, I wouldn't have made such a good choice in buying this tractor. To put it all in perspective - it is an 'AWSOME' machine. It turned out...