Search results

I have a Kioti CK20 w/KL120 loader. Just noticed a pinhole sized leak coming fro one of the lines running to loader. I found it bh pulling back protective mesh. Has anyine replaced these lines? I'm wondering how hard it would be to feed the hose thru loader arm. Does new mesh come with line...

I recently picked up a pre-owned 60" finish mower. I'm not sure of the brand & there's no markings indicating it's make. The mower cuts fine, but noticed (after running a while) oil seeping out of fill cap on top. I unscrewed the cap & noticed the oil is filled nearly to the top.Is gearbox...

As mentioned in another thread I'm going to look at a pre-owned Woods finish mower this weekend. I plan on checking gear oil prior to running. Below is from to Woods' website: Fill Gearbox 1. Make sure vent plug hole is clear. Fill gearbox halffull with high quality gear oil that has a viscosity...

I'm going to check out a pre-owned Woods RDC54 finish mower this weekend. My tractor is a Cat1. & the Woods RDC54 is a "Limited Cat1". Will I have a problem with fitment? Also, what should I look for when checking the mower? Should I check gear oil on site? Other than hooking to a tractor...

I'm considering a 60" finish mower & thought about the KingKutter (CountyLine) at Tractor Supply. Thru my research it appears TSC will no longer carry KK, but going with Tarter (as far as finish mowers). Do I buy a KK mower thats in stock? Or wait until the Tarter line shows up at TSC? I'm not...

Last year I posted a smiliar question on running a finish mower w/my CK20HST. Now that I'm ready to buy my concern is: Will the CK20HST perform well with a 60" finish mower? I called a few places & some said "Yes" while others said "The CK20 w/HST is borderline for a 60" finish mower". I've...

We recently bought a Phd for the compact tractor & it's working out great. My question is: How does everyone store their Phd when not in use? Should I take it off & lie it down? Hang it from a stud in the barn? How long could I leave it hang on the back of the tractor? Thanks

I have a CK20 w/loaded R4's & would like to buy a 60" finish mower. Question is: will this be too heavy of a machine for front yard? Will it make ruts & compact soil?

My dad has a late 60's early 70's IH Cub Lo Boy that's been pouring out gas from the side of carb. (where the breather tube attaches). Engine cranks but just won't turn over. I thought the problem was with the carb.(needle valve or gasket) & bought & installed a rebuild kit. I put the carb...

A few weeks ago my brother was running the Lo-Boy 154 w/pull behind mower when the machine wouldn't move. I climbed underneath to find the drive shaft moved forward & removed from rear end. It looks like a bolt in the front runs thru a yoke? then thru the shaft. This bolt is missing. I tried...

Hello, I'm a proud owner of a new Kioti CK20S HST. I took the machine out today for the first time. I tried to move a few piles of fill (mostly dirt/grass). Here's the problem: As soon as the teeth on the bucket touches the pile the tires spin! I have no traction & can't dig into the pile...