Search results

Wherre are you located at? Maybe someone can suggest a good dealer near you?

Wow crazy they couldn’t fix it. Congrats on the new tractor though. Mine is still running great.

Has your dealer installed a new harness yet? Has it been fixed or are you still having issues? Mine now has 20 hours on it and all good.

Does your tractor have a dial you turn to adjust the rate of drop on your 3 point? It’s usually just in front/below the seat. Turn it all the way in and lift the 3 point all the way up. That should lock the 3 point in place. Not sure if your mmm will lower still but you can try?

Got my new radio installed tonight. Between the speakers and radio WOW. what a difference. For a tractor I’m all set now. Very happy.

You all were correct. The speakers SUCKED! I swapped them out for these 4” Polk ones. Much better sound. I wanted to go to a 5” speaker but I was afraid to cut/dremal the whole bigger to fit them. I have the same radio recommended above on the way. It’s 50 watts/channel so that should be much...

Yup it is definitely there. Crazy how far technology has come.

I was reading my owners manual tonight. XR3140HC. It shows a “fuel heater” fuse. What is that? Are they referring to the glow plugs? I also read about the sensor on the fuel filter that plugs in but I’m guessing that’s a sensor for water? I tried to google this but came up empty. Here is a pic...

Spoke with my dealer again today. I just had some other questions about the tractor. He asked me how the tractor was doing. I got a couple more hours on it and still no codes and running great. He said he had talked to LS today about my tractor. LS is gonna add changing the software in the Ecu...

Next update.... I was able to use the tractor 3 separate time today for a total of about 2 hours. No code ever popped up! I would average 2-3 codes per hour so to go 2 hours with no code I’m hopeful it’s fixed. He said they also checked/tightened the grounds too. So some software changes and...

Very interesting thread. I wasn’t aware a “pallet grapple” existed. I have a set of pallet forks on order from EA. I also had the 3rd function installed on my new tractor in anticipation of a grapple one day. I’m honestly not sure how much use I have for a grapple but think they are awesome. Put...

My Rpm did that same thing when limp mode kicked in. 1300 and then when brakes are pressed it lowers. Let off brake and back up to 1300.

Next update. The dealer came to my house today and changed the software. There is another tractor he sold (was a MT3-42) that had the same code. A lot of LS tractors have this same engine just with different tuning. It had the newest updated software in it. They redid the software to the next...

Well.......it’s half way fixed. The one code is totally gone now. The other code still pops up at times. Saw it about 5-6 times in 2 hours of operation grading my driveway. It pops up for a short time then just goes away. Only stays on for about 10-30 seconds. Twice it caused it to go into limp...

Yes sir. Its summerix. While searching for a new tractor I heard great things about the service there. I could of bought my tractor for about $600 less at Ebels but service matters more than saving a few bucks to me.

Interesting. The dealer came to my house and put a new crank sensor in. I’ll be getting back from out of town tomorrow. Should be able to test it out on Sunday. I’m thinking the smoke was from it being brand new maybe? How often do these codes pop up? Every time you use the tractor? The 2 times...

Quick update. Dealer called me this morning. as PCABE5 said its a crank sensor error. Either not plugged in all the way, positioned wrong or just bad. Dealer will be at my house next week with new part to install if needed. He said he would come today but im heading out of town for vaca so i...

He will answer the phone up till 10pm 7 days a week! He delivers every tractor sold and comes and picks it up if any service needed. That’s the main reason I bought from him. And I’m an hour and half away from him.

Other code

Just took delivery of a new XR3140hc today. After work I went out to drive it around and get used to it. Love the lighting! But after about 10 minutes the rpms went from 1800 down to 1300 all on its own and the throttle wouldn’t do anything. Set the parking brake and rpm go down to 800. Release...

I saw this on the LS website today. Is a free loader a special deal currently or is that something LS has always done? I’m still working out the final details on a new tractor and wanna make sure I’m not missing a discount. Lol.

Thank you all for the replies. Very helpful. Clearly I’ll need better speakers at minimum. I was just looking at the parts list on the new website. It does show Bluetooth. No clue if that what I’ll get or not?

Any reviews of the radio system? I’m getting a XR3135 or XR3140 cab tractor. When I test drove them there was no radio installed but it will come with it. Brand? Bluetooth at all? Speakers sound good? I can always upgrade the receiver and speakers if needed. I probably won’t use it much but my...

Is the whole XR series going away or the xr41xx? I’m working on a deal for a xr3140 but I wasn’t aware a newer series was out?

How were you moving snow? Blade or blower? Did you need chains at all? I use a rear snowblower and my current tractor MUST have chains or it goes no where. The dealer said I wouldn’t need chains on the xr3135?

I went and checked out the xr3135hc at sumerix today. I was highly impressed with Ivan the owner. Me and the wife test drove it. My 1st instinct when I sat in it was that I didn’t like the ergonomics. It felt like the steering wheel needed to telescope out. Wife thought the same thing. The...

Thanks for the info. That’s the same dealer I’ll be going to on Tuesday.

Good info. I’m in research mode and this tractor is at the top of my list. On paper it seems like a bargain compared similar tractors of different colors. I have a Yanmar sx3100 currently. I want to upgrade to a slightly larger cab tractor as I’m tired of freezing in the winter snow blowing...

I have the sx3100 tractor with DS 60 mower deck. I have been mowing with it for 5 years now so I figured I should change the belt. I never received a manual when I bought it. I got a bit confused when I tried to change it today. Im assuming I have to remove the gearbox in order to do this. Is...

My sx3100 has developed a leak in the high pressure metal line. Anytime I move the joystick it squirts out. I ordered a new line and it showed up today. I think I’ll just take the Tractor to my local dealer (non yanmar) as my closest yanmar dealer it 2.5 hours away. It appears the rear tire...

I was just checking the dimensions of the yt235 non-cab and cab. I always assumed the cab version would be the same height as the non-cab with the ropes up? Turns out that's not the case. The non cab versions height is 89". The cab version lists 83.6 and these are both with R4 tires. This got me...

I picked up these pallet forks today. I had been searching all over and had found a couple places online that could make me a set. The problem with that was they were all over $900 and heavier then I wanted. Finally my dealer had a set that were for the new SA series tractors(same quick attach...

Does anyone have the front weight bracket on a sx3100 and if so do you like it? Can you use it and the loader at the same time? I am thinking about adding one for this winter to help with steering. I run a 60" Rear blower most of the time but also have a plow on the loader arms I use sometimes...

I installed my mulch kit today. Here are a few pics. The stock blades must be a real high lift blade? There is quite the angle on the end. The plug on the deck is attached with 2 bolts. The rearward bolt would require to take of the anti scalp wheel in order to get the nut that came with it on...

Here is a pic from the catalog I got today. It shows that part number. I haven't ordered it yet or priced it out. I was afraid it would be the kit that required installing the baffles under the deck. I wonder if removing the baffles from the deck was part of how they improved them and came up...

Yes that was the correct number for the 48" fabricated deck. I will have to order it as they only had the 48" non fabricated deck kit in stock. I also got the full line 2017 accessory catalog as they just received them today! I now own the GT48DXLS mower. I have 5 acres to mow with only 1 acre...

Well I want to swap the rear tires to widen my rear end. It will make it more stable and make using chains easier as well. I have had chains on it as is but the chains sometimes will hit the turnbuckles when my snowblower is on. My question is once I jack the rear up where can I put the jack...

I Have had my sx 3100 a little over two years now and I have never had my loader off. It is a lot easier to remove than my sc 2400 was and that wasn't bad at all. It sure was a lot nicer mowing with it off. My biggest part of my yard is about 2.5 acres and It took me 45 minutes less time because...

I have an sx3100. The cooling capacity shows 2.1 quarts? Can anyone confirm this? This seems very low to me. I just wanna make sure I have enough when I change it out soon. Sent from my iPhone using TractorByNet

Unattach from this bracket first? Sent from my iPhone using TractorByNet

Bought a used bl 2563 Kubota rear blower this fall. I put it to its first heavy use today. The blower was working great. Then I backed up into a pile of snow to hard and the auger quit spinning. I pulled it in my garage to change out a shear bolt and thankfully I picked some extra ones up. Well...

Bought a used bl 2563 Kubota rear blower this fall. I put it to its first heavy use today. The blower was working great. Then I backed up into a pile of snow to hard and the auger quit spinning. I pulled it in my garage to change out a shear bolt and thankfully I picked some extra ones up. Well...

Sent from my iPhone using TractorByNet

Sent from my iPhone using TractorByNet

Sent from my iPhone using TractorByNet

Have been looking all year for a used snowblower. Whenever one shows up on Craigslist you have to act fast. They are gone in 2 days tops. Well I got lucky last week and found one. It is a kubota brand so of course I repainted it to not lose any horsepower. So now I'll have a plow on front and...

The wife got me a early birthday present. Got them installed yesterday. Now I just need all this snow to melt so I can get to my box blade and try it out. Sent from my iPhone using TractorByNet

Here are a couple pics of the new chains. Sent from my iPhone using TractorByNet

I got a western suburbanite plow fitted with a QA for my tractor. Just got it wired up today and all is well. It has a hand held remote to angle the plow. I still have to order chains though. Hopefully the plow isn't to long(7' 4"). That will be a lot of snow to push when we get a big storm. I...

I have the rt65 with Honda engine. It is about 6 years old and has been great so far. I got it out to till up the weeds in my garden and started noticing there was about a 2 or 3 inch path where the weeds were not being touched. When I looked at the tines the whole rod that the tines attach to...

Well i finalized a deal today. Im trading in my sc 2400 with loader, deck and front blade for a sx 3100. I couldnt pass up the deal. I live in northern Michigan and this past winter we had alot of snow and I often got frustrated with the 2400. Overall I cant complain but i just needed something...

I have a sc 2400. I was at the dealer today to get a new set of blades for the mower. He asked if I wanted the regular blades or gator? I got the regular but now I'm wondering if I should try the gator blades. My only complaint about the mower is it dosent have a mulching kit. Would gator blades...

I recently went to start my 2400 to do some plowing. The engine wouldn't turn over. Glow plugs and lights all worked it just wouldn't turn over. It was like the brake wasn't pushed in. I searched for the saftey switch but couldn't find it so I called my dealer. They stated there was a bulletin...

Has anyone put a suspension seat on the sc 2400? I have just started looking and thought I would ask on here first. If you have please tell me which one and how easy the install went. I am also wondering if this will effect the seat saftey switch?

Do i need to get a block heater for the tractor? I live in northern michigan and the tractor is already getting harder to start and the temp today was about 35. It is stored outside not in a garage. When it first starts it idles at about 500 rpm's for about 10 seconds untill it warms up enough...