Search results

Hi Y'all. I have a case 580B CK backhoe which works great albeit a bit cumbersome. I have other tracked excavators so don't really need the backhoe BUT it is a great front loader. Mostly just move stuff around the farm and small building jobs so it doesn't get used really and is just sitting...

Got an old 580b and it runs great, only problem is, it has more leaks than a welsh farm. Worse one is between engine and torque converter. Seems like the problem was there before as it has some gunk stuck round the joint. Was OK but I just changed the water and milk for some nice oil and now it...

Hi, started the repaint and tarting up of the 835-ds, (which is basically a 35) and so far so good. If you are in europe have to recommend Tracteurbits.com for all old tractor parts. great service and very reasonably priced. Anyways, need a bit of help identifying the reason for two studs and...

Hi, got a massey 835 ds french version with a 23c 4 cylinder diesel. changed all the filters oil and new fuel and starts on the button but ticks over at 1200 rpm and smokes like hell. If I pull out the "stop" button some way it calms down and I can get it to tick over at 700 rpm and it stops...

Hi Guys, Took your advice and had my ram welded after snapping off the end. Made a jig and took it to a local engineering firm who had a million amp welder and did no trouble. Thing is after all this messing about i seem to have a put a ding in the piston. Nothing serious, looks like a finger...

Hi guys, looking for some advice. The stubby ram (1 of 2)which controls the slew on my backhoe has broken. The nut which is screwed onto the end of the ram part has snapped off. Should I drill and tap or try and weld the nut and threaded part back on. The ram shows about 1/8" of bare steel...

Hi, Anyone out there ever had any luck welding the end on a snapped ram. One of the slew (right, left) rams has unfortunatley snapped at the point the piston meets meets the eye to attach to the frame. It's a 1 1/4 inch piston in a 3" ram. theres plent of metal there to weld but I wondered if...

Hi, I have a backhoe on my b1700, works great all beit a little light. Using it the other day and noticed more sideways free movement than normal. The adjustment on the left ram to slew the backhoe has worked loose. There is a greased pin on the end of the ram which I don't think has been...

Hi, sorry to bore you all, but I am getting somewhere with this and it may help someone else. I installed a valve to isolate the FEL and hey, the 3 point hitch works a treat, doesnt lower by itself, and will lift what seems like a ton. However when the arms reach the upper limit the control...

Can anyone tell me where the pressure relief valve is on a B7001/B7100 Ta Pete

Can anyone tell me (or show me with a photo) how their front loader hydraulics connect to the tractor...I think mine is all wrong. Ta.. Pete

Hi, I've had my b7001 for 3 months now. With BH and FEL it is a godsend on my little fermette here in France. (Couldn't afford a large garden in the UK.) Backhoe is way powerful and the FEL is useful but I think there is a problem with the hydraulics. I see a lot of other people on the forum...