Search results

Tape will not prevent moisture getting in, solder creates a "rigid point" in the wire and is prone to brake on edge of solder regular heat shrink will not stop moisture Ive been there many times Ma Bell has been using scotch locks for years on the phone lines with the jelly in them to exclude...

2 years ago our cabin in the mountains of Central Pennsylvania burnt down here is the new one going up. 36 x 36 8' high with 8' attic trusses attic will be 20' x 36' long The opening is not a garage door it is picture window omitted to get stone and cement in. This is only their 2nd day on...

Amazon.com: NEW 12V 11T CW STARTER FITS RHINO 3320 3324 4134 HERCULES 2282 2284 TRACTOR QD1247A: Automotive

I use a kerosene siphon

Have here take lug with here they should have a screw type lug to replace it with if they don't go to a electrical supply store and ask them for one I would avoid aluminum set screw connectors as they will corrode fast. some thing like this ILSCO...

Here is an up date there is a way to add apps (I've done 2 so so far) on kindle fire hd. You have to have android phone or have source for the app (xxxx.APK file)you want. and a computer and cables to move the files from phone to kindle Down load es file explore app to the phone and to kindle...

water bar is name of them for roads it doesn't have to be that aggressive just an inch or so would work in the correct direction. tom

JDGirl I took some liberties with one of your pictures A quick test would be to make sure tractor is off and stopped and tie the 2 out board blades in position with a 1/4" expendable rope or 3 or 4 lengths of baler twine. Make sure no one else is around and start tractor put pto in gear...

From 2307 Will also need to look into adding some dirt banks or something at the driveway entrance to divert the water away from coming down the left side of the driveway and down behind the shed. put a small mound in drive called a water bar to direct water were you need it to go. or some...

I have a leak on my front axle I don't see what keeps the bearing and gear on. I disassembled it to change the upper bevel spindle seal and it stayed together. Did any one else have to change one??? tom

These bits are for sheet metal no thicker than the steps for sure use a hole saw. tom

I'd second the 4" grinder to sharpen them and then balance them with a cone thing. tom

Look at LED tape lights for under counter http://www.amazon.com/Lighting-EVER-Flexible-Waterproof-Ultimate/dp/B0085UPTJO/ref=sr_1_5?ie=UTF8&qid=1364022820&sr=8-5&keywords=led+strip+warm

mobile app for kindle i cant find one and search for"app" strikes out.

I have some scaffolding in the corner of my garage to stack stuff on. I'm keeping my eyes out for some used pallet rack and beams. I do have 2 bikecycle lift's from HF holding bikes up in the rafters. They might work for light john boat but change the rope the thin rope they supply gets...

this is the one I was thinking of tom

#210 is the breather I cant see how oil would get that far up. tom

BTW you have to click the "from url tab" in insert image pop up

click the picture icon = insert image after you start a new reply "it is the 3rd one from the right" paste the copied image location in the pop up. and finish post tom

OBED you are drawing down the storage in the well a little over 1 gallon per foot if its 6" at 17.6 gpm from the pump I think you are exceeding that flow with the sprinklers if they are the impulse ones I would set up one over a tarp on a hill and funnel it in to a 5 gallon bucket. and time...

Main Page - Open Source Ecology

I got some tractor time this week end after fixing a flat on a rear tire on my BX23 the valve stem was sheared off. I had a spare but it was my last one put that in set the bead and aired it up back tractoring. i was looking on line for new stems and came across these metal ones They are...

Has any one got one for their kids / or grand children and skipped the training wheel cycle all together?

I have a 2006 2500 ram ctd mega cab and the trailer turn/brakes stopped working there isn't any fuses for them just some electronic fuses in the fcm module to shut down if it go's over 15 amps and has to be reset by dealer (read this on line). Does any know of a good after market protector or...

I saw an idea on 3rrl post and though of the thread on whatisit so I started another one whatisit2 whatisit2 whatisit4 whatisit5 original thread http://www.tractorbynet.com/forums/related-topics/154486-whatsit.html

Is any one headed up there next week? tom

My wife noticed a soft spot in our floor it is a 2002 Flagstaff Shamrock hybrid. I drilled a hole in a compartment to see how the floor is made. Vinyl floor, 1/4" luan ply wood, 1" Styrofoam (white bead type) some type composite on bottom about 1/4" thick. I took up the sheet vinyl in the...

I tried the digital tv at my cabin and lost all my analog fuzzy (but acceptable) station in the conversion I did get 2 new stations one pbs with 3 channels and one independent with 2 channels. but there isn't any thing I want to watch on them. a new long range antenna will be ~ $150.00 and...

Can any one check these dimensions for me? http://www.tractorbynet.com/photos/data/500/BX23_BACKHOE_MOUNT_DIMENTIONS2.JPG and http://www.tractorbynet.com/photos/data/500/BX23HOEBUCKETSIDEMOUNT.JPG tom

I am looking at putting top and tilt on my tractor there isn't much room for the valve bank any suggestions / pictuers? I was thinking of a remote set up cable from handle to valves the hoses back to the T&T but am still at a loss were to mount it. tommu

I'm looking for one for my cabin. I get about 6 fuzy stations and 2 good ones on my roof top antenna on my tv now. Has any one got one yet? tell me the good bad and ugly! tommu

A friend put me on to it and I am going to try some this weekend any one else in to it? Any suggestions? Garmin gpsmap76s tommu

I finally got up there yesterday Pulled the tractor out same problem loader lifts but only go's down in float. I started checking lines for damage Ect. and found the next vice grip commercial. Then I started over with the hydraulic gauge I built. pressure doesn't drop in the lower side...

I keep getting this error in internet explorer 6.08. I did turn off the script debugging and notification on script error Does any one have a idea how to stop it? thanks tom

I went to use my tractor this weekend used it to get log splitter out it worked ok I went to use the loader and it would raise but not go down unless I hit float position. Backhoe nothing working, The loader bucket seems ok I put my test guage in line and am getting 1700+ psi to loader...

Here are some picture of my solar panel insulation after we had almost 3 inches of snow the day before. A mini of Robs insulation. only 250 watts so far. [/IMG] battery box Tom

I have a cabin as some will call it out in boonies. The well I got drilled last year only produces 1/2 gallon per minuet. So I figured i would need a cistern to get through and the best place was were the septic tank is presently (Its just in ground and not used yet). I had to dig it out...

Deere Completes Chinese Tractor Acquisition Manufacturing.Net - August 27, 2007 MOLINE, Ill. (AP) Deere & Co., one of the world's largest farm equipment makers, said Monday it completed its acquisition of China's Ningbo Benye Tractor & Automobile Manufacture Co. Ltd. Financial terms were...

Is any on familiar with these my norge heater at my cabin is on its last leg and I'm open to suggestions. no power to run normal heater. thanks tom

Dirty Jobs last night was putting a sign up in Tyler how come none of you guys down there didn't get a cameo? tommu56

For the umphteen time I got a flat this weekend on the rear of my bx23. It was spitting slime out a big hole as I was putting it away. I jacked it up and spun the hole down to the bottom and put a jack stand under it. Has any one else went with a "heaver" tire the shale I have keeps putting...

it keeps loging me out when i get it opened debugger and pasted it below tommu56 // ============================================================================= // vB_Popup_Menu methods /** * Initialize the control object */ vB_Popup_Menu.prototype.init_control = function(noimage) {...

I was talking to well driller yesterday he has a "pounder" type rigg the other person I have talked to have "rotary" type the pounder said the pounder is more costly per foot than the rotary and the pounder said he dosent have to go as deep because he fractuers the rock. The other cabin on the...

i dont get any current posts if i go the last xx hrs down. does any one else have same problem ? they are always 3 or 4 day ago?

I got my bx23 this summer and have used it alot and was looking at dump trailers was wondering what length any one else was using 14' is getting a little long and i have to stay under 7,000 gtw fro my truck (trailer will probibly rated heavier though)