Search results

On the front of the truck is a A frame tow bar built to bolt thru the bumper at the factory holes to mount the tow bar. It has a ring on the hitch to go on a pintle hitch. It was built just for these trucks.

This is the best pic I could find of the tilt front cab. It's the last of the international trucks and parts of my dads. If any one has interest or questions post response or PM me. Not trying to derail the question thread.

Does anyone know what the part # is for the Quick Hitch subframe for the boomer 54d? It fits the 72CBH front blade, broom and snow blower. Thanks

Just weld or bolt a ssqa plate to the back of your box blade.

What is the kind/brand or name of this connector? Its on a farmall 40. It is the one with 2 red wires, going to the fuse above the starter. Thanks

How is this?

Anti-stall, how does it work? What difference would/do you notice with it on vs it off? I posted in the New Holland forum and did not get any replies so I will try here. Maybe someone with anti stall on another brand could /would answer. lt190b

How does the anti-stall work? What difference would/do you notice with the switch off vs switch on?

How, and why to use this tab?

Sodo, thanks for your thoughts and artwork.The pictures you posted are the wheel side. The shaft is loose and probably never was tight The last 2 pictures are from the top,I hope these help?

This is it. (first picture) It is like the replacement one (#1) I have already put on. (second picture) is of the second failed one (#2) I am not real confident in this "new" fix. Time will tell. At least I have the original ones to hack up myself.

This is a caster yolk from my mower. Can you tell from the pictures if this is a welding failure or abuse?

Duerwood, is this motor, Char-Lynn 101-1750-009, what you would put on a cutter with an auxiliary standard flow of 20gpm and 3000psi on an excavator? Is the pressure from the ex too high?

Duerwood, what hydraulic motor would be a match for an auxiliary standard flow of 20gpm and 3000psi on an excavator and a ctl with 20.8gpm and 2600psi, maybe one motor for both? Here is the reason for my question.

I am working on a hook up of a hydraulic motor to an excavator. Aux pressure is 3000 psi the flow is 20 gpm. The motor is rated at 2000 psi continuous/2400 psi intermittently and 10 gpm. I have the flow control valve rated for this, my question is about the pressure relief valve. The valve is a...

You could try it this way. The drawing is from a salesman from Traush hydraulic. He suggested this for a project I am doing.

Here try these. Just kidding. I think the tire sealant I linked you to will work. Even if you use two or three times what they recommend. If you want me to, I will get you the name of where I bought mine, it wasn't from the link.

I have been looking at different solenoid valves for a 3rd function front remote. this valve will be mounted, unprotected to weather when in use, stored under roof otherwise. The valve has 3 types of connections, conduit box, din connector, and deutsch connector. What are the differences? Anyone...

This a drawing from the instructions in a two spool remote valve kit (loader valve) I had installed. My question, is the blue line the correct place to access the PB. This line in real life is 2 hard lines with a rubber line between them. If this is an appropriate place, I can remove the hose...

Willy,I think you could use a small stone (buckshot) in one of these. They are for rock salt and melting chemicals, I have only used a product called "snowplow" in this one. That product works great in it and on ice. You could try dry sand, but you would need to close off the opening some.

countrybumpkin, it's been my experience that more teeth are better, new teeth are best. here is a photo of an 84" ctl bucket I had 13 teeth added to along with an additional cutting edge for strength. The cutting edge in the photo (yellow) with 4 teeth welded to it is a bolt on smooth edge so I...

NO SNOW HERE, maybe I need to put the mower back on.

He didn't even close the rear window! Good thing that wasn't a dairy operation, he would have to close the window and use the wipers.

After changing the engine oil and filter on my New Holland CTL, cleaning up my mess I found this part on the floor. I haven't had the loader back in my shop with the boom up and side covers off to give it a good looksee. I have used it several hours since the oil change and nothing is leaking.It...

VOL54, see if this blade mount looks like yours, if so try this. Get the mower up on something (trailer). You can remove the hole cover if you want but I think all it's good for is pictures. Clean off around the bolt head, swing blade out of the way, on it's pivot not the mount. Put a long 3/4"...

they do exist

THANKS ETA very interesting! lt190b

Is the Case L350 farm loader and the New Holland 250TL farm loader the same loader, just different colors and stickers?

Is the Case L350 farm loader and the Newholland

Loader attachment for 2009 Farmall 40,Thanks.

In one of the thread subscriptions I have, the email notice doesn't have link back to the thread. Is there a problem on my end? lt190b

Speaking of forcasts wonder if this correct?

Here's the proof I just looked up my file, bought it 8/17/2010. Hope there is some left. lt190b

?????I don't know if this an add on or factory. I didn't post a question on ott, the first and last time I did I got scolded for not being a dues paying member! lt190b

Anyone else having back button problems? How do I get rid of the doubleclick problem? Only happening on TBN!! lt190b

Just visited Titan Attachments web site and the CHAT GUY is still in the way!!!! WHY???? lt190b

What is the difference betweem these loader attachments/

I'm having trouble loading images, maybe this time lt190b

Who makes the subframe that fits kubota,MF,CNH, and probably others? The blades all look alike, the blowers and brooms look very similar. lt190b

Anyone else having FREEZEUP problems on tbn? lt190b