Search results

Tractor 2016 XG3025 362 trouble free hours . I saw a little axle oil on the inside of my left front rim , for most of the winter it's been setting . i looked under the front end for a vent tube didn't see none , went and check manual there's none only vent the axle has is the blue threaded cap...

I won a bid on this brush hog a FMC 5X5 Side winder $190.00 -- $209.00 total after fee's not a bad mower , tried it out today ran and cut preety good , i noticed not alot of PTO noise or viberation through out the PTO shaft . any comment on this mower good or bad ??

you ever see that one thing and say , dont really need it , well maybe someday i might .. so i watched a video on you tube , Tractor Mike and on his NH he had that carrier on his rops , looked handy ,, so I'm a Fab guy thats what i do so i made one up for the 3025 . it will come in handy I'm...

Hello, thought i would ask if anyone is /has run a tree shear on their LS . I'm building one to clear out alot of 1 to 4 " trees that has poped up over the years . have about half of it put together . this is a copy of the mini clip saw a video of one and thought i would put one together ...

At my job after a bobcat cutting edge is used about half way down they are replaced, so i took a couple of the old ones home , they replace the edge and the bolts every time , i use them on projects that need a cutting edge . the 68" bobcat edge fits the LS 68" bucket on my 3025 the same as a...

2016 LS XG 3025 install of third function and adding 2 rear remotes 1 remote is live 1 remote goes though a Directional Control Valve on the third function the model is Summit Third Function Valve Kit w/ Joystick Handle 13 GPM model SKU: Z50-1A-J2-AG12...

anyone using one of them on a LS ?? doing a install on a XG3025 as well a remote on the rear thinking i will add a backhoe someday . Jake

here is a few mods i did on my XG3025 , i run a quick hitch and i modified it so you dont have to shim any of your 7/8 pins on your attachments to work , i rolled a 1/4 X 1 strap around a 1 inch bar then welded it into the QH so my 7/8 pins are snug with very little play . I bought the QH from...

Hello,: I did a search and didn't find any good replies , I have a LS 3025 with ballast in the tires from dealer the pressure was 20 lbs in the front and 15 lbs in the rear , the front tires show 50lbs max and the rear shows 30 lbs max is there a ball park to run the tire pressure with...

Hello, I purchased a 2016 XG3025 that was a trade in to a Massey dealer for a 70hp tractor , the 3025 had 69.hrs on it and only a few very minor scratches , looks pretty much new have put 5 hrs on it been a nice unit , at this time I have NO oil leaks of any kind to mention I starting...