Search results

has anyone used that majic paint? if so how did you apply it? i want to spray it on my stuff and ididn't see any thing about using thinner on the can, idon't think the reducer will thin it enuff.

i have a 600 ford , my worm gear broke , so i tryed to replaced it ( keep im mind i said tryed lol) i put new bearings/ races, and seals, first thing i noticed is that my new seals didn't hold because i stepped in a big puddle of gear oil yuck , then i thought i'll just put the thing on my...

i have been shoping around for a new tractor, this last week , boy have i met with stuff that worries me , the first dealer is 30 miles from me , witch just the distance makes me want to buy from him, but the guy lied to me , so i go to another place , now i feel like i'm begging them to sell...

im wanting to build me a post frame building, i have seen kits for sale on the internet at prices i like, what i want to know , has any one bought a post frame building kit for the net?

today i had a guy from a oil company contact me, the oil company wants to lease my land, i was wondering if any one has or knows if this could end up bad for me. thanks for any and all advice.

in 2011 i had a guy cut my trees , the guy offered to do this job on a % baisis it was around 40%, my niebor also had this guy do his timber and he found some of the checks that came from the timber id the buyer, he showed me the checks and i did the math he only payed me 8.6% for mt wood. i...

i am rebuilding my 600 tractor steering gear box, i bought new worm gear, bearings and cups, today i started to put this togther , and the steering shaft don't want to fit right,( when i tighten it up the steering locks up) im not sure why , i have put the box completly togther, but i have to...

i would like to put a 3ph bh on my 600 ford, i am wondering if any one has ever used or owned one , the thing i can't understand is how does the hoe use the weight of the tractor , because my 3ph will not hold and thing down, (what i am saying is that when my 3ph is down i can just lift up the...

i took my steering gear box on my 600 ford (it is a manual box) i have finaly got to the point of putting it back togther , but i have a big problem, i don't know how to put my sector gears back ,is there a way to put them in ?

have been thinking about a new tractor and i got too thinkng (witch is never a good thing lol) is there a way to insure a tractor?

a wile back i posted about breaking my drive shaft for my mower, and i just found out i didn't onlt break my shaft i broke the gear box, i have seen some replacement boxes online but i don't know how to size mine, is there any trick to picking the right box?:confused:

i am wondering is it possible to convert my 600 to live pto , (i don't feel safe the way it is) if there is a way to do this , has any one done it ?

i borrowed my neibors tractor yesterday so i could bush hogg my field , i the drive shaft broke , so i am wanting to fix it, it is the square typ are there any shafts available?

not sure if this is the right place for this , but i am working on a foton 404 tractor , i took the drain plug out of the transfer case , 5 gallons of oil ran out, i don't know where to put it back in and how to check to make sure it is full.:confused2:

today i got the tractor split there must have been 5 gallons of water in the bellhousing i know why the clutch wouldn't release , it is a mess in there , even the pto clutch was stuck, now i just need to put it back togther, and find a way to stop the water from getting in.:)

coupple days ago, seen a 1970 something ford 3000 it had 1700 hrs on it the guy is asking 3500 for it and it happens to be the tractor i want, im just trying to find out how fare i can try and get him down.:D

i just got my new clutch yesterday , it is a dual clutch i have one friction disk (thinking it is for the pto) and the other friction is in the pressure plate , my question is,is the frition disk in the prssure plate sapos to move ?

i am looking at a tractor king tractor it is a 4x4 diesel , the clutch will not release, and i can,t find any info on this tractor as to where i can get parts and so on, has any one ever worked on one of these ?

yesterday i started to modify my 600 steering from manual to power, during the removal of stuff i found some real problems:eek: , the steering gear is shot, so now im back to square one. any one ever rebuild a manual box? being that i have to fix or replace my box i was thinking that maybe i can...

i just got a old hough fel, the cylinders leak real bad, does any one know where i can find parts for thes cylinders?

wife wants to expand her garden , i was thinking that a plastic mulch installer will be nice being that she is shooting for 1+acer, i have seen some in action, looks like one will be nice,so i have been doing some internet shurching, have found plenty of places to buy consumables, but not one...

i am including the photos of the thing i tryed to get a pic of all angles, i took one with the numbers on the thing. i didn't see any name on this

i have been cleaning out my building, i run accross a dash pannel off a yale fork truck, the steering wheel is attached to some sort of pump/motor/ valve, i don't know how this was plumed , and i can't find any info on this thing, i am assuming that this was the steering valve, because the...

i have a 600 ford , it doesn't have power steering, i am to cheep, and affraid to buy a power steering conversion kit, so i am thinking that a hydraulic steering set up might be my fix,i have also given a car rack& pinion set up some thought, has any one seenor done some thing like this?

i am looking for a crank pully that i can run two bets . i have a 600 ford i am trying to put a powersteering pump on i am looking for a two belt crank pully, could some one point me in the right direction?

i just got a older loader for my 600, the loader has a trip bucket ,so i want to put a two way cylinder on the bucket, i want to connect the old valve with my new valve, any info on what i need to do?:confused:

last summer i bought a new rear tine tiller, i used the tiller one time last fall, the other day i got the tiller out and it will not move forward, this tiller is a power mate i bought it from home depot, :thumbdown:

my father in law has just started raising bees , now he is making plans for honey ( yummy), he said he raised bees for honey when he lived in fl. and he lived close to a orange grove, he said the the honey was real good , has any one raised bees? if so did you plant something for the bees to...

just got home from picking up a fel ,post hole drill, still asking my wife to pinch me, at the price i gave for the two i feel like i am dreaming.:D

i have a 600 ford ,i have put new rear seals in the motor, this last time i put new side seals i ran a bead of silicon in the inside and out side of the block, this seems to have slowed the leak but it has not stoped it has any one had this problem? if so how did you fix the leak?

i just bought a fel and i have been thinking about attaching a bush hogg to the front of the loader, i think that will give me the ability to keep my ditch banks down,(and hopfully the string trimmer lol) i am thinking of building a 3 point set up but im going to have my top link hydraulic so...

i recently bought a 600 ford, when i got it the lift wouldn't lift, so i found a rebuilt one, now im thinking it my not be properly set-up, first problem is the lift dosen't lift very high, and it has a hicup when it is all the way up,i was wondering if the 3 point arms ( the ones that are on...

i found a 8n with a fel the guy is wanting to get rid of the fel this may need some work who would i get parts from , o yea the fel is a older model it has a trip bucket.

i have been thinking about putting a hydraulic cyl on the top link andboth of the side links so i will need to control 3 cyl i'm hoping to be able to adjust my top link angle so i can get me blade to cut hard if i want and i also want to be able to adjust the angel so i can us the blade more on...

well i went out and took a pic of the plate i'll try and post the pic

i have just aquired a 600 ford tractor , this is my first tractor by the way the first thing i had to do was to replace the lift top, mostly my falt, now the clutch relese lever has broke, i can't get it off to replace it , it looks to have a pin running thru it and from what i see on the...

i have a 600 ford this tractor has a few oil leaks and i am trying to get them sealed, my first question is where would i start my tractor is a 4 spd it has a thin small square plate of metal on the bottom of my transmission , i took the plate and found a plastic bag with duct tape i have no...

i hope im putting this in the right place . i am trynig to rebuild the top hyd lift on my tractor im trying to remove the shaft that goes all the way through it and i can't get it to move does this need to be pressed out and back in it feels like there may be a bushing woreout so i want to...

i took my top cover off yesterday and found that the oil is milky. i thouht no problem i'm rebuilding the lift any way (new oil on the way) , but then i decided to look at the rest of the tractors oil and i found that the transmission oil was milky also. so my question is are or does the...

i just traded for a 600 ford it needs some work ( not a suprise) this tractors pto will run sitting in nutrual but when i push the clutch in the pto quits is this right i thought that my pto will run all the time ,also the guy i got it from told methe reason the lift doesn't work is that...

hi everyone bought my first tractor today now i'm looking forward to learind how to use and opperate it :cool2: