Search results

Is this a Covington planter? I was cleaning out the barn at our old homeplace and brought this home. It's in much worse condition than I first thought. I have the Pittsburgh cultivator it attaches to. It seems some parts are missing to attach it to the cultivator. Also the seed plates are...

UPDATE: New fuel lines arrived this week. First I replaced the easy one: from the filter to the transfer pump. This didn't fix the problem. Then I replaced the fuel line from the tank to the filter. This required me to remove the cowl and lift the tank to access the fuel line. A simple 5...

I will replace the 2 fuel lines before the transfer pump and see if that works. I'll try to remember to post a follow up for future reference. Steve

I thought of this once when I was mowing. I took the fuel cap off; there was no change. This makes me think it may be the transfer pump. Steve

I've never heard a clicking on this one. The transfer pump is driven off the camshaft.

My B7300 recently started 'starving' for fuel. Air is being introduced to the fuel system somewhere. When the engine begins sputtering I can watch the clear housing the fuel filter is in. I see that the fuel level goes to the bottom of the clear housing then the tractor acts like it's out of...

I own a 1974 830 since 1998. It's a great little tractor that punches above its weight. Mine has a loader. I've had no problems getting parts from my local dealer and online.

Right, side plate. I actually didn't remove it to access the starter. The lower bolt on the starter can be reached w/o removing the side plate. It is tight though.

I have the 830 which is the same tractor, previous generation. I also have the same loader and had to remove the starter. I removed the loader, then the right side mount and 'plate'. Not sure what it's called. Using another tractor with a loader and chain hoist made it easier to remove the...

Thanks in advance to any who can help. I have hydraulic fluid leaking around the PTO shaft. This is a 1974 830. Do you think part 14-seal or 19-gasket, or both, will stop the leak? Hopefully the Deere parts diagram and my picture will both show up.