Search results

Results 1 to 7 of 7
  1. N

    JD2010 dies when temp hits "normal"

    So I'm convinced my gas tank has an obstruction, was suggested that I run a wire up the gas line, which I haven't done yet. I can't find literature or chat whether there's a filter or mesh cover in the tank. Is the wire trick recommended?
  2. N

    JD2010 dies when temp hits "normal"

    Some excellent advice, I'm taking a couple days away from t he farm however and won't probably have the time for a week to try isolating, etc. I'm thinking I wasn't patient enough testing lines before.
  3. N

    JD2010 dies when temp hits "normal"

    I replaced the gas cap early on, and did try running without the cap, no change. I got as far as making sure I have a good spark when it dies and won't start, so I'm going back to the fuel lines. Since nothing I've done works, I'm starting over....let the fuel run from the tank, and am...
  4. N

    JD2010 dies when temp hits "normal"

    I changed the coil early on with the recommended 12volt for a 2010, it didn't make a difference. I don't see a resister in-line with coil wiring.
  5. N

    JD2010 dies when temp hits "normal"

    I had the ignition switch replaced about 10 years ago, logic (and limited knowledge) leads me to believe the points and plugs are fine because it always starts right up even after sitting for a few weeks. Could something with the condenser, rotor or distributor cap just shut it down when the...
  6. N

    JD2010 dies when temp hits "normal"

    did that, also. checked the gas at the carb once it died. I also switched gas when the carb was installed by the dealer.
  7. N

    JD2010 dies when temp hits "normal"

    My 1964 JD 2010 starts right up but doesn't like to run. Whether idling or moving, it will just quit after around 20 minutes of running, or about the time the temperature gauge hits "normal", and will restart after sitting for maybe up to 10 minutes. I've had a rebuilt carburetor put on, checked...
Top