Search results

You can ask a local scaffold company to supply engineers drawing to safely rig up scaffold over the roof. They know their products and have experience with this kind of situations. Maybe they can provide the drawing at no cost for you with the rental of the equipment. Rosette scaffold or...

I think the 4420 sell new for 10K $cad. Don't know for the 4000, but itis bigger than mine. The dump frequency is in direct relation with the quantity of stuff on the ground. But at least, I don't pickup all of this by hand. You learn how to improve your circuit to optimize your time and...

Best solution to get rid of oak leaf on a big place is a Agrimetal tuffvac 4000 or is little brother 4420. I own a 4420 and it a great machine with a live floor to unload. Unfortunatly, the 4420 is no longer in production. The tuff vac can be run on pto or stand alone with a 27 hp kolher...

HST tractor haves clutch like other tractor

When you put washers on both sides of a plate, use different size on each side to prevent the shearing action around the washer.

Try putting a piece of steel pipe outside to keep thing round and insert a big ratchet socket inside the fitting. Then use a pair of long nose vise grip to work the socket in the fitting until it get back to shape. Sorry no picture of what I mean.

My goal with the ratchet rake is to remove the layer of weed without removing a lot of dirt like I will do if I remove 2 inches of dirt everywhere. If it loossen the dirt on thee surface, it will be a bonus. After, I will level the yard with the bucket and the blade. BTW A excavator operator...

You can get some good deals on used one on place like agdeel or maketbook. This kind of equipments are used by golf courses and municipality.

We want to finish the yard behind the house. We do a lot of work and nothing is flat anymore. Weed have grown everywhere. Did a ratchet rake will help to flaten the yard and deal with the weeds clumps. Dont want to buy something just to discover it not the right tool. I have a backblade...

Maybe an Agrimetal tuffvac 4000 would do the job. https://agrimetal.com/en/project/tuff-vac-4000/ I got a agrimetal 4420 and the machine do a great job to remove leafs and thach.

I will make the groove deeper and wider to help keeping the cable in the sheave. And maybe add a piece of steel to be sure the cable cant go between the sheave and the housing like Gordon Gould does

You mean the cable could get out of the second sheave when doing side pulling? Norse winches are built this way. Maybe I miss a detail about their sheaves configuration. I'm pretty confident the cable will stay put. I add a swivel cable guide to help the loose cable follow the right path.

Never think about this one. I will check how I can mount it flush and keep some strenght .

Unfortunatly, no way to freespool without modification of the winch. I plan to use a wireless remote to control the hydraulic valve on the winch. I will add mounting tab on the 3 pt

First layer speed should be 82 fpm. I cant justify to spend as much money a pto winch worth. The hydraulic winch with the motor was real cheap and I have some material on hand. I will use this winch for maybe 2-3 times by year to recover trees in bad spots or to control falling route.

Hi What do you think about this winch design? (Upper link is missing on this drawing) Hydraulic winch Tulsa 8000 lbs 3/8 wire 150 feets Will be use at home on our land to recover broken or deads trees with my Case DX26 I allready have the winch and 12 volt hydraulic valve and some...

Trigg chains They transform my tractor in a real snow pushing machine, even on ice. Ride is smooth.

Thanks Rustabout for the supplemental info. It was clear in my head, and stay there.:rolleyes: That exaclty my point.

Try to slowly loosen the fill plug to see if you have any pressure in the case. They dont have breather plug on the diff case.

Maybe you can fix the treads with an Helicoil kit. Possible repair with a hand held drill.

Maybe you can fit a hydraulic clutch slave cylinder from a car on your tractor.

OP state set screw came loose... maybe bent shaft is the result of the loose screws. So longer set screws and counternuts can solve loose screws problems.

Hi I own a Case DX26 since 5 years. We use it to mow the yard and for our snow removal with a 64'' rear snowblower. This week we get a lot of snow, while I'm blowing snow, I go forward to make another pass and I hit a concrete post with the bucket corner. I check fluids and fuel the tractor...

When moving between two mowing spot, I hit the MMM on a concrete block. After the tractor dont want to move forward in HI range. Now I can move back and forth in LOW range. But in HI range I can kill the engine. Do you have any ideas? Where to start? Thank