Search results

Do you have a mid PTO?

Check tank vent. Usually integral with cap.

For small jobs and smaller rock, use sweeper attachment for string trimmer, either brush or paddle type.

The Kubens at work. Next project: linear actuator for chute adjustment!

Have used it several times now. It worked well but because of how I had to mount it, I have to shut blower off when I raise it due to the angle that imposes on the drive shaft. Not a big deal but one thing that I have to remember. Originally as I mounted it, the blower raised too high and the...

Replacements are almost impossible to find at anything close to a reasonable price. I've been looking. Have always greased with the zerk on the pto drive but this year I removed that to take a look inside. All was good. Shot some grease down the tube, reinstalled and greased with the zerk...

This appears to be a HST, mine is a standard tranny. The mount for my conversion and the original snowcaster pushed off of the main tractor frame.

I hope so too. Have extras on hand in case.

Thanks, it was a design and build as you go with what you have on hand (mostly).

Is the 950 a direct replacement? I know the 850 is. Does your loader run off of front pump or tractor pump? I put LED lights on mine, 4" off of Amazon. Not the best though as it isn't focused. Throws light everywhere! an alternator will probably have to be mounted on top of the engine as I don't...

The project is done! Purchased a very good Ariens 2 stage blower (old Kubota one was a single stage) and had to make a reverser (of course) as the new one runs opposite of what the tractor runs. Here are some pictures in no particular order. Also, here is a link to see it run. New video by...

I have a 1979 B7100 with 700 hours on it, purchased used. Like was said above, almost indestructible. Parts are mostly available, Messicks and ebay are good resources. Kubota dealers generally don't like or want to help much looking for parts for some reason. You will have problems running a...

Is this on a B7100

Has anyone done this to eliminate the dynamo? And if you have, do you have pictures of what you did? Thanks

Thanks everyone. Sincerely appreciate the responses.

Current project is to mount an Ariens 2-stage snowblower to the front of my Kubota B-7100. The Kubota front PTO spins CW and the Ariens needs CCW, so I will be building a v-belt reverser and speeding the drive up slightly (27-2800 rpm to about 3200 rpm). On the attached drawing (not to scale)...

Just wondering if anyone has modified and attached a snow blower to the front of a B7100 other than a Kubota product? Looking at an Ariens 831010 or similar. Had a Toro I was going to try but that ended up too complicated and too heavy. For this Ariens I would have to speed up the front PTO (by...

Hi all of you Gravely fans. I do not have one but am looking to possibly purchase a Gravely 48" snowblower. I need something different on the front of my Kubota B7100. My existing blower doesn't have many snows left in it anymore. I'm not sure which tractor this came off of. I think I can...

Has anyone with a B7100 retrofitted an alternator to this tractor? How about a water pump on the old girl? Thanks

I am thinking of replacing the flighting on my B748 snowblower. Has anyone done this? What do I need to watch out for? I am also thinking of making the bearing attachment non-movable and using an idler to adjust tension. Any thoughts on this? Thanks much

My cousin has a mid 1978 JD 850, 2wd tractor, 330 hours, a 6' JD front, manual angle blade, and a Land Pride 5', 3 point brush hog that she would like to dispose of and wants my help. All items are in very good condition. I've done some checking around and it would appear the package is worth...

I have a Kubota K348-7 rear finish mower that is missing the blades and the bolts that hold them on. I can get the blades with no problem. The problem is, Kubota doesn't have the bolts any longer. The only thing the parts list shows is a part number and the decscription as; bolt-LH thread...

Has anyone used the Grote 4" white l.e.d. array for headlights on a c.u.t.? Do they work out O.K.?

It doesn't appear, after googling) that anyone handles an after market cab for these tractors anymore. Who has installed/modified some other type of cab to fit and from what unit? Thanks

There are a lot of posts here about converting manual crank chute turning to electric. The question is: Has anyone who has done this modification had problems or wished they would have done something different or re-modified the modification? This mainly pertains to those who have used wiper...

OK Kubota wizards-what is the difference between an "A" engine and a "B" engine? My B7100 has the "A" designation but I have seen references to a "B" engine. Thanks

I need a good used manual or a copy. Let me know what you have and the price. Thanks

What do I need to add hydraulics(remote) to this tractor for a front snowblower? The hydraulic pressure line has a block in it with four bolts on it. I assume this is where you tap in but do I need to buy an adapter block that is tapped for lines or what?

Looking for part number for the blades for this unit. It dates from the latter 1970's. Thanks

Kubota 42\" tiller I recently acquired a B420, 42", pto driven Kubota tiller, with a tractor purchase. The tag on the tiller says Model B420 but I can't find any reference to this model anywhere. Does anyone know if Kubota had a dual numbering system and perhaps this is really called something...

Need info on front pto unit for this tractor. I have parts manual and technical manual but they don't show this unit. Part #'s and a pictorial scan would be very helpful. Thanks.