Search results

Had a spoon style 72" purchased on line and don't recall the brand. It was poorly built and the spoons plugged up so let large holes and no plugs. Have an old Gil 48" spike rolled that pull with mower with 160 lbs of weight added and it does a nice job.

I had Bobcat brand orange non-marking tracks installed on the MT100 purchased this spring. They work great in the snow, mud, slop and are not bad on turf if careful. Wanted to get away from black so I did not markup the bran floor and outdoor concrete. Very happy with the results.

Was interesting the RPM's are the same before the speed limiter setting, just seemed faster with the speedometer reading 24.3 vs 18.9! Compared the the open station M7060 it is a lot larger when you are in the cab. The tractor is tall with the tire set I wanted and the wheelbase is slightly...

Mowed the back 10 Ac field today and it was a easy cruise. Set it on E-PTO and 6th gear low and had no issues. The tractor rides so much smoother than the L6060 or my M7060! Love how quite the cab is and great visibility.

Was looking at the mini loader market my self two years ago and decide on a stand on mini track loader. Started with Dingo 1000 but it was a covid built machine and it showed. Currently running a BobCat MT 1000 wide track and love it. Have a grapple, forks, bucket, Harley Rake, landplane, and...

Called my salesman he said service should have set it up. Only took a few minutes but it was a slow ride home. Rear tires had 25 psi dropped to 21 psi, more squat so should soften the ride. Going to mow this week and see how it does pulling the batwing.

Picked up the tractor Wednesday and drove it 12 miles home. It maxed out at 18.9mph vs 23.9 as shown in specs. Turns out when it is ordered with the tallest tire size you have to go into the display and enter the size of the tire in inches. Disappointed the factory or the dealer did not take...

I have purchased two tractors, mini ex, and skid steer from Ginops near Traverse City. Saved thousand on each typically 10K even with shipping to my door.

Decide to go with a new M5-091 for mowing my horse pastures. snow blowing, hay making. Keeping my L6060 for loader work, roto tilling ect. Looked over red, green, and blue tractors but liked the orange the best and getting a good deal. Added air ride seat, 3 remotes, Goodyear radials, buddy...

Picked up the new Landpride FM2584 Fail mower last night. Hooked it up to my L6060 and took it out for a test mow. Set the rear roller for 6" cut and the front horse padock that is mixed grass and clover about 12" high. I used different speeds from 2.5 - 5 mph with rpm at 540 and it cut great...

Decide to buy the Splitfire 4209 splitter for the Mini Ex, saved money over the towable model. Should have in 3 weeks. Need to find some of the metal IBC containers for firewood storage, so far only finding the container with the poly liquid containers for $150 each.

Looking for options for a wood splitter myself for the mini ex Bobcat E40 or go with a towable with log lift. My normal logs for splitting are 25' and less so I feel the log lift equipped splitter would be much faster to get small firewood for wood stove. The thumb splitter is good option for...

Just order a LandPride FM2584 with duckfoot blades for use behind my L6060 for mowing my horse pasture. Use a BushHog 1812 batwing and it works good by leaves clamps and does not shred the clippings well. Normally mow to 6 " but every spring in Ohio it gets away and end up cutting it down a...

Altzo sells a slope meter that mounts tot he platform in front off your feet so you can view it during operations. Has green, yellow, and red zones. Yellow max's out at 30 degrees and that feels pretty steep as an angle to cut on. I did add on to my machine and normally my hills are green and...

I own one Altoz 766i with the more aggressive tracks for mowing our horse farm with creeks, ponds and many hills. Purchase it with the all terrain bush hog deck and removed the swing blades for fixed mulching blades. It is a beast and will hold slopes great! It track system is very smooth and...

I like a landscape rake with gage wheels, own a 72" landpride for use behind my Kubota L6060. Use it in place of the blade unless the surface is to hard to dig my heel into. Have 800 ft driveway and it does a great job dressing it out and restoring the crown down the center.

Check out a Yamaha U-Max 2. I sold my 2015 Yamaha Adventure two golf cart with dump bed and got the new Umax. It is a golf cart so just jump on and hit the gas pedal to drive, goes 19 mph and can carry 900 lbs in the dump bed. Has tall knobby tires in 2 wheel drive and does pretty good in...

Fallon do you mow with a loader with the bucket attached on the tractor? Will set the fail up with knives.

Have a Kubota L6060 cab tractor and pull a 12 bat wing bush hog that use to mow 15 AC of horse pasture. Have another 15 AC of fields that is poor soil and sloped that use a 66" zero turn to mow 3 times per season. Works ok but rough ride and get covered in dust and cuttings. Plan is to get a...

Got some hours on the MT100 and really happy with the machine! It has so much more power to the tracks and boom than the Toro. It has slightly less lift capacity but out preforms the Dingo in all areas.

Better call your dealer.

The 1752 is really amazing, I called two dealer in the Northern Oh are and could not even get a call back from a sales person. Just worried me the service would suck and seeing the price on 1750's was to much. Would like to have one but also need the smaller 752 for tight work. You have the...

MT 100 struggles and tips when picking the cube, the Toro TX 1000 struggled and tipped but could get it off of the ground. Second test yesterday we had pine shavings dropped off. The truck has a mid size John Deere skid steer to unload. The pallets are 50 bags each stand 7 ft tall. The Toro...

Have 20 hours on it and really like the MT100. Same HP as Toro TX 1000 but the hydraulic system is more powerful allowing much faster loader cycle time and the drive motors have no issue spinning the machine around with the bucket full on concrete. The Bobcat has more steel boggy wheels on the...

May need a different head gasket, adding boost is a easy way to blow!

Weld it or try to careful hammer the metal to tighten up the spacing?

MT100 $36,370 50" BUCKET $1,070 42" FORKS $1,100 36 MONTH 2000 HOUR WARRANTY $1,200

Yes it is very worth it, have a L6060 cab with air seat and L6060 open station standard seat. Thinking of buying and air seat for open station.

I have had a Toro Dingo TX 1000 for 4 years and have grown tired of fixing the constant Hydraulics leaks from fittings, hoses and the tank drian. Recently purchased a Bobcat E40 excavator and it has been great. Tested out Kubota, Wacker Neuson, and Bobcat stand on skid mini track loaders. Liked...

If thinking Kubota If you want Hydrostatic get the L6060 over MX series, add 3 rear remote with Hyd top link and a third function valve on the loader for a grapple. R4 tire with 180 lb of weight in each tire, no fluid filling the rears it will ride terrible if you fill them. If gears go with...

Have two L6060s a 2021 open platform and a 2023 cab. They have been great and no issues. Deere makes good tractors but the Kubota's are better in my experience for utility size machines.

I have a L6060 and Woods 12 ft bat wing and mow my 15 ac horse pasture with no issues. Have 4 ac of river bottom ground that mow twice per year and get into some brush with no issue. When in the pasture mow at 4 mph, in the heavy river bottom ground 3 mph. As noted the L6060 has just enough room...

Have a Woods BW12 for the last 3 years. Pull it with a Kubota L6060 and so far no issues or problems. As someone noted the wing hinges are tite and no grease points. I store my mower in a shed so it does not see rain and have no issues with the wings not coming down. Looked at Bush Hog...

I just purchased a BobCat E40-R2 with 12",24",36" buckets and fail mower being dropped off this Friday. Looked at Cat, Deere, Kubota, and Yanmar 25 - 40 hp units. Rented a Yanmar and Bobcat machine for weekend and really liked the Bobcat much better. Yanmar worked well but was loud and lot of...

Have a year owning a Dingo TX 1000 wide track (42") Also have a Kubota L6060 with loader. Love the Dingo for all kind of tasks. Have the following attachments 48" Harely rake std and light material buckets Auger with 36" and 12" bits Forks and I can move 1200 pallets of horse bedding Dingo...

ABI makes nice horse arena grading equipment. Just smoothing out the surface does not prepare the arena well. Need to breakup the arenas surface down a few inches and fill in horse hoof divits. We pull an ABI ARENA RASCAL PRO

Cabs are harder to climb on and off for sure, still deciding on the cab option. My local dealer has a 2022 ROPS KXO 33 with thumb, angle blade rental unit for sale at 46K. HAs 122 hours priced out new it is 62K. Seems like a good deal.

Any updates on ownership on your Kubota KOX 33? In the market for a mini and down to KOX 33 and Yanmar VIO 35. Leaning to ROPS due to lots of woods work but sure loves cabs for the weather, bees, and hornet protection.

In the same boat has others and shopping for a Mini Ex, have an L6060 cab with FEL, and a Dingo TX1000. Rented a VIO 25 ROP with 2 way blade an the machine was powerful but did not have a thumb and just seems limited on reach. Decide to shop for Yanmar VIO-35 R6 or a Kubota KX033 with thumb...

Planning trading my 2007 M7040 for a new M7060 HD12 with cab. Still unsure on tires. Use the tractor for loader work on hard surface, mowing 15 acres of horse pasture. Also grade riding arena, haul fire wood, push snow on 400 ft paved driveway. Have R1's on the old machine and want to get a...

Have 15 acres of land with fence around 11 for horse pasture. 15 years ago purchased a Kubota ZD21 with 60 deck and installed bar lug tires. Good mower and no issues just blades and fluid changes at 1200 hours decided to upgrade last year to a Kubota ZD 326 with 60" pro deck. Great mower...

My front tires are the stock 9.5 24 R1's and want to install wider tires for less compaction and wider front stance. Willing to swap rims so if you have made this conversion or source please devise. I use it for my small hay operation.