Search results

I have a 1531 cub that I just use for grass cutting! I no longer am able to lift the deck high enough to stop the wheels from hitting the ground when driving and not cutting. I have the adjustments at the highest adjustment but the wheels still hit the ground frequently. Any ideas about...

Thanks for the manuAl. I just have to wait for warmer weather to see if this is something I should tackle

Compression test is 60 lbs per each cylinder not sure what it is supposed to be When it warms up I am thinking I will' pull the heads

Thanks I will check the compression that helps give me some direction Lots of pressue at the breather tube and oil fill pipe when i crank the engine over the engine doesn't use a lot of oil so will check compression

Should there be a lot if pressure there or not.Is there a crank case vent i am missing

It may have run a bit low for a very short period low on oil but I caught it pretty quick.i took the breather cover off and blew thru the hose and it seems clear unless I am missing something. It started and runs good just a lot of oil getting flung around via the crankshaft

My. 1541 Cub Cadet is on its second engine is a Kohler m18 First engine seized up at 600 hours This one started with a rear seal leak so I replaced the seal but seems to be blowing oil when running Almost like serious pressure Oil filter is new breather is not plugged just a lot of oil blowing...

hi all anyone know where I download a manual for a Kama km 554 I just bought one with only 100 hours on it but would like info on it

I just finished rebuilding the carb on an old M52 Onan in a Sears 917 something---Apparently a Canadian Model Now my starter motor isn't engaging so I pulled the covers off to see the gear all chewed up. I ordered a new one ($125.00 Canadian) and am looking to find out if anyone has replaced...

I am new to this forum and wanted to say hi . I own a 1532 a 2182 cub cadet and a very old Sears tractor from the 70s Just was out blowing snow a week ago and had a big metal on metal noise come out of the front of the 2182. I checked and the belt had shattered taking all of the wiring with it...