Search results

FYI. Florida Statute 316.1975 prohibits leaving a motor vehicle unattended with the engine running or the ignition unlocked, requiring the engine to be stopped, the ignition locked, and the key removed to prevent theft or other hazards.The only exception is for licensed delivery vehicles...

Hard to tell from the pics. Maybe these folks can help. https://shop.perkins.com/?srsltid=AfmBOooAVg17nXHusX5YwAVH0gVeV1435Q9i64-ojB2LCZvw8zQOdyqO

I assume you have searching AGCO for the Massey Ferguson 253. Try searching for parts for the Perkins engine. Likely that engine is used in other machines. Tractor Data indicates it is a Perkins AT3.152.4.

You need to properly diagnose the problem. Don’t just jump into parts replacement mode. Get an experienced a/c technician involved. Doesn’t need to be tractor specific. All mobile a/c systems operate pretty much the same. The parts may be unique to the manufacturer but the diagnosis is...

You can order MF parts from the AGCO website, but the parts search for older machines is somewhat squirrelly. You have to select a dealer to get the price and I have always selected my nearest dealer (about 30 miles away), so I don’t know about ordering from other dealers. I was able to...

I’m not sure based on your desciption, but is this what you are looking for?

Not familiar with your trailer but the trailer’s wheel seals and brake controller connections are pretty generic. Any ideas about how to repair this would be appreciated. Replace the grease seals on the trailer’s hub. It would be beneficial to repack the wheel hub bearings (both inner and...

Having a background in nuclear energy, I understand that. However most of the public do not have a clue.

I don’t see fusion being accepted any better that nuclear fission.

Not a plan. Wishfull thinking at the best!

One has to wonder what those countries and states think will power the machines that will be replacing the ICEs. I expect they are counting on EVs. Also likely they have no clue where the electricity to power the EVs will come from.

I’ve had good success with Milton brand. Use teflon tape in the threaded connection.

Specifically reference where? Don’t see it on the quick reference sheet.

This link will take you take the WSM for your machine. https://www.kubotabooks.com/AutoIndex/index.php?dir=Tractor%20Owners%20Manuals/&file=BX23S%20WSM.pdf

Likely the glow plug relay or the relays connections.

I have no idea if this works or not. https://www.ebay.com/itm/145753336637

Anyone able to ID (make, model) this offset rotary cutter?

I replaced the T8 eight foot fluorescents in my shop and garage in Aug of 2021 with LEDs nor using ballasts. Eight foot fluorescent tube were hard to find and replacement ballast were non existent. Thus far, they are still functioning well and are super bright (really nice for the shop). I...

I don’t have access to you model of machine. However, it’s not hard to convert inches to mm. Multiply the length value in inches by 25.4.

What is difficulty with measuring the nuts on the LX2610SU? No ruler or tape measure?

Pretty easy to recognize a tire on your motor vehicle going flat. Not so easy on trailer your are towing. A flat tire on a towed RV can do significant damage. They can also catch fire.

Try using a slide hammer.

My guess, and it is purely a guess, is that it is only needed on the non-discharge side of the desk to facilitate flow out the side discharge. (Flow goes from higher pressure to lower pressure.)

I had this on my RV. With six sensors it monitored all 4 tires and the spare. There are several options based on the number of sensors needed. It worked well and installation was simple.

Kubota’s recommendations don’t make a lot of sense when compared to the 3 pts lifting capability. The owners manuals for both my MFs make no such recommendations. Nor does the manual for a previously owned David Brown.

.

Deleted. Duplicate.

The OP could always go semi mount which puts only half its weight on the pins. Even a 3 pt mount usually has at least 10 inches or so of flex on the top link which provides the same result weight distribution in that range.

Not clear why you think 1k lbs on the 3 pt is your limit. Tractor Data says your machine can handle well over 2k lbs on the 3 pt. At 42 pto hp, you machine would be fine with an 8 ft cutter for grass and likely ok for a mixture of grass and light brush, although you may be limited in how fast...

If it’s so sketchy to buy, imagine the problem getting service, parts, warranty work, etc.

Your are correct. It is based on reports regarding that number. Not perfect but better than nothing. After getting blocked, they either give up or spoof a different number. If I could block all VOIP numbers, I would.

An alternative to the AT&T landline could be cell service. You can keep the same phone number and it is much less than $90/month. (Ours is $25/month.) They can also connect plug it into the homes phone line network so wired extension phones plugged in to that network will work.

Lots of scam calls on VOIP. The calling number is easy to spoof. My cell phone provider blocks most of them based an scam reports. I generally don’t answer calls from numbers I don’t know. The few that get thru to my voice mail never leave a message.

Deleted.

Just how wide is your blade? I can turn the 5 ft. blade around on my Kubota without any difficulty. Your 2 listed machines are larger than my L3240. Are you sure you can’t shorten the top link and then raise the 3 pt sufficiently to gain enough clearance to rotate your blade?

Don’t think blade weight is the only problem. Every scrape blade I have seen is curved. When facing forward it wants to dig unto the road bed. Not so much if you reverse the blade so the curve is pointing backwards. Does more smoothing than digging in.

Good used rotary cutters can be found for MUCH less than that. Some may need a little work but nothing like the that green rust bucket.

It only damages the power inserter, which Directv replaces free of charge. They gave me a bunch several years ago and I still have three left. Part of the problem is the location of our dish. To get a clear line of sight to the satellite, the coax is well over 100 ft. Lomg, making it more...

Our whole house surge protection is installed in the meter panel, between the meter and the supply from the transformer. All our TVs and computer equipment a supplied from battery backed up supplies. They also provide some limited surge protection. Never had a GFCI breaker or outlet affected...

With all that rot, it is likely structurally deficient. Unlikely patching the sheet metal will fix it.

With mechanical linkage, I would typically adjust so there is maybe 1-1/2” to 2” free play in the clutch pedal before the throughout bearing engages the pressure plate fingers. Not sure the service manual would provide this info.

Sounds like something is going on that is preventing the linkage from the clutch pedal fully engaging the clutch fingers via the throw out bearing. Not familiar with the Yanmar setup but typically there is some sort of adjustment in the linkage that is used to get full clutch engagement and...

Info on model no./size would be helpful.

Try Googling “ford 1100 parts” or “ford 1200 parts” and you will see what is available.

Not familiar with your machine or the IronCraft auger. However, the manual for the auger states the angle of the boom on the auger can be adjusted for needed ground clearance by moving the A frame to different mounting holes. Note that the manual for the auger indicates a minimum pto hp of...

Do you have both the W R Long troubleshooting guide and the 3rd function flow diagram? Not sure what more you would need.

They do NOT use the same FEL. A quick search indicates the FEL for the LX3310 is an LA435. The FEL for the LX4010 is an LA545.

If your needs are mostly for moving dirt and gravel, a skidsteer will be more capable than either of the Fords. FELs on tractors are at best a compromise. Unlikely the proceeds from selling the Fords will cover the cost of a fully functional skidsteer.

The owners manual for both my Chevy truck and my wife’s Chevy SUV recommend draining and refilling the cooling system every 150,000 miles. That’s every 10 years based on average annual mileage of 15,000. Not clear why a tractor should so much different.

So does the manual for my L3240. It also calls for flushing the coolant system every 2 years. I did mine after 15 years. Don’t recall what coolant I used for the change. That was ctainly excessive, but whenever I checked the coolant it had no indication of rust (still bright colored) and...

Error

One other issue to consider is its weight. My 700 lb Woods 72 in cutter is relatively easy to hook up the the 3 pt hitch. Sometimes I have to manhandle it using a heavy steel rod or a 2 x 4 to assist lining up with hitch pins. I also have a much heavier 8 ft Bush Hog that weighs about 1700...

The OP indicated his current mowing speed is limited to 1.5 mph due to blade speed and cutting. That does not sound like he is mowing manicured golf fairways. Unlikely the referenced Ferris zero turn machine rated at 24 hp is going to cut significantly faster than his Ford rated at 26 hp...

Interesting that the OP is looking at a very heavy duty 6 ft. cutter. Having stated he did not want to buy “light duty junk that will rust out in 2 years.” My Woods BB72 is much lighter in weight (702 lbs.) than the 1300 lb behemoth he is considering. I have had the lighter duty cutter for...

Two pails of UDT is very heavy. Very expensive shipping other than bulk motor freight. Get your filters from Messick. Find a local source for your fluids.

Not 2020.

This look like their website. https://avi-equipment.com/

If heating and/or rust solvent fails, cut the bolt flush with the blade; then drill out the center of the bolt.

Likely many more than one individual. I suspect in the early days of this website, anonymous posting was allowed (i.e., no login required). Over 29,000 posts but only 9 good posts.

Not as new as you. Just fewer posts.

Lots of solutions to questions the OP never even asked.

https://www.maxxtuff.com/maxxtuff-heavy-duty-rops-rifle-holder

It appears the placement of the spigots are midway (i.e., 90 ft) east to west and 90 ft from the north and south ends. If so, they 100 ft hose will not reach the corners. It would be about 27 ft short.

Is the “Indian” guy native American or Asian?

I had a similar situation. Called 811 and first had them locate the buried line from transformer on pole to the meter at the house. Then asked him to locate the line from the house to the outbuilding. He did it without questioning. Also had him locate buried propane line from tank to the...

My aunt went into assisted living several years ago. I had power of attorney for her and was in the process of cleaning out her home and property to put it up for sale. There was an old home heating oil tank sitting outside that was about 1/2 full of kerosene (~125 gal). I was very concerned...

There is always more than one way to skin a cat!

Your 3 pt is capable of lifting well over 2000 lbs. If you have a rear blade, you can use chains to then use the 3 pt to lift one end of the cut pieces to facilitate it dragging out.

For what it’s worth, that sensor is only used on three Kubota models (L4600DT, L4600F, & L4600H) making it somewhat unique. The sensor on my L3240HST is used in 29 models.

Here is some info from Rapidair Products on materials for compressed air piping. PVC is NOT recommended. https://www.rapidairproducts.com/blog/what-are-the-best-materials-for-compressed-air-piping?srsltid=AfmBOoryM8UN8YfWW521HdwyG0sZiSTgdgna361DKiyQw3JFU4N5z8K9

The one in this post looks to be similar. https://www.tractorbynet.com/forums/threads/yanmar-rs135a-tiller.393232/

https://palletforks.com/products/3-point-ballast-box-fits-category-2-tractors

12awg, 50ft, 3 outlets, but not U.S. made. 3 out of 4 ain’t bad...

Make an ignition switch by adding a switch in series with start switch.

The OP was using a 1/2 ratchet. Pipe and wrench or pipe and anything is jury rigged. One can break anything with a long enough pipe.

I have a MF 265 (Cat 2) with a Pat’s Quick Hitch (Cat 1). Works just fine. All my attachments were Cat 1. (Have since bought a MF 383 which has Cat 2 hitch and a Cat 2 8 ft. Bush Hog. Don’t plan on adding a Quick Hitch to the MF 383, since I don’t currently plan of using any other...

Try a breaker bar.

See Open Burning | NC DEQ Apparently burning paper is illegal in NC.

OP stated he had a FEL which likely has float capability. In my opinion, float capability on rear remotes serves very limited (if any) usefull purpose.

I am not familiar with your machine. Try searching using “MF 2860e rear remote.” You will find several options including prices. The installation instructions should also be available. You might have to request the instructions from the supplier via phone call or email. Good luck!

Try googling (International 574 salvage). Several machines in various states of disrepair will show up.

Not a view from the right side, but the only other page in the section on cruise control from the WSM. Hope it helps.

From the WSM for your machine.

From another thread,

These look similar.

Could be a fuel flow issue. Check the fuel filter. Had similar issue with my L3240, didn’t stall but was greatly under powered when trying to increase speed or climb a hill. Fuel filter had a waxy substance in it. Replaced fuel filter, problem solved

The OP hasn’t posted since May of 2024.

Amazon does that here for some Sunday deliveries. I usually take the option for delayed delivery to avoid Sunday USPS delivery because they are just as bad as Christmas season temp hires.

Currently delivery by Amazon is the best, UPS comes in second, USPS is close third, FedEx is pretty worthless. Prior to Amazon, UPS was great and always had the same driver. USPS was darned good to but I believe that was due to the driver (a really pretty blonde gal). FedEx was ood to but...

Not sure about your machine, but likely there a is relay used to energize the glow plugs. Check the wiring diagram in your shop manual.

One must also consider proper lubrication of bearings, gears, shafts, etc. Not sure about the transmission/rear axle on your machine, but some motor vehicles require dropping the driveshaft when towing using the tow dolly. Proper transmission lubrication does not occur when components are...

Looks like you are using the TractorbyNet App. It is obsolete and no longer supported.

Look up the parts for the LA723 and LA513. Then see if they use the same frame.

I have not done it but the previous property owner did. The bridge was constructed in 1984 and is approx. 20 ft long constructed from creasoted power poles and 2x6s. The previous owner drove his 1/2 ton pickup over the bridge. Unfortunately, they did NOT use treated 2x6s. The 2x6s have...

The operators manual for your machine says absolutely nothing about needing to put a weight box on the 3pt hitch to use the FEL. As menioned in earlier posts, counterweight information is contained in the loader manual. Here is the page from my loader manual. It is for the LA514, LA524 and...

I have one. Haven’t used it since we sold our RV. It was pretty accurate when compared to actual axle weights on scales.

Why disconnect the battery?

Not sure if this is your problem, but it probably did not help. Universal fluid should not be used in machine with hydrostatic transmission. Replacing the fluids might help. Likely worth a try.

IMO, it will be fine. Pretty sure there is no sell by date on those products.

We have a refrigerator on an unheated porch as well as a smaller one in an unheated workshop. Temp gets down into the teens. Never been a problem.

If one is doing real heavy FEL work or majority FEL work, one would be better off using an industrial machine. FELs on farm tractors are at best a comprimise.

Trailers tongue would not rise on a trailer with properly acting trailer brakes. The action of trailer braking would force the nose down.

AGM will cost you more but likely have a longer life. The original battery on my L3240 lasted 14 years. It was still working but definately weaker in cold weather when I replaced it.

Per the table, it is 2.3 CUBIC METERS per hour or 82 cubic feet per hour. That equates to 2.25 gals per hour.

Any one have any experience with the LPG ornatural gas fuel consumption of a Generac generator when operating at low loads (25% or less of rated? The specs from generac only provide consuption estimates at full losd and 50% load.

My estimate is it would be in lbs. it would depend slighty on lift arm speed but mostly on the angle of being out of perfect balance.

The resistance of motion around the lower lift arms is achieved by exerting force in both the x (horizontal) and y (verticle). Any force in the positive y direction (i.e., upward) is supporting some of the weight of the implement.

. In the first example, the top link will be exerting force in both the x and y direction, and in actuallity some, albeit smaller force, in the z direction. In this example the top link would be in compression to provide those forces. In the typical configuration with the top link positioned...

Sorry. The statement in my previous post was not well worded. Both 5th wheel and gooseneck hitches are not “bumper hitches”. Neither are todays reciever hitches but they are similar in that the hitch ball is pretty darn near the same place they would have been on a bumper hitch. I edited...

(Edited) Another non bumper pull type is a 5th wheel hitch. “Bumper pull hitch or bumper hitch” is an old and outdated term that goes back to the days when hitches were physically attached to the bumper. Todays reciever hitches are attached to the frame not the bumper but some old folks like...

That was not the question Runner asked in the post I replied to, (i.e., is 1000 lbs of tension on the top link support correct?).

You are correct. Fx=F∗cos(a) Fy=F∗sin(a) Where F is the magnitude of the force a is the angle (degrees) Fx is the horizontal force Fy is the vertical force The force in tension is the square root ot the sum of the squares of the horizontal and vertical forces. This is just the static load...

See this a lot on Craigslist. The phone number listed on their website is VOIP. Another reason to be wary.

No experience with drawer microwaves but based on previous experience with a microwave that was mounted underneath the counter, they are a pain to use unless you have eyeballs in your navel or lower down. Our normal counter type microwave is mounted in our cabinets at eye level. The first one...

Maybe in the peoples republic of CA. Not likely in free America.

I saw in a recent Kioti ad that the transmission for the K9 has been redesigned and it now provides engine braking. I’m not sure when this redesign went into the K9s. Likely your dealer would know.

My biggest peave with the K9 thus far is the lack of engine braking. The design of the transmission results in engine being disengaged from the wheels when coasting. When coasting downhill, manual braking is required. Not a real big deal but seems like a dumb design.

Left coast rules.

Without being too specific, could you identify the location of the lawless land you are looking to relocate to (State? County? Township?)

The Thieving Bas***** may be new your neighbors.

10k on a 5th wheel is close to 2.500 lbs on the pin.

Scale model testing indicates that the tounge weight needs to be between 10% and 15% of the towed vehicles weight to be stable. My experience indicates in needs to be at least 12%. When towing 10,000 lbs, you would need at least 1,200 lbs on the hitch.

What just as bad or worse is the manufacturer selling machines thru dealers that will not service them.

You might get more replies if you post upon the LS page. You should also remove the specific info regarding the dealers name. Otherwise your post will get removed. Negative info about specifuc dealers is frowned upon.

You replied to a post that is well over 4 years old.

You should follow the instructions in you operators manual regarding tire pressure. The manual for my Kubota specifies 20 psi for those size tires.

Another option would be to hire an RV towing service.

Oh Lord! Not this thread again!

My L3240HST (25 hp to PTO) handles my 6 ft Woods Brush Bull just fine. It does bog down a little when the grass is somewhat overgrown, but it just means going slower. My FEL is always on with either the bucket or the grapple. The Brush Bull weighs 702 lbs.(The L3240’s 3 pt hitch can handle...

Watts are easy to check. Lumens not so much.

The OP provided the Wattage for his light bar. Apply Ohms law from there. The OP also provided his original and replacement alternator output ratings.

Can’t help with the replacement bulbs. You could power your led bar directly from the battery including an inline fuse and a switch to be mounted somewhere convenient.

Blocking (i.e., ignoring) the user with all the items appears to solve the problem.

With what we want to power, we need a 22kW machine. Per the spec sheet, the machine consumes about 2.35 gph of propane at 1/2 load and 3.75 gph at full load. Based on my electric bills for the last 12 months, my average power consumption is less than 3.5 kWh per hour. Generac does not...

??

Google “pressure switch 10 psi no”. It will likely show oil pressure switches but they will also work with water.

You could use a contact thermocouple and an appropriate display/reader.

Your attached documents are not viewable.

ACGO Parts or Wengers.

I can’t imagine that grease should be used in that gearbox. That being said, it apparently came with grease from the dealer and has lasted 10 years. Seems to be ok. Not sure how you could change it anyway, without total disassembly and reassembly.

More specific info on the cutter you are talking about would be most helpful.

Does this parts manual for the BH help?

Unlikely the basic operators manual will provide that level of detail. The parts manual might help though.

The serial number is stamped into the frame of the tractor. On most machines it is towards the front right-hand side of the unit.

Contact Thermocouples on both the Hydraulic cooler inlet and outlet.

Nor do they publish specs on the engines radiator ability to keep the engine cool. You couId install a temperature sensor with indication available to the operator of the hydraulic fluids temperature it the outlet of the hydraulic radiator and/or anyplace else that concerns you.

From a previous thread.

Not sure what specific “specs” you are needing. This site appears to provide some general specifications which includes your machine. https://tractorimports.com.au/products/euroleopard-ft25-series-specifications. Google can be your friend when trying to find some obscure info.

Try Wengers.com. You may need to find out what other machines use the same part no. and then also search for those salvaged machines.

Try this. https://asiantractorparts.com/products/foton-tractor-manuals

Looks like a regular gear puller could be modified by adding the horseshoe shaped piece.

Kubota made a steering wheel puller, part no.07916-51090, but it has been discontinued. Saw a price for it as slightly over $1k. Probably did not sell many of them at that price.

Traffic violations are not civil cases. Most are either infractions or misdemeanors.

Maybe in Nevada since it’s really close to the left coast. Would never get a ticket here or most places I have lived and worked. Dirty snow works just as well also. You may get stopped and warned but that is unlikely. Have never seen washing stations where dirt roads or driveways connect to...

Seems an easy solution to plate readers or cameras could be a muddy vehicle with lots of mud on the plate.

Completed the 400 hour service yesterday. Was able to remove about 2 gals of hydraulic fluid from the fill port using a syphon extractor. Got about 2 1/2 gals total from the two axle drain plugs and close to 5 1/2 gals from the main drain plug on the bottom of the transmission case. Of...

Try Googling Huskvarna crank seal. You did not supply your model no. You may need that info.

Unlikely the siphon drain from the fill port will remove that much fluid, so removal of the drain plugs will still be necessary. The mortar mixing pan is a possibilty but as you mentioned it would be somewhat difficult to get the fluid from that pan to the disposal containers. It could also...

I will try it and let you know. I swear I saw some one on youtube doing it but can’t find it. Maybe I just dreamed it. Am going to use one of the fuel syphon gizmos that are used to fill kerosene heaters.

Thanks! That is the info I was looking for. Quickly swapping even partially filled 5 gal pails when you are on your side or on your stomach is not a picnic and trying to reinsert the drain plug while it’s still flowing could be a messy ordeal. The operators manual indicates that your L3540...

What I called a 5 gal bucket is actually a 5 gal oil drain pan from an auto parts house. It is only about 8 inches tall and will easily fit under the machine. I had thought about using a plastic concrete mixing trough from Lowes. It is also only about 8 inches tall and will hold much for...

I am getting ready to do the 400 hour service on my L3240 HST. The service includes changing the hydraulic filter, the transmission filter and the hydraulic fluid. The hydraulic fluid change requires 11.1 gals. There are three plugs that have to be removed to fully drain the fluid. See the...

Had a similar problem with my L3240 HST. It an inconsistent problem. Check you fuel filter. Mine had some jelly like substance in it. Replaced it and problem went away.

If your dimensions are in inches, the volume is about 118,000 cu in. So it should about 500 gals if my math is correct. But it is still early and I haven’t had my coffee yet.

If properly filled, the rimguard should be below the valve stem when the valve stem is at the top of the tires rotation. You should be able to release the over pressure without loosing the rimguard.

I’m looking at adding rear remotes to my L3240 using a Summit Hydraulic remote kit to supply top and tilt cylinders. The summit kit includes a T connection to return to the tank. Is the T connection really necessary for top and tilt (2 way) cylinders? I have a W R Long 3rd function valve...

Other than lifting to plane off the surface when it is NOT being used, the top link is not necessary when using a land plane. A land plane rides on its skids.

You can use the info in the pressure loss table to calculate the piping head loss. You will still need to determine the head loss for the filter. https://www.hunterindustries.com/sites/default/files/tech_friction_loss_charts.pdf

60 hp will work fine for chipping up to 8 in material. I hate anything gas powered. I’ll go for a diesel powered PTO anytime. I would get one with self feeding capability. Let it feed itself while you go and grab another piece.

Old news!!

We had “ Leaf Filters“ installed about 10 years ago and have had ZERO problems with them. We do NOT have any PINE TREES anywhere near them. They work great. Our roof pitch is pretty steep (8 in 10) which may help, especially when we get the real heavy rains. I suspect some of the previous...

Found this on another site. ”Alternate up and down. Bonus points if each box is rotated an additional 15 degrees so the receptacles spin in a circle as you look around the room.”

See the installation tips for the part Kubota #7K530-71180 JOINT, ROD END

VersaTube sells tube type metal structure kits including barns. Their sizes may be somewhat larger than what you are looking for though. https://www.versatube.com/building-kits/barns-loafing-sheds/barns/

Sounds like problem with your internet. The EA website is still there.

https://hickoryrecord.com/news/local/business/judge-grants-temporary-restraining-order-against-everything-attachments-bank-says-conover-based-company-owes-nearly/article_e58dff36-cf55-11ee-b510-63a181cf88e5.html#tracking-source=home-top-story

And we were almost to 100 pages.

Not my job. I was careful to state “potentially.” Defamation is a complex subject and merely stating something as an opinion does not always ensure the statements are protected free speech.

Lots of potentially libelous statements in this thread.

There was complaining about the horse beating. And there was no statement indicating one did not like seeing it get beat. My statement was agreeing with the Dodge Mans observation. It was merely an observation that you appear to refute. Have at it. You are free to ignore my posts. I still...

It has been previously pointed out that this this thread is beating a dead horse.

OP stated in his first post that the utilities ARE MARKED. They are marked AND in his way.

The one customer that was told about shipping their order on Friday and they would be open this week has made exactly 1 post on TBN.

They have two blades.

With tires your size, you might be better off with wheel weights instead of beet juice.

Anyone with experience with Bad Boy Equipment? I am looking purchasing their 5 ft land grader.

Wonder why the statement said “ probably die of something. I am darn sure we will ALL die of something.

You asked the question originally so you must have at least considered the issue, hopefully not thinking of TBN. Let’s hope there are no scoundrel plantiff attorneys on this website.

So are your thinking TBN has some liability for selling ads to EA?

The video did not show how/when the valve stem failed. The video did appear to show the tires fully inflated after the asphalt was removed. The video also appears to indicate the valve stem failed after it was loaded onto the trailer. So when and how did it fail?

Looks like a defective valve stem. I have torn them in half a couple of time trying to pull them into the hole on the rim but have never seen the internal metal tube separate from the rubber like that. Hope your quick glue fix will work for you but believe it is unlikely to last for long.

Every Scrader valve I have ever seen has a core with a short outer thread which is screwed into the inner thread of the stem.

The have been in the implement business since Jan. 1946. The were incorporated as Everything Attachments in 2007. Prior to that they did business as T C Corriher Implement Co., Inc.

If you have the shop manual, the specs on the battery are likely in there.

All good points. Concentrated hydrogen in the presence of oxygen will also self ignite.

Hydrogen could be generated from the energy produced by fusion, however fusion converts hydrogen to helium.

A dime for a kW hour is pretty cheap these days.

You are correct in that your sentence did say “they.” The previous sentence however was referring to the NRC. Most people people might think the “they” was referring to the NRC. Glad you know better. Most people might think so though since a great portion of the prior discussion involving...

A lot of residential work today (driveways and parking areas) involves using fiberglass reinforcement in lieu of either rebar or wire. Seems to be pretty standard in our area anyway.