Search results

I've got a Workmaster 40 with the 110TL loader. I'm trying to find out if there is any adjustments to the cylinders to level the arms. When I put a 8' pusher on it, the right side (as seen from behind the wheel) hits the ground and the left side is still 2-3" high. I can use hydraulic...

Hey there, thanks for the reply. I forgot to update this thread. As a few folks mentioned, the ground was at fault. The bolt on the frame side is somehow coming loose. I occasionally need to crank it back tight.

So I put it all back together, hit the key, got a quick turn of the starter then gauges and everything died. I jumped the solenoid by direct wiring the starter lug , it spun freely so I hit the key and it fired right up. It can't be a dead spot in the starter, it is brand new, plus the old...

Do you mean the solenoid relay wire? I looked at that, it's wonky for sure, but the connection is solid, and there's 0 ohm resistance between the tractor side and the blade on the solenoid. The gauges not lighting up (or intermittently lighting up) is what makes me think it's the switch...

Thanks for the comments so far. I've tested the battery, battery to starter and ground to battery cables, all check out. I get 12.7v (down .1v after sitting overnight, there's a draw I've known about for years now) at the battery and at the starter, but I get 4.8v at the ignition switch (keyed...

Good thing I'm bald, because I'd have ripped out all my hair due to this thing. Tractor is 2013 workmaster 40 with about 400h on it. For 8 years it has been absolutely reliable, other than a power draw from somewhere that made me keep it on a charger when parked. This year it's like a totally...

Hey all, I've got a 2014 NH workmaster 40 and a lot of thick brush to clear. As you can see in the picture, this is the tractor parked in the middle of what I'd like to clear. Most of it is less than 1.5" thick, but it is dense. Will this tractor be strong enough to pull a rotary cutter big...